KING LPWV2715-CT24 Vandal Resistant Heater Instruction Manual

1. Produs terminatview

The KING LPWV2715-CT24 is a robust, vandal-resistant electric heater designed for high-traffic and public areas such as detention facilities, public restrooms, and rest areas. Its heavy-duty construction, including a 3/16-inch solid steel frame and grill, provides exceptional durability against impact and abuse. Tamper-resistant screws secure the grill, and controls are recessed to prevent unauthorized access. This unit offers moderate wattage and high airflow to effectively heat entryways and hallways, preventing drafts from affecting the building's core temperature.

Imaginea 1: Față view of the KING LPWV2715-CT24 Vandal Resistant Heater, showcasing its robust metal casing and grill.

Caracteristici cheie:

• Impact/Vandal Resistant: Constructed with a heavy grill and 3/16-inch solid steel frame.
• Pic-A-Watt Elements: Allows for multiple wattage options to suit specific heating requirements.
• Tamper Resistant 3 Position Switch: Offers Fan, Heat, and Off settings, designed to prevent unauthorized adjustments.
• Protecție la supraîncălzire: Integrated safety feature to prevent overheating.

2. Informații de siguranță

Read all instructions carefully before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Instalatie electrica: This heater operates on 277 Volts and requires hardwiring. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
• Împământare: This heater must be properly grounded to reduce the risk of electric shock.
• Locaţie: Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored or used. Maintain proper clearances from combustible materials as specified in the installation section.
• Protecție la supraîncălzire: The heater is equipped with a thermal cut-out to prevent overheating. If the heater shuts off due to overheating, allow it to cool down before attempting to restart. Investigate and correct the cause of overheating.
• Nu acoperiți: Never cover the heater or block its air inlets/outlets. This can cause overheating and fire.
• Întreţinere: Deconectați alimentarea înainte de a efectua orice operațiune de întreținere sau curățare.

3. Conținutul pachetului

Verificați dacă toate componentele sunt prezente și nedeteriorate la deschiderea ambalajului:

• KING LPWV2715-CT24 Vandal Resistant Heater Unit
• Elemente de montare (de obicei incluse)
• Manual de instrucțiuni (acest document)

Dacă lipsesc sau sunt deteriorate articolele, contactați imediat furnizorul.

4. Instalare

AVERTIZARE: Installation must be performed by a qualified electrician. Disconnect all power to the circuit at the main service panel before attempting any wiring.

4.1 Locul de montare

• This heater is designed for indoor, wall-mount installation.
• Choose a location that allows for proper air circulation and maintains required clearances from walls, ceilings, and floors. Refer to local codes for specific clearance requirements.
• Ensure the mounting surface is structurally sound to support the heater's weight (approximately 36 pounds).

4.2 Conexiune electrică

• The LPWV2715-CT24 heater requires a dedicated 277 Volt, 60 Hz, single-phase circuit.
• Încălzitorul atrage 5.4 Amps at 277V, providing 1500 Watts of heat. Ensure the circuit breaker and wiring are appropriately sized for this load.
• Connect the heater directly to the electrical supply using appropriate hardwiring methods and connectors, following the wiring diagram provided inside the heater's access panel.
• Asigurați-vă că toate conexiunile sunt strânse și sigure.

5. Funcționare

Once properly installed and powered, the heater can be operated using its tamper-resistant 3-position switch.

5.1 Setări comutator de alimentare

• OPRIT: The heater is completely off, and no heat or fan operation will occur.
• VENTILATOR: The fan operates continuously without engaging the heating elements. This can be used for air circulation.
• CĂLDURĂ: The heating elements and fan operate to provide warmth. The heater will cycle on and off to maintain the desired temperature if connected to an external thermostat (not included).

5.2 Wattage Selection (Pic-A-Watt)

The LPWV series heaters feature Pic-A-Watt elements, allowing for field-adjustable wattage settings. Refer to the wiring diagram inside the heater for instructions on how to adjust the wattage to suit specific room requirements. This adjustment should only be performed by a qualified technician with power disconnected.

6. Întreținere

Întreținerea regulată asigură performanța optimă și longevitatea încălzitorului. Deconectați întotdeauna alimentarea de la întrerupătorul de circuit înainte de a efectua orice operațiune de întreținere.

• curatenie: Curățați periodic exteriorul încălzitorului cu o lavetă moale șiamp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
• Intrări/Evacuari de aer: Ensure that the air inlets and outlets are free from dust, lint, and other obstructions. Use a vacuum cleaner with a brush attachment to gently clean the grill and internal components if accessible.
• Inspecţie: Annually inspect the heater for any signs of damage, loose wiring, or unusual wear. If any issues are found, contact a qualified electrician for repair.

7. Depanare

Înainte de a contacta serviciul de asistență pentru clienți, reținețiview următoarele probleme și soluții comune:

Dacă problema persistă după încercarea acestor soluții, contactați serviciul de asistență pentru clienți sau un electrician calificat.

8. Specificații

9. Garanție și asistență

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KING webPăstrați bonul fiscal ca dovadă a achiziției pentru reclamații în garanție.

Producător: KING Electrical Manufacturing

Website: www.king-electric.com (Examplinkul, vă rugăm să verificați oficialul website)