ACEBEAM E10 2.0 Longest-Range Pocket EDC Flashlight User Manual

1. Introducere

Thank you for choosing the ACEBEAM E10 2.0 Longest-Range Pocket EDC Flashlight. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before operation and retain it for future reference.

Ce este în cutie

• E10 2.0 Flashlight (Battery Included) x 1
• Snur x 1
• Inele O x 2
• Cablu USB x 1
• Manual de utilizare x 1

2. Caracteristicile produsului

• Longest-Range Pocket EDC Flashlight: Compact design (3.47in long, 3.76oz) with a custom TIR optic and CREE XP-LR LED, delivering up to 1,200 lumens and a beam distance of 715 meters.
• Baza magnetica: The magnetic tail cap allows secure attachment to metal surfaces for hands-free operation.
• Reîncărcabil: Features a USB-C rechargeable 16340 battery (included).
• Durabil și robust: Constructed from aerospace-grade AL6061-T6 aluminum with a hard-anodized finish. Rated IP68 for waterproof performance and 1.5-meter impact resistance.
• Ușor de transportat: Designed for everyday carry, fitting easily into pockets.
• Intuitive Side Switch: Provides smooth, one-handed control for mode changes.

Imagine: Pesteview of the ACEBEAM E10 2.0 flashlight highlighting its key features.

3. Configurare

Instalarea bateriei

1. Deșurubați capacul din coadă al lanternei.
2. Insert the included 16340 rechargeable battery with the positive (+) end facing towards the head of the flashlight.
3. Screw the tail cap back on securely. Ensure the O-ring is properly seated to maintain waterproof integrity.

Note: The E10 2.0 is compatible with CR123A batteries, but the included 16340 battery offers USB-C charging capability.

Încărcarea bateriei

Bateria 16340 inclusă are un port de încărcare USB-C încorporat. Pentru încărcare:

1. Unscrew the tail cap and remove the 16340 battery from the flashlight.
2. Locate the USB-C port on the side of the battery.
3. Connect the provided USB-C cable to the battery and a suitable USB power source (e.g., phone charger, laptop).
4. Indicatorul luminos de pe baterie va afișa starea de încărcare (de obicei roșu pentru încărcare, verde pentru încărcare completă).
5. Once fully charged, disconnect the cable and reinsert the battery into the flashlight, ensuring the tail cap is tightened.

Image: The ACEBEAM E10 2.0 flashlight demonstrating its convenient USB-C charging capability.

4. Instrucțiuni de utilizare

The ACEBEAM E10 2.0 features an intuitive side switch for easy operation.

Operare de bază

• Pornire/Oprire: Single press the side switch to turn the flashlight on or off.
• Change Brightness Levels: When the flashlight is on, press and hold the side switch to cycle through Ultra-Low, Low, Medium, and High modes. Release the switch to select the desired brightness.

Moduri speciale

• Modul Turbo: Double-press the side switch quickly to activate Turbo mode (1200 lumens). Double-press again to return to the previously used mode.
• Modul stroboscopic: Triple-press the side switch quickly to activate Strobe mode. Triple-press again to return to the previously used mode.

Funcția de blocare

To prevent accidental activation, the flashlight has a lockout function:

• Activare blocare: When the flashlight is off, press and hold the side switch for approximately 3 seconds until the light flashes briefly, indicating it is locked.
• Dezactivare blocare: Press and hold the side switch for approximately 3 seconds until the light turns on in Ultra-Low mode, indicating it is unlocked.

Image: Illustration of the intuitive side switch and available lighting modes.

5. Întreținere

Curatenie

• Ștergeți corpul lanternei cu o lavetă curată și moale.
• Clean the lens with a lens cloth to maintain optimal light output.

Îngrijirea bateriei

• Charge the battery regularly, especially if the flashlight will not be used for an extended period.
• Depozitați bateria într-un loc răcoros și uscat.

Inele O

• Periodically inspect the O-rings for wear or damage.
• Replace damaged O-rings with the provided spares to maintain the IP68 waterproof rating.
• Apply a thin layer of silicone grease to the O-rings to ensure a good seal and prevent drying.

6. Depanare

• Lanterna nu se aprinde:
      - Ensure the battery is correctly installed with the positive (+) end facing the head.
      - Check if the battery is charged. Remove and charge the battery using the USB-C port.
      - Verify the flashlight is not in lockout mode. Press and hold the side switch for 3 seconds to unlock.
• Lumina este slabă sau pâlpâie:
      - The battery level may be low. Recharge the battery.
      - Ensure the tail cap is fully tightened. A loose connection can cause intermittent power.
• Water ingress after exposure:
      - Check the O-rings for any damage or improper seating. Replace if necessary and ensure they are lubricated.
• Lanterna se încălzește în timpul utilizării:
      - High brightness modes (especially Turbo) generate significant heat. This is normal. The flashlight has built-in thermal regulation to prevent overheating by automatically reducing output.

If you experience issues not covered here, please contact ACEBEAM customer support.

7. Specificații

Image: Detailed technical specifications table for the E10 2.0 flashlight.

8. Garanție și asistență

Informații despre garanție

The ACEBEAM E10 2.0 flashlight comes with a Garanție de 10 an de la producător, asigurând fiabilitate pe termen lung și liniște sufletească.

Asistență pentru clienți

For any questions, technical assistance, or warranty claims, please contact ACEBEAM customer support or visit the official ACEBEAM store online.

Official ACEBEAM Store: Vizitați magazinul