Lepro SW1 AI Smart Outdoor LED Strip Lights (32.8ft)

Introducere

This manual provides essential information for the safe and effective use of your Lepro SW1 AI Smart Outdoor LED Strip Lights. These 32.8ft IP65 waterproof RGBCW light strips offer tunable white light from 2700K to 5700K and are controlled via the Lepro app and voice commands. Please read these instructions thoroughly before installation and operation.

Ce este în cutie

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea.

• 1 bandă LED de 32.8 ft
• 1 x 9.84ft Cable with Controller
• 1 x Wall Adapter (36V 24W)
• 12 x Cleme de montare
• 12 x Screws for Mounting
• 12 x Anchors for Mounting
• 4 x Cable Clips for Securing Power Supply & Controller
• 4 x Screws for Securing Power Supply & Controller
• 4 x Anchors for Securing Power Supply & Controller
• 1 x Manual de utilizare

Informații importante privind siguranța

• This SW1 strip light is designed for outdoor use with an IP65 waterproof rating, making it dust-tight and protected from low-pressure water jets.
• The power supply (adapter) is nu rated for direct outdoor exposure. It must be placed in an electrical box or a protected, dry location for safe and long-term usage.
• Do not cut the strip lights. The length should be selected to closely match your requirements, as trimming will damage the product and void the warranty.
• Ensure the installation surface is dry and clean before attaching the strip lights.
• Always use the provided screws and clips to securely fasten the adapter, controller, and light strip. Adhesive backing alone may not be sufficient for long-term outdoor installation.
• Interval de temperatură de funcționare: -20°C până la 40°C (-4°F până la 104°F).

Configurare și instalare

Follow these steps for proper installation and initial setup of your LED strip lights.

1. Testați luminile: Before permanent installation, connect the strip light to the controller and power adapter, then plug it into an outlet to ensure all lights function correctly. Do not test while the strip is still rolled up.
2. Pregătiți suprafața: Clean the desired installation surface thoroughly to remove any dust or debris. Ensure it is dry.
3. Secure the Power Adapter: Place the power adapter in a suitable electrical box or a protected, dry outdoor location. It must not be directly exposed to weather elements.
4. Securizarea controlerului: Use the provided clips and screws to securely fasten the controller to a dry, clean surface.
5. Atașați banda LED: Carefully peel away the backing paper from the adhesive on the light strip. Attach the strip to the cleaned surface.
6. Fixați cu cleme: Use the provided clips and screws to further secure the LED strip in place along its entire length. This provides additional stability and ensures long-term adhesion, especially in outdoor conditions.

Conexiune la aplicație

The Lepro SW1 strip light is controlled exclusively via the Lepro app. It is not compatible with the "Lepro Lampux" or "Smart Life" apps.

1. Descărcați aplicația Lepro: Caută "Lepro" in your device's app store and download the official application.
2. Înregistrați un cont: Open the app and follow the prompts to register a new user account.
3. Activați Bluetooth și Wi-Fi: Ensure your phone's Bluetooth is enabled and that your phone is connected to a 2.4GHz Wi-Fi network. The lights only support 2.4GHz Wi-Fi.
4. Activați lumini: Plug in the strip lights to activate them.
5. Adăugați dispozitiv: In the Lepro app, navigate to the homepage and click "Add Device".
6. Find SW1: The app should automatically detect the SW1 device. Select it to proceed.
7. Pair with Wi-Fi: Follow the in-app instructions to pair the device with your 2.4GHz Wi-Fi network.
8. Finalizare: Once paired, the lights are ready for control via the app.

Instrucțiuni de operare

App Control (Lepro App)

The Lepro app provides comprehensive control over your SW1 LED strip lights, offering a wide range of customization options.

• Millions of Color Options: Select from 16 million RGB colors and adjust brightness from 1-100%.
• Alb reglabil: Choose between 2700K warm white and 5700K cool daylight for various moods and year-round use.
• LightGPM 4 - Personalized AI Lighting Designer: This feature learns your preferences and suggests lighting designs. The more you use it, the more tailored the lighting effects become.
• Take a Photo, Get the Vibe: Upload an image (e.g., a room photo, movie poster) to the app, and LightGPM will generate a lighting design that matches the image's colors and mood.
• LightBeats Music Sync: Sync your lights with music played through your phone's microphone for dynamic lighting effects. Keep the music sync page active and the phone screen on for continuous operation.

Control vocal

The Lepro SW1 lights are compatible with Amazon Alexa and Google Assistant for hands-free control.

• Easy Voice Commands: Use simple voice commands to change colors, adjust brightness, or activate specific lighting themes. For example, say "Alexa, turn on the strip lights" or "Hey Google, set the lights to blue."
• Nu este necesar un hub: Direct connection via 2.4GHz Wi-Fi to the Lepro app enables voice control without an additional hub.

Întreţinere

Proper maintenance ensures the longevity and performance of your Lepro SW1 LED Strip Lights.

• curatenie: Periodically wipe the strip lights with a soft, damp cârpă pentru a îndepărta murdăria și resturile. Evitați utilizarea substanțelor chimice dure sau a agenților de curățare abrazivi.
• Inspectați conexiunile: Regularly check the power adapter, controller, and strip connections for any signs of wear, damage, or loose fittings. Ensure the power adapter remains protected in an electrical box.
• Montare sigură: Over time, environmental factors can affect mounting. Periodically check that all clips and screws are securely fastened and the strip is firmly in place.
• Rezistenta la intemperii: While the strip is IP65 waterproof, extreme weather conditions (e.g., heavy storms, prolonged freezing temperatures) can still impact performance. Ensure proper drainage around the installation area.

Depanare

If you encounter issues with your Lepro SW1 LED Strip Lights, refer to the following common solutions.

Specificații

Garanție și suport

Your Lepro SW1 AI Smart Outdoor LED Strip Lights come with a Garanție de 2 an de la producător.

For technical support, warranty claims, or further assistance, please contact Lepro customer service through their official website or the contact information provided in the Lepro app.

De asemenea, puteți vizita Magazinul Lepro pe Amazon pentru informații suplimentare despre produs și resurse de asistență.