FOHERE SKF-AS90FT

FOHERE Commercial Ice Maker Machine

Model: SKF-AS90FT

Manual de instrucțiuni pentru utilizator

1. Introducere

Thank you for choosing the FOHERE Commercial Ice Maker Machine, Model SKF-AS90FT. This appliance is designed to produce clear ice cubes efficiently for both commercial and residential use. It features a daily ice production capacity of up to 100 lbs, a 24 lbs storage bin, dual water inlet options, and a self-cleaning function. Please read this manual thoroughly before operation to ensure proper use, maintenance, and safety.

2. Instrucțiuni de siguranță

To prevent injury to users or damage to the product, always follow basic safety precautions when using electrical appliances. Keep this manual for future reference.

  • Ensure the ice maker is connected to a properly grounded power outlet.
  • Nu folosiți aparatul cu un cablu de alimentare sau o priză deteriorate.
  • Țineți aparatul de gheață departe de sursele de căldură și de lumina directă a soarelui.
  • Nu scufundați aparatul, cablul de alimentare sau ștecherul în apă sau alte lichide.
  • Supravegheați copiii când aparatul este în uz.
  • Deconectați aparatul de gheață înainte de curățare sau de efectuarea oricărei operațiuni de întreținere.
  • Folosiți doar apă potabilă pentru producerea de gheață.
  • Asigurați o ventilație adecvată în jurul unității.

3. Configurare și instalare

3.1 Despachetarea

Carefully remove all packaging materials, including tape and protective films. Inspect the ice maker for any damage during transit. Retain packaging for future transport if needed.

3.2 Plasarea

Place the ice maker on a flat, stable surface. Ensure there is sufficient space around the unit for proper ventilation (at least 5 inches from walls). This model is designed for both freestanding and undercounter installation.

FOHERE Ice Maker installed under counter and freestanding

Image: The FOHERE ice maker shown in both undercounter and freestanding configurations, highlighting its versatile placement options.

3.3 Water Inlet Methods

The ice maker supports two water supply methods:

  • Direct Tap Water Connection: Connect the provided water supply hose to a potable water source and the ice maker's water inlet. Ensure all connections are secure to prevent leaks. A water filter is included for improved ice quality.
  • Bottled Water Intake: Place a standard gallon water jug onto the designated port on top of the ice maker. No additional plumbing is required for this method.
Diagram showing tap water and bottled water connections for the ice maker

Image: A visual guide illustrating the two water inlet methods: direct tap water connection with a filter and bottled water placement on top of the unit.

3.4 Curățarea inițială

Before first use, it is recommended to clean the interior of the ice maker. Refer to the 'Maintenance' section for detailed cleaning instructions.

Video: An official product video demonstrating the setup and initial operation of the FOHERE Commercial Ice Maker Machine.

4. Instrucțiuni de utilizare

4.1 Panoul de control pesteview

The ice maker features an intuitive LED display and control panel. Indicators include Ice, Reservation, Adding Water, Ice Full, Melting, Stoppage, and Clean. Buttons allow for power ON/OFF, ice thickness adjustment (+/-), and activating the reservation/clean functions.

Close-up of the ice maker's control panel and large viewfereastră

Imagine: O imagine detaliată view of the ice maker's control panel with various indicator lights and buttons, alongside the large viewfereastră.

4.2 Procesul de fabricare a gheții

After connecting the water supply and power, press the 'ON/OFF' button to start the ice making cycle. The machine will automatically fill with water and begin producing ice. Each cycle produces 40 ice cubes, with a cycle time of approximately 8-15 minutes depending on ambient temperature and selected ice thickness.

Illustration of high-speed ice making process

Image: A visual representation of the ice maker's high-speed ice production, showing the ice tray and cubes.

4.3 Reglarea grosimii gheții

Use the '+' and '-' buttons on the control panel to adjust the ice cube thickness. Thicker ice takes longer to produce but melts slower, while thinner ice is produced faster. The display will show the selected thickness setting.

Examples of different ice thickness settings and their uses

Image: Demonstrates the adjustable ice thickness feature, showing thin, medium, and thick ice cubes and their suggested applications.

4.4 Funcția de rezervare

The 24-hour reservation function allows you to set a timer for the ice maker to start or stop automatically. This is useful for preparing ice in advance or scheduling shutdown during off-peak hours.

5. Întreținere

5.1 Curățare automată

The ice maker features an automatic self-cleaning function. To activate, press and hold the 'Clean' button for 6-7 seconds. The cleaning cycle will run for approximately 5-6 minutes. It is recommended to perform this cleaning regularly to maintain hygiene and ice quality.

