Flipsky TFT Advanced Display V2.0 Ebike Instruction Manual

1. Produs terminatview

The Flipsky TFT Advanced Display V2.0 is an ebike cycling computer designed with GPS functionality and IP65 waterproofing. It features a 3.2-inch TFT screen with 240x320 resolution and RGB color support, providing a clear and modern user interface for enhanced cycling and energy management.

Caracteristici cheie:

• Clear graphical layout for improved user experience.
• Comprehensive energy efficiency performance data: Speed, Mileage, Riding time, Power output, Energy recovery, Average energy consumption (Wh/km), Maximum ESC and motor temperatures, and Maximum power during cycling.
• Automatic GPS time calibration with a built-in GPS module, allowing manual time zone setting.
• Multi-language support: Chinese, English, and Russian for diverse users.
• Real-time display of cycling and ESC data for optimized riding habits.
• Compact and lightweight design: 124.4 x 68.1 x 18.5 mm, 116g.
• Enhanced human-computer interaction with ESC energy consumption and maximum data display in riding records.
• Compatible with Flipsky Non VESC ESCs (FTESC), VESC-based ESCs (FSESC), and FOCBOX Unity.

2. Conținutul pachetului

Verificați dacă toate articolele enumerate mai jos sunt incluse în pachetul dumneavoastră:

• TFT display unit
• Suport de fixare
• Cablu de conectare
• Senzor
• Manual de instructiuni
• Carcasă de protecție

3. Specificatii tehnice

The display is designed for durability and performance in various environmental conditions.

4. Ghid de instalare

4.1 Schema electrică

Connect the display to your Electronic Speed Controller (ESC) using the provided UART cable. Ensure the 5V, TX (Transmit), RX (Receive), and GND (Ground) pins are correctly aligned and securely connected. The display supports FTESC (Flipsky Non VESC ESCs), FSESC (VESC-based ESCs), and FOCBOX Unity.

4.2 Configurare inițială

Upon initial power-on, the display will show the Flipsky logo. To access the parameter settings, long press the minus (-) button. This interface allows you to configure various aspects of your ebike setup.

For a visual guide on setting up the display and its various functions, refer to the video below:

5. Instrucțiuni de utilizare

5.1 Funcțiile butoanelor

5.2 Interfețe de afișare

The display features multiple interfaces to show various data:

• Interfață de călătorie: Shows real-time speed, battery level, PAS level, and GPS status.
• ESC Interface: Displays detailed ESC data such as current, voltage, temperature, and power.
• Riding Records Interface: Provides trip distance, average speed, mileage, riding time, and other historical data.
• Interfață de setări: Allows adjustment of various parameters.

5.3 Setări parametri

To enter parameter settings, long press the "-" button. Use the "+" and "-" buttons to navigate and adjust values, and the ON/OFF button to confirm selections.

• ESC Type: Select your ESC type (FTESC, FSESC, FOCBOX).
• Tip motor: Choose between 'Pulleyed' or 'HUB motor'.
• Speed Option: Set speed unit (km/h or mph).
• Număr baterie: Configure battery cell count (3-32S).
• Motor Pulley Teeth: Adjustable range 5-999.
• Wheel Diameter (mm): Adjustable range 5-999.
• Motor Pole Pairs: Adjustable range 3-250.
• CLR Total km: Keep or clear total mileage data.
• Ride Timer Mode: Select 'Only Riding Time' or 'Total Elapsed Time'.
• Calendar Time: Set year, month, day, hour, and minute.
• IAP Mode: Supports firmware updates online.
• GPS Select: Turn GPS function ON or OFF. The GPS icon is green when signal is normal.

5.4 Riding Mode and Records

Double click the "-" button from the main interface to enter riding mode. In riding mode, the display will track and show real-time riding data. To exit riding mode, double click the "-" button again.

La view riding records, long press the "+" button. To clear riding records, long press the "-" button, select "YES" to confirm, then short press the ON/OFF button.

6. Îngrijire și întreținere

• Keep the display clean using a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Asigurați-vă că toate conexiunile sunt sigure și lipsite de coroziune.
• Store the display in a cool, dry place when not in use.
• While IP65 rated, avoid prolonged submersion in water.

7. Depanare

• Display not powering on: Check battery connection and ensure the display is receiving 5V power.
• No data displayed: Verify UART connection to the ESC. Ensure ESC is powered on and configured correctly.
• GPS icon grey: Ensure GPS function is enabled in settings and the device has a clear view of the sky for signal acquisition.
• Incorrect speed/mileage: Check motor type, pulley teeth, and wheel diameter settings in the parameters.
• Probleme cu actualizarea firmware-ului: Refer to the official Flipsky resources for detailed firmware update procedures.

8. Garanție și asistență pentru clienți

This product comes with a 2-month warranty from the date of purchase. For warranty claims or technical support, please contact Flipsky customer service.

For additional documentation, firmware updates, and support resources, please visit the official Flipsky support page or refer to the following link: Flipsky Documentation