mGYDY Bafang 810S LCD eBike Display User Manual

1. Introducere

This manual provides essential information for the installation, operation, and maintenance of your mGYDY Bafang 810S LCD eBike Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Informații de siguranță

• Asigurați-vă întotdeauna că afișajul este montat în siguranță înainte de a merge la drum.
• Do not attempt to disassemble or modify the display. This may void the warranty and cause damage.
• Keep the display away from extreme temperatures and direct sunlight for prolonged periods.
• Ensure all connections are dry and properly sealed before use, especially in wet conditions.
• Pay attention to your surroundings while riding. Do not become overly distracted by the display.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• 1 x Bafang 810S LCD Display
• 1 x Display Holder
• Gaskets for installation

4. Produs terminatview

The mGYDY Bafang 810S LCD eBike Display is designed to provide essential riding data and control for your Bafang mid-drive motor system. It features a color VA LCD screen for clear visibility in various lighting conditions.

Imagine: Pesteview of the Bafang 810S display showing various instrument features such as headlamps, speed loop, battery display, speed display, assist gear, fault prompt, walking mode, brake prompt, mileage mode, and mileage display.

Caracteristici cheie:

• Color VA LCD: Lat viewing angle, no flicker, high brightness for better visual effect under sunlight.
• Independent Button: Easy to operate interface.
• Afișare completă a datelor: Speed (Real-time, MAX, AVG), Mileage (Odometer, Trip distance, Riding Time), Battery indicator (5-level, Voltage la sutătagși).
• Luminozitate reglabilă: Day and Night Mode with 5-level brightness adjustment (1: darkest; 5: brightest).
• Assistant Level Control: 3, 5, or 9 adjustable assist levels.
• Mod de mers pe jos: Provides assistance when walking alongside your e-bike.
• Afișare cod de eroare: Indicates system faults.
• Gradul de impermeabilitate: IP65, resistant to rain and splashing water.

5. Specificații

Imagine: Detailed product parameters including dimensions, power supply, waterproof grade, and communication protocol.

6. Configurare și instalare

Verificare compatibilitate:

The 810S display is designed for Bafang mid-drive motors (BBS01, BBS02, BBSHD) that use the Protocolul de comunicare UART si a 5-pin female plug. It is not compatible with CAN protocol motors or male plugs.

Imagine: Visual guide for checking compatibility with UART protocol 5-pin female connectors and Bafang BBS series or hub motors. Incompatible with CAN protocol motors.

Pașii de instalare:

1. Montați afișajul: Install the 810S display holder on the left side of your e-bike's handlebar. The holder is designed for handlebars with a diameter of φ22.2mm (0.87in). Secure it firmly using the provided gaskets and screws.
2. Conectați cablul: Carefully connect the 5-pin female plug of the display to the corresponding 5-pin male plug on your e-bike's wiring harness. Ensure the connection is secure and fully seated.
3. Organizare de cabluri: Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with moving parts.
4. Pornire inițială: After installation, power on your e-bike to verify the display functions correctly.

7. Instrucțiuni de utilizare

The 810S display features an intuitive interface with an independent button for navigation and settings.

Funcții de afișare:

• Indicator de viteză: Shows real-time speed, maximum speed (MAX), and average speed (AVG).
• Indicator de kilometraj: Displays Odometer (total distance), Trip distance, and Riding Time.
• Indicator baterie: Provides a 5-level power indicator and voltage la sutătage for accurate battery status.
• Assistant Level: Adjust pedal assist levels from 0-9 (or 3/5/9 depending on configuration).
• Control faruri: Activate or deactivate your e-bike's headlight (if connected).
• Mod de mers pe jos: Engage for low-speed assistance when pushing the bike.
• Cod de eroare: Displays codes if a system fault is detected.

Imagine: The intelligent instrument panel displaying electricity, speed, current gear, battery level prompt, speed display, PAS levels, walking mode, and mileage time.

Ajustare setări:

• Setare luminozitate: Toggle between Day and Night modes. Adjust brightness through 5 levels (1 being darkest, 5 brightest) to suit ambient light conditions.
• Metric / Imperial: Set units according to your preference (Km/h or Mph, Km or Miles).
• Parolă de pornire: Configure a password for added security (refer to your e-bike controller manual for specific instructions if applicable).

Imagine: Illustration of the display's brightness adjustment feature, showing optimal visibility in both day and night conditions.

8. Întreținere

Proper maintenance ensures the longevity and optimal performance of your 810S display.

• curatenie: Folosiți un moale, damp cloth to clean the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
• Rezistenta la apa: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand rain and splashes, avoid submerging it in water or exposing it to high-pressure washing.
• Depozitare: When not in use for extended periods, store the e-bike and display in a dry, cool place, away from direct sunlight and extreme temperatures.
• Verificarea conexiunii: Periodically check the cable connection for any signs of wear or corrosion. Ensure it remains securely plugged in.

Imagine: The Bafang 810S display demonstrating its IP65 waterproof capability, showing it can resist rain and water splashing.

9. Depanare

If you encounter issues with your 810S display, refer to the following common troubleshooting tips:

• Afișajul nu se pornește:
  • Check if the e-bike battery is charged and turned on.
  • Verify that the 5-pin cable connection between the display and the controller is secure and undamaged.
• No Speed/Mileage Data:
  • Ensure the speed sensor on your e-bike is properly installed and aligned.
  • Check for any loose connections to the speed sensor.
• Cod de eroare afișat:
  • Note down the error code. Refer to your Bafang motor or controller manual for specific error code meanings and solutions.
  • Often, turning the e-bike off and on again can clear temporary errors.
• Citiri inexacte:
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) matches your e-bike's wheel size.

If problems persist, contact the seller or a qualified e-bike technician for assistance.

10. Garanție și asistență

Pentru informații despre garanție și asistență pentru clienți, vă rugăm să consultați documentația furnizată în momentul achiziției sau să contactați distribuitorul. Păstrați dovada achiziției pentru reclamații în garanție.