AOPUTTRIVER AP-9000F Hot Wire Anemometer User Manual

1. Introducere și Pesteview

The AOPUTTRIVER AP-9000F is a professional handheld hot wire anemometer designed for precise measurement of air velocity, airflow volume (CFM/CMM), and air temperature. This device is equipped with a retractable sensor probe, making it suitable for various applications, including HVAC system diagnostics, environmental monitoring, and industrial air flow analysis. This manual provides essential information for the safe and effective operation of your AP-9000F anemometer.

2. Ce se află în cutie

La despachetare, vă rugăm să verificați dacă toate articolele enumerate mai jos sunt prezente și în stare bună:

• AP-9000F Hot Wire Anemometer Unit
• Manual de utilizare
• Cablu de date tip C

3. Caracteristicile produsului

The AP-9000F anemometer offers a range of features designed for precision and convenience:

• 3-in-1 Measurement: Accurately measures wind speed (m/s, km/h, ft/min, knots, mph), airflow (CFM/CMM), and wind temperature (°C/°F).
• Retractable Sensor Probe: Features a flexible, extendable probe tip for convenient measurements in confined or hard-to-reach spaces, such as air conditioning vents. Probe dimensions: 298.5 × 40.84 × 23.7 mm.
• Display LCD: A clear, backlit LCD presents wind speed (Max, Min, Real-time), airflow, temperature, and humidity data. Includes anti-interference buttons and a low battery indicator.
• Interfață de tip C: Equipped with a Type-C charging port and powered by a 1000mAh lithium-ion battery. Supports an optional auto-shutdown function.
• Aplicație largă: Suitable for environmental measurements, air transportation, and air conditioning monitoring systems.

4. Configurare

4.1 Încărcarea bateriei

The AP-9000F is powered by a built-in 1000mAh lithium-ion battery. Before first use, or when the low battery indicator appears on the LCD, charge the device using the provided Type-C data cable.

• Connect the Type-C cable to the charging port on the anemometer and the other end to a standard USB power adapter (not included).
• O încărcare completă durează de obicei 2 până la 3 ore.
• Nota: The device cannot be turned on or operated while it is charging.

4.2 Extending the Sensor Probe

The hot wire sensor is located at the tip of the retractable probe. Carefully extend the probe to the desired length for measurement. The probe can be rotated 360 degrees for optimal positioning.

• Gently pull the probe from the main unit to extend it.
• Adjust the angle of the probe tip as needed.
• After use, retract the probe back into the unit for protection.

5. Instrucțiuni de utilizare

5.1 Aspectul dispozitivului și butoanele

• Buton de pornire (cerc roșu): Apăsați pentru a porni sau opri dispozitivul.
• Butonul MOD: Switches between different measurement modes (e.g., wind speed, airflow).
• Butonul UNIT: Changes the unit of measurement for wind speed (m/s, km/h, ft/min, knots, mph) or airflow (CFM, CMM).
• Buton SET: Used to set the air volume area for accurate CFM/CMM calculations.
• Butonul MAX/MIN: Toggles between maximum, minimum, and real-time values on the display.
• Țineți butonul apasat: Îngheață citirea curentă de pe afișaj. Apăsați din nou pentru a elibera.
• Butonul °C/°F: Switches the temperature unit between Celsius and Fahrenheit.

5.2 Basic Measurement Procedure

1. Pornire: Apăsați tasta Buton de alimentare to turn on the anemometer. The LCD will illuminate.
2. Extend Probe: Carefully extend the sensor probe and position it in the airflow you wish to measure. Ensure the sensor tip is fully exposed to the air stream.
3. Selectați modul: Apăsați tasta Butonul MOD to select between wind speed, airflow, or temperature measurement.
4. Selectați unitatea: Apăsați tasta Butonul UNIT to choose your preferred unit (e.g., m/s, CFM, °C).
5. Set Area (for Airflow): If measuring airflow (CFM/CMM), press the Butonul SET to input the cross-sectional area of the duct or vent. Refer to the specifications for area input range.
6. Citire măsurătoare: The current readings will be displayed on the LCD.
7. Păstrarea datelor: Apăsați tasta Țineți butonul apasat to freeze the current reading. Press again to resume live measurement.
8. Max/Min/Avg: Utilizați Butonul MAX/MIN la view the maximum, minimum, or average readings recorded during the measurement session.

6. Întreținere

6.1 Curăţarea dispozitivului

• Ștergeți unitatea principală cu o lavetă moale și uscată. Nu utilizați substanțe de curățare abrazive sau solvenți.
• For the sensor probe, gently clean any dust or debris. Avoid touching the delicate hot wire sensor directly.

6.2 Îngrijirea și depozitarea bateriei

• Reîncărcați bateria în mod regulat, chiar dacă dispozitivul nu este utilizat frecvent, pentru a menține starea bateriei.
• Depozitați anemometrul într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
• Ensure the sensor probe is fully retracted and protected during storage.

7. Depanare

If you encounter issues with your AP-9000F, please refer to the following common problems and solutions:

8. Specificații

Detailed technical specifications for the AOPUTTRIVER AP-9000F Hot Wire Anemometer:

9. Garanție și asistență

9.1 Informații despre garanție

AOPUTTRIVER products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms and conditions, or visit the official AOPUTTRIVER website pentru mai multe detalii.

9.2 Asistență pentru clienți

For technical assistance, troubleshooting, or inquiries regarding your AP-9000F Hot Wire Anemometer, please contact AOPUTTRIVER customer support. Contact information can typically be found on the product packaging, the official AOPUTTRIVER website sau prin intermediul platformei dvs. de achiziții.

When contacting support, please have your product model (AP-9000F) and a detailed description of the issue ready.