Tornado 24 Inch Outdoor Wall Mount Fan Instruction Manual

Introducere

Thank you for choosing the Tornado 24 Inch Outdoor Wall Mount Fan. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your fan. Please read these instructions thoroughly before use and retain them for future reference.

This high-velocity, IPX4 water-resistant fan is designed for industrial and commercial use, delivering powerful airflow up to 7350 CFM. It features a durable construction with rust-resistant aluminum and powder-coated steel, a TEAO ball bearing motor, and cETL listing for safety.

Instrucțiuni importante de siguranță

• Always disconnect the fan from the power source before cleaning, servicing, or moving.
• Nu acționați niciun ventilator cu cablul sau ștecherul deteriorat. Aruncați ventilatorul sau întoarceți-l la o unitate de service autorizată pentru examinare și/sau reparare.
• Nu treceți cablul sub covor. Nu acoperiți cablul cu covoare, șervețele sau acoperiri similare. Aranjați cablul departe de zona de trafic și de unde nu se va împiedica.
• Pentru a vă proteja împotriva șocurilor electrice, nu scufundați unitatea, ștecherul sau cablul în apă și nu stropiți cu lichide.
• Este necesară supravegherea atentă atunci când orice aparat este folosit de copii sau în apropierea acestora.
• This fan is equipped with a GFCI plug to meet U.S. outdoor electrical safety standards. Do not bypass or modify the GFCI plug.
• Ensure the fan is securely mounted to a stable surface before operation.
• Keep hands, hair, clothing, and other objects away from the fan blades during operation to prevent injury.
• Nu utilizați acest ventilator cu niciun dispozitiv de control al vitezei în stare solidă.

Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea.

• Tornado 24 Inch Outdoor Wall Mount Fan Head
• Suport de montare pe perete
• Power Cord with GFCI Plug (10 ft SJTW)
• Elemente de asamblare (piulițe, șuruburi, șaibe)
• Manual de instructiuni

Nota: Mounting bolts (three M8x80 expansion bolts) for concrete or metal surfaces are nu sunt incluse și trebuie achiziționat separat.

Configurare și instalare

1. Despachetați și inspectați: Carefully remove all components from the packaging. Inspect for any damage that may have occurred during shipping.
2. Asamblarea palelor ventilatorului: Attach the fan blades to the motor shaft. Ensure the set screw on the fan hub is positioned TOWARDS the motor for correct airflow direction. Incorrect blade installation will result in poor air movement.
3. Atașați grila: Secure the front and rear grilles around the fan blades. Ensure they are properly aligned and fastened to prevent accidental contact with moving parts.
4. Locație de montare: Choose a suitable mounting location on a concrete or metal surface. This fan is not recommended for wood wall installation. Consider the fan's dimensions (27.1"D x 18.8"W x 32"H) and ensure adequate clearance for oscillation and tilt.
   

   Figura 1: Dimensiunile ventilatorului

5. Install Wall Mount Bracket: Using three M8x80 expansion bolts (not included), securely fasten the wall mount bracket to your chosen concrete or metal surface. Ensure the bracket is level and capable of supporting the fan's weight (approximately 26.46 lbs). The bracket design positions the fan approximately 10 inches off the wall.
6. Atașați ventilatorul la suport: Mount the assembled fan head onto the installed wall bracket, securing it with the provided hardware. Double-check all connections to ensure stability.

Instrucțiuni de operare

The Tornado 24 Inch Outdoor Wall Mount Fan offers two speed settings, oscillation, and vertical tilt for optimal airflow control.

1. Conexiune de alimentare: Plug the fan's 10-foot SJTW power cord into a standard 120V AC outlet. The integrated GFCI plug provides enhanced safety for outdoor use.
2. Controlul vitezei: Use the pull chain switch located on the fan motor to cycle through the two speed settings:
   • Pull 1: Low Speed (6450 CFM)
   • Pull 2: High Speed (7350 CFM)
   • Trageți 3: Oprit
   

   Figure 2: Fan Speed Settings

3. Controlul oscilației: The fan features 75° side-to-side oscillation. To activate or deactivate oscillation, use the knob located on the top of the fan motor housing.
4. Reglarea înclinării verticale: The fan head can be manually tilted up to 25° vertically. Loosen the adjustment knob on the side of the fan, set the desired angle, and then tighten the knob to secure the position.
   

   Figure 3: Oscillation and Tilt Features

Întreţinere

Întreținerea regulată asigură o performanță optimă și prelungește durata de viață a ventilatorului dumneavoastră.

• curatenie: Disconnect the fan from the power source before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces and grilles. Do not use abrasive cleaners or immerse the fan in water. For stubborn dirt, a mild soap solution can be used. Ensure the fan is completely dry before reconnecting to power.
• Motor: The TEAO (Totally Enclosed Air Over) ball bearing motor is designed for durability and requires minimal maintenance. Do not attempt to lubricate the motor.
• Depozitare: If storing the fan for an extended period, clean it thoroughly and store it in a dry, cool place, protected from dust and moisture.

Depanare

Specificații

Figure 4: IPX4 Water Resistance and Certifications

Informații despre garanție

This Tornado 24 Inch Outdoor Wall Mount Fan comes with a 1 ani garanție limitată. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, or to make a warranty claim, please refer to the warranty documentation included with your purchase or contact customer support.

Asistență pentru clienți

For technical assistance, troubleshooting, or warranty inquiries, please contact Tornado customer support.

• Website: Visit the official Tornado website pentru întrebări frecvente și resurse de asistență.
• E-mail: Refer to your product packaging or warranty card for customer service email contact.
• Telefon: Consultați ambalajul produsului sau cardul de garanție pentru numărul de telefon al serviciului de asistență pentru clienți.

When contacting support, please have your model number (HI-FAN-24MOWF-WR-1P-HEX2) and purchase date available.