SPYMINNPOO S869

SPYMINNPOO S869 Electric LCD Display Meter User Manual

Model: S869

1. Introducere

This manual provides detailed instructions for the installation, operation, and maintenance of your SPYMINNPOO S869 Electric LCD Display Meter. This display is designed to provide clear and precise information about your electric bike or scooter's performance, including speed, battery status, and other essential data. It is compatible with DC 24V, 36V, and 48V systems and features an SM plug for easy connection.

2. Informații de siguranță

Always ensure the power is off before installing or removing the display meter.
Do not attempt to disassemble or modify the display meter, as this may void the warranty and cause damage.
Nu lăsați contorul de afișare departe de temperaturi extreme, lumina directă a soarelui pentru perioade lungi de timp și substanțe corozive.
While the display is designed to be rainproof, prolonged exposure to heavy rain is not recommended.
Ensure all connections are secure to prevent electrical shorts or malfunctions.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

1 x Electric LCD Display Meter (S869)
1 x Manual de utilizare

4. Specificații

Caracteristică	Caietul de sarcini
Model	S869
Material	ABS
Dimensiunea produsului (L x l x H)	Aprox. 80 x 50 x 14 mm (3.15 x 1.97 x 0.55 inci)
Suitable Handlebar Diameter	Aprox. 22.2 mm (0.87 inci)
Voltage Compatibilitate	DC 24V, 36V, 48V
Tip conector	SM Plug (5-core common plug)
Lungimea cablului	Aprox. 1640 mm (64.56 inci)
Greutatea articolului	Aproximativ 138 grame
Tip de afișare	High Definition LCD, Backlit
Caracteristici	Speed, Battery Status, PAS Level, Odometer, Smart Chip

5. Configurare și instalare

Follow these steps to properly install your S869 Electric LCD Display Meter:

5.1 Montarea afișajului

Identify a suitable position on your handlebar (typically near the left grip) that allows for clear visibility and easy access to buttons. The display is designed for 22.2mm handlebars.
Slăbiți șurubul de pe suportul de montare al afișajului.
Place the display bracket around the handlebar and tighten the screw until the display is securely fixed but can still be adjusted for optimal viewunghiul de ing.

Spate view of the SPYMINNPOO S869 Electric LCD Display Meter, demonstrating versatile installation. — **Figure 5.1: Versatile Installation.** Spate view of the S869 LCD Display Meter, showing its mounting bracket suitable for 22.2mm handlebars. This design allows for simple and versatile installation on various electric bikes and scooters.

5.2 Conectarea cablurilor

Locate the SM plug cable extending from your S869 display meter.
Connect this plug to the corresponding SM plug on your electric bike or scooter's controller or wiring harness. Ensure the connection is firm and fully seated.
Traseați cablul cu grijă de-a lungul ghidonului și cadrului, fixându-l cu coliere de cablu dacă este necesar, pentru a preveni interferența cu piesele în mișcare.

Connection diagram for the SPYMINNPOO S869 Electric LCD Display Meter. — **Figura 5.2: Diagramă de conectare.** Illustration detailing the SM plug connection for the S869 LCD Display Meter. It shows a 5-core common plug and a connection light, indicating how the display connects to the electric bike or scooter system. The cable length is approximately 1640mm (64.56 inches).

5.3 Dimensiuni fizice

For reference, the physical dimensions of the S869 display are provided below:

Dimensions of the SPYMINNPOO S869 Electric LCD Display Meter. — **Figura 5.3: Dimensiunile produsului.** Diagram showing the physical dimensions of the S869 LCD Display Meter. The display measures approximately 80mm (3.1 inches) in length and 50mm (2.0 inches) in height. A side view indicates a thickness of 14mm (0.6 inches) and compatibility with 22.2mm (0.87 inch) handlebars.

6. Instrucțiuni de utilizare

The S869 display provides real-time data and control over your electric bike or scooter. Familiarize yourself with the display interface and button functions.

