Introducere
This manual provides detailed instructions for the installation, operation, and maintenance of the Soundstream MPQ-6BX 1/2 DIN 5-Band Car Audio Equalizer with Digital Bass Reconstruction. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.
Informații de siguranță
- Alimentare electrică: Ensure the unit is connected to a 12V DC negative ground power supply.
- Cablaj: All wiring should be performed with the vehicle's ignition turned off to prevent electrical shorts.
- Montare: Mount the unit securely to prevent movement during vehicle operation. Avoid mounting in locations exposed to direct sunlight, excessive heat, or moisture.
- Ventilare: Asigurați o ventilație adecvată în jurul unității pentru a preveni supraîncălzirea.
- Instalare profesionala: If you are unsure about any installation steps, consult a qualified car audio professional.
Produs terminatview
The Soundstream MPQ-6BX is a compact 1/2 DIN 5-band equalizer designed to enhance your car audio system. It features digital bass reconstruction, a selectable subsonic filter, and flexible input/output options for comprehensive sound control.
Caracteristici cheie:
- 5-Band Equalization: Provides ±18 dB adjustment at 50 Hz, 200 Hz, 1 kHz, 5 kHz, and 20 kHz for precise frequency tuning.
- Digital Bass Reconstruction: Restores low frequencies often lost during audio compression, enhancing bass impact.
- Filtru subsonic: Selectable 35–80Hz filter protects subwoofers from unwanted ultra-low frequencies.
- Intrări versatile: Includes AUX, low-level RCA, and high-level speaker inputs for compatibility with various head units.
- High Output Preampmai în viață: Delivers 7V RMS / 12V peak preamplifier outputs with ultra-low 0.01% Total Harmonic Distortion (THD) and a 110 dB Signal-to-Noise Ratio (SNR).
- Design compact: 1/2 DIN size (7" W x 5.1" D x 1.2" H) for easy installation in tight spaces.
Figura 1: Înclinat view of the Soundstream MPQ-6BX equalizer.
Configurare și instalare
Proper installation is crucial for optimal performance. Refer to the wiring diagram and follow these steps carefully.
Continutul pachetului:
Figure 2: Included components: MPQ-6BX equalizer, remote knob, and installation accessories.
- Soundstream MPQ-6BX Equalizer
- Buton de bas la distanță
- Installation Accessories (wiring harness, mounting hardware)
- Manual de utilizare
Montare:
- Choose a suitable location in your vehicle, such as a 1/2 DIN dash opening or under the dashboard, ensuring it is away from heat sources and moisture.
- Ensure there is enough space for wiring connections and ventilation.
- Fixați unitatea folosind accesoriile de montare furnizate.
Conexiuni cablare:
Figure 3: Rear panel connections for power, inputs, and outputs.
- Conexiune de alimentare:
- Conectați +12V wire to a constant 12V power source (e.g., battery positive terminal) with an inline fuse.
- Conectați GND wire to a clean chassis ground point.
- Conectați REM (Remote) wire to the remote turn-on output of your head unit.
- Conexiuni de intrare:
- Intrare AUX: For external audio devices via RCA.
- Intrare RCA de nivel scăzut: Connect to the RCA pre-out of your head unit.
- High-Level Speaker Input: Use for head units without RCA outputs. Connect directly to speaker wires.
- Conexiuni de ieșire:
- Conectați FAŢĂ, SPATE, și SUB RCA outputs to the corresponding inputs on your ampliificatori.
Instrucțiuni de operare
Familiarize yourself with the controls to optimize your audio experience.
Figure 4: Front panel controls of the MPQ-6BX equalizer.
Controale panoului frontal:
- Volumul principal: Ajustează nivelul general de ieșire al egalizatorului.
- Selectare intrare: Switches between CD (Low-Level RCA/High-Level) and AUX inputs.
- Fader (F/R): Balances the audio output between front and rear channels.
- Level (Digital Bass Processor): Adjusts the intensity of the digital bass reconstruction.
- Subsonic (35Hz/80Hz): Selects the cutoff frequency for the subsonic filter.
- EQ Bands (50Hz, 200Hz, 1kHz, 5kHz, 20kHz): Adjusts the gain (±18dB) for each frequency band.
Rear Panel Settings:
Figura 5: Sus view showing input level, ground isolation, and output voltage comutatoare.
- Input Level (90Hz/150Hz/200Hz): Adjusts the input sensitivity for the digital bass processor. Experiment to find the best setting for your source.
- Ground Isolation (200Ω/GND/ISO): Helps eliminate ground loop noise. Try different settings if you experience hum or hiss.
- Ieșire Voltage (5V/7.5V/10V): Sets the maximum output voltage din preamplifier. Match this to the input sensitivity of your ampliificatori.
Întreţinere
The Soundstream MPQ-6BX is designed for reliable operation with minimal maintenance.
- curatenie: Folosiți o lavetă moale și uscată pentru curățarea unității. Nu utilizați substanțe de curățare abrazive sau solvenți.
- Conexiuni: Verificați periodic toate conexiunile cablurilor pentru a vă asigura că sunt sigure și fără coroziune.
- Mediu: Ensure the unit remains in a well-ventilated area, free from excessive heat, dust, and moisture.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Fără putere | Siguranță arsă, cablaj incorect, conexiune electrică slăbită. | Check inline fuse, verify +12V, GND, and REM connections. Ensure connections are secure. |
| Fără ieșire audio | Selecție incorectă a intrării, conexiuni RCA slăbite, ampLifter nu este alimentat. | Verify Input Select switch position. Check all RCA connections. Ensure ampLifierele sunt pornite. |
| Sunet distorsionat | Input level too high, output voltage mismatch, EQ settings too extreme. | Reduce head unit volume. Adjust Input Level and Output Voltage switches. Reset EQ bands to flat and adjust gradually. |
| Engine noise/hum | Ground loop, poor ground connection. | Ensure a clean, secure ground connection. Experiment with the Ground Isolation switch (200Ω/GND/ISO). |
| Bas slab | Digital Bass Processor level too low, Subsonic filter set too high, EQ bass band reduced. | Increase Digital Bass Processor Level. Adjust Subsonic filter to a lower frequency or off. Increase 50Hz EQ band. |
Specificații
| Numărul de model | MPQ-6BX |
| Benzi de egalizare | 5 (50Hz, 200Hz, 1kHz, 5kHz, 20kHz) |
| EQ Adjustment Range | ±18 dB |
| Filtru subsonic | Selectable 35Hz - 80Hz |
| Ieșire maximă Voltage | 7V RMS / 12V Peak |
| Distorsiunea armonică totală (THD) | 0.01% |
| Raport semnal-zgomot (SNR) | 110 dB |
| Impedanta de intrare | 20 kΩ (AUX/Low-Level), 60 Ω (High-Level) |
| Impedanta de iesire | 150 Ω |
| Raspuns in frecventa | 20Hz - 20kHz |
| Alimentare electrică | 12V DC Negative Ground, PWM Switched |
| Consumul curent | 250mA |
| Dimensiuni (L x A x H) | 7" x 5.1" x 1.2" (17.78 cm x 12.95 cm x 3.05 cm) |
| Greutate | 1.7 lbs (0.77 kg) |
Garanție și suport
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Soundstream webPăstrați bonul fiscal ca dovadă a achiziției pentru reclamații în garanție.
Soundstream Official Website: www.soundstream.com