Illustration of the automatic cleaning process

Image: A visual depiction of the automatic cleaning cycle in progress, showing water circulating within the ice maker.

5.2 Curățare regulată

In addition to automatic cleaning, periodically clean the ice storage bin, water tray, and exterior surfaces with a mild detergent and warm water. Rinse thoroughly and dry before resuming operation. Ensure the drain plug is accessible for water drainage during cleaning.

6. Depanare

Dacă întâmpinați probleme cu aparatul de gheață, consultați următoarele probleme și soluții comune:

ProblemăCauza posibilaSoluţie
Aparatul de gheață nu produce gheațăFără alimentare cu apă; problemă cu curentul; nivel scăzut de agent frigorific.Check water connection/bottle; ensure power is on; contact support if refrigerant is suspected.
Cuburile de gheață sunt prea mici sau moiWater temperature too high; ambient temperature too high; dirty condenser.Use colder water; ensure proper ventilation; clean condenser coils.
"Add Water" indicator is onWater tank is empty; water inlet blocked.Refill water tank or check tap water supply; ensure water hose is not kinked.
Zgomot neobișnuit în timpul funcționăriiLoose parts; unit not level; fan obstruction.Check for loose components; ensure unit is on a level surface; clear any fan obstructions.

Dacă problema persistă după încercarea acestor soluții, vă rugăm să contactați serviciul de asistență pentru clienți.

7. Specificații

Detailed technical specifications for the FOHERE Commercial Ice Maker Machine, Model SKF-AS90FT:

CaracteristicăCaietul de sarcini
MarcaFOERE
Numele modeluluiMașină comercială pentru producerea de gheață
Numărul de modelSKF-AS90FT
Dimensiuni produs (D x L x H)33.5 cm x 22.3 cm x 61 cm
Producția de gheață pe zi100 lire sterline
Ice Bin Storage Capacity24 lire sterline
Wattage250 wați
Voltage120 volți
Agent frigorificR600a
Tip materialOţel inoxidabil
Componente incluseIce Maker, Ice Scoop, Ice Basket, Operation Guide, Maintenance Guide

8. Garanție și asistență

This FOHERE ice maker comes with a standard manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions. For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact FOHERE customer support through the retailer where the product was purchased or visit the official FOHERE website-ul.

© 2026 FOHERE. All rights reserved.

Documente conexe - SKF-AS90FT

Preview Fohere Ultrasonic Cleaner Instruction Manual (JX-020S, JX-031S, JX-040S)
Comprehensive user manual for Fohere Ultrasonic Cleaners models JX-020S, JX-031S, and JX-040S. Includes setup, operation, maintenance, and troubleshooting guides.
Preview SKF Изделия для Технического Обслуживания и Смазочные Материалы
Каталог SKF, посвященный изделиям и материалам для технического обслуживания подшипников. Охватывает монтаж, демонтаж, смазывание, выверку и мониторинг состояния для продления сродления сродления срозывание подшипников.
Preview Manual de utilizare pentru aparatul de gheață comercial VEVOR: SKF-B40F, SKF-B45F, SKF-C50F, SKF-C55F
Manual de utilizare complet pentru mașinile de gheață comerciale VEVOR, modelele SKF-B40F, SKF-B45F, SKF-C50F și SKF-C55F. Include ghiduri de configurare, utilizare, siguranță, întreținere și depanare.
Preview berbel Inselhaube Skyline Frame Bedienungs- und Montageanleitung
Umfassende Bedienungs- und Montageanleitung für die berbel Inselhaube Skyline Frame Modelle BIH 100 SKF, BIH 120 SKF, BIH 140 SKF și BIH 160 SKF. Enthält Sicherheitshinweise, Produktinformationen, Installationsschritte, Bedienung, Reinigung, Wartung und Fehlerbehebung.
Preview Manual de utilizare pentru instrumentul de aliniere a curelelor SKF TKBA 40
Acest manual de utilizare oferă instrucțiuni complete pentru operarea instrumentului de aliniere a curelelor SKF TKBA 40, detaliind specificațiile tehnice, gama de aplicații, depanarea și procedurile de întreținere.
Preview Manual de utilizare și ghid pentru mașina de gheață VEVOR KJ-AT25F/SKF-ATA70FT/SKF-ATA80F/SKF-ATA70F
Manual de utilizare complet și ghid de instalare pentru modelele de mașini de gheață VEVOR KJ-AT25F, SKF-ATA70FT, SKF-ATA80F și SKF-ATA70F. Include instrucțiuni de siguranță, utilizare, curățare, întreținere și depanare.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.