SPYMINNPOO S869 Electric LCD Display Meter showing speed, battery, and odometer. — **Figure 6.1: Display Interface.** Faţă view of the S869 LCD Display Meter, illustrating the main screen interface with real-time data such as current speed, battery level, pedal assist system (PAS) level, and total odometer reading. The three control buttons (+, Power, -) are visible on the left side.

6.1 Pornire/Oprire

Pentru a porni: Țineți apăsat butonul Buton de pornire (middle button) for a few seconds until the display illuminates.
Pentru a opri: Țineți apăsat butonul Buton de pornire again for a few seconds until the display turns off.

6.2 Funcții de afișare

Ecranul LCD oferă următoarele informații:

Viteză: Displays current riding speed (e.g., km/h or mph).
Stare baterie: Indică nivelul de încărcare rămas al bateriei.
Nivel PAS: Shows the current Pedal Assist System level (e.g., 0-5), controlling the motor's assistance.
ODO (Odometru): Displays the total distance traveled.
Distanța călătoriei: (If available) Displays the distance for the current trip.

Close-up of the SPYMINNPOO S869 Electric LCD Display Meter screen. — **Figure 6.2: Detailed Display View.** A detailed close-up of the S869 LCD Display Meter's screen, clearly showing the digital readouts for speed (24.6 km/h), pedal assist system (PAS) level (5), battery charge, and odometer (00002 km). This view highlights the clarity and readability of the display.

6.3 Funcțiile butoanelor

'+' Button (Top): Typically used to increase the PAS level or navigate upwards in menu settings.
Buton de pornire (mijloc): Used to power the display on/off. A short press may cycle through display modes (e.g., ODO, Trip).
'-' Button (Bottom): Typically used to decrease the PAS level or navigate downwards in menu settings.

7. Întreținere

Proper maintenance ensures the longevity and optimal performance of your S869 display meter.

curatenie: Ștergeți ecranul și carcasa cu o lavetă moale șiamp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the screen or casing.
Rezistenta la apa: The display features a rainproof design, offering protection against light rain and splashes. However, avoid submerging the device in water or exposing it to high-pressure water jets.

Spate view of the SPYMINNPOO S869 Electric LCD Display Meter, highlighting its rainproof design. — **Figure 7.1: Rainproof Design.** Spate view of the S869 LCD Display Meter, emphasizing its rainproof construction. The image shows the sealed casing and cable entry point, designed to protect internal components from moisture under rainy conditions. Note: Prolonged exposure to heavy rain is not recommended.

Depozitare: If storing your electric bike or scooter for an extended period, ensure the display is clean and dry. Store in a cool, dry place away from direct sunlight.

Verificarea cablului: Periodically check the connection cables for any signs of wear, cuts, or damage. Ensure all connections remain secure.

8. Depanare

If you encounter issues with your S869 display meter, refer to the following table for common problems and solutions:

Problemă	Cauza posibila	Soluţie
Display does not power on	Conexiune cablu slăbită Nu există alimentare de la baterie Afișaj defect	Check all cable connections, especially the SM plug. Ensure the e-bike/scooter battery is charged and powered on. If connections are secure and power is present, contact support.
No speed reading	Speed sensor issue Conexiune cablu slăbită	Check the speed sensor and its connection to the controller. Verify all display cables are securely connected.
Incorrect data displayed	Setări incorecte Funcționare defectuoasă a senzorului	Refer to your e-bike/scooter controller manual for display settings. Check relevant sensors for damage or loose connections.
Butoanele nu răspund	Defecțiune software Daune fizice	Try powering the display off and on again. Inspect buttons for physical damage or debris.

9. Garanție și asistență

9.1 Informații despre garanție

The SPYMINNPOO S869 Electric LCD Display Meter comes with a manufacturer warranty for 90 days from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9.2 Asistență pentru clienți

For technical assistance, warranty claims, or any questions regarding your SPYMINNPOO S869 Electric LCD Display Meter, please contact your retailer or the manufacturer's customer service. Please have your purchase receipt and product model number (S869) available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.