FULODE STUDIO22+ UHF Wireless In-Ear Monitor System User Manual

1. Introducere

Thank you for choosing the FULODE STUDIO22+ UHF Wireless In-Ear Monitor System. This system provides reliable, high-quality mono audio monitoring for musicians, singers, and stage performers. Operating on the UHF 550–579.25 MHz band with 100 preset frequencies, it ensures stable performance and freedom of movement. Please read this manual thoroughly before operation to ensure proper setup and optimal performance.

Imaginea 1.1: Pesteview of the FULODE STUDIO22+ Wireless In-Ear Monitor System, showing the transmitter, bodypack receiver, and in-ear headphones.

2. Conținutul pachetului

Verificați dacă toate articolele enumerate mai jos sunt incluse în pachetul dumneavoastră:

• 1 x Wireless Desktop Transmitter
• 2 x Wireless Bodypack Receivers
• 2 x Căști intraauriculare
• 2 x Enhanced Antennas
• 1 x cablu audio de 6.35 mm
• 1 x adaptor de alimentare
• 1 x Manual de utilizare (acest document)

Imaginea 2.1: Detaliată view of the package contents and dimensions of the main units.

3. Instrucțiuni de configurare

3.1. Configurarea emițătorului

1. Conectare alimentare: Connect the included power adapter to the DC 12V input on the rear panel of the transmitter and plug it into a power outlet.
2. Atașați antene: Screw the two enhanced antennas onto the ANTENNA connectors on the rear panel of the transmitter. Position them vertically for optimal signal reception.
3. Intrare audio: Connect your audio source (e.g., mixer, audio interface) to the transmitter's audio input jacks (AF IN L/R) using XLR or 6.35mm cables. The rear panel also provides a 6.35mm mixed input and an independent audio input.
4. Rackmount Installation (Optional): If desired, attach the included rackmount brackets to the sides of the transmitter for secure installation in a standard equipment rack.

3.2. Configurarea receptorului bodypack

1. Instalați bateriile: Open the battery compartment on the back of the bodypack receiver and insert two AA batteries (not included), ensuring correct polarity.
2. Conectați căștile: Plug the in-ear monitoring headphones into the 3.5mm PHONES jack on the top of the bodypack receiver.

Image 3.1: Wiring schematic illustrating connections for the transmitter, audio mixer, and bodypack receiver.

4. Instrucțiuni de utilizare

4.1. Pornire/Oprire

• Transmiţător: Apăsați lung pe PUTERE butonul de pe panoul frontal pentru a porni sau opri unitatea.
• Receptor Bodypack: Rotiți VOLUM potentiometer clockwise to turn the receiver on. Rotate counter-clockwise until it clicks to turn off.

4.2. Selectarea frecvenței și a canalului

The system operates on 100 preset frequencies within the UHF 550–579.25 MHz band. Ensure the transmitter and receiver are set to the same group and channel for proper communication.

4.2.1. Transmitter Channel Setting

1. Selectarea grupului: Apăsați tasta SET button once. Use the left or right arrow buttons to select the desired group.
2. Selectarea canalului: Apăsați tasta SET button twice. Use the left or right arrow buttons to select the desired channel within the chosen group.

Image 4.1: Controls and display for adjusting group and channel settings on the transmitter unit.

4.2.2. Bodypack Receiver Channel Setting

1. Selectarea grupului: Apăsați tasta SET button once. Use the SUS/JOS buttons to select the desired group. Press ESC to confirm or exit.
2. Selectarea canalului: Apăsați tasta SET button twice. Use the SUS/JOS buttons to select the desired channel. Press ESC to confirm or exit.

Image 4.2: Controls and display for adjusting group and channel settings on the bodypack receiver.

4.3. Reglarea volumului

Adjust the monitoring volume using the VOLUM potentiometer on the bodypack receiver. Start with a low volume and gradually increase to a comfortable listening level.

4.4. Monitorizarea performanței

The system provides stable mono in-ear monitoring with clear, low-latency audio. The centered sound helps reduce phase issues, feedback, and ambient interference, making it ideal for reliable stage monitoring, vocals, and speech applications. The wireless range extends up to 262 feet (80 meters) in optimal conditions.

Image 4.3: Illustration of the system's wireless reception range, indicating up to 260ft.

5. Întreținere

• curatenie: Use a soft, dry cloth to clean the surfaces of the transmitter and receivers. Avoid using liquid cleaners or solvents.
• Depozitare: Store the system in a dry, cool place away from direct sunlight and extreme temperatures.
• Îngrijirea bateriei: Remove batteries from the bodypack receivers if the system will not be used for an extended period to prevent leakage and damage.
• Îngrijirea antenei: Manevrați antenele cu grijă pentru a evita îndoirea sau ruperea acestora.

6. Depanare

7. Specificații

8. Informații despre garanție

The FULODE STUDIO22+ In-Ear Monitor System comes with a 2 ani garanție from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official FULODE website-ul sau contactați asistența pentru clienți.

9. Asistență pentru clienți

If you encounter any issues or have questions regarding your FULODE STUDIO22+ In-Ear Monitor System that are not addressed in this manual, please contact FULODE customer support. You can typically find contact information on the official FULODE website-ul web sau prin intermediul comerciantului de unde ați achiziționat produsul.

Please have your model number (STUDIO22+) and purchase details ready when contacting support.