1. Produs terminatview
The CANDY HOUSE SESAME FACE PRO is an advanced smart lock system offering multiple secure access methods. This device integrates face recognition, palm vein recognition, fingerprint scanning, IC card compatibility, and traditional PIN code entry to provide flexible and reliable security for your home or office.
Caracteristicile cheie includ:
- Metode multiple de deblocare: Face recognition, palm vein recognition, fingerprint, IC card (FeliCa, MIFARE, NFC compatible), and PIN code.
- Precizie ridicată: Designed for high precision with a false recognition rate of less than 0.0001%.
- Recunoaștere facială avansată: Functions effectively in low light conditions and accurately recognizes users with makeup or glasses. Resistant to photo or fake hand attempts.
- Extensive User Capacity: Supports up to 100 registered PIN codes, 100 fingerprints, and 1000 IC cards.
- Gestionare ușoară: Simple registration and deletion processes for all access methods.
Image 1.1: The SESAME FACE PRO smart lock shown with its accompanying smartphone application interface and a facial recognition mesh diagram.
2. Ghid de instalare
2.1 Conținutul pachetului
Înainte de instalare, verificați dacă toate componentele sunt prezente:
- SESAME FACE PRO Main Unit
- 3M Adhesive Tape (2 sets)
- Battery Cover (1 piece)
- Slide Cover (1 piece)
- CR123A 3.0V 1800mAh Batteries (2 pieces)
- Screws for Main Unit Shell (2 pieces, PM type 1.6x5.0mm)
- Screws for Battery Cover (2 pieces, PM type 2.0x9.0mm)
- Slide Cover Anti-Slip Screw (1 piece, M 1.4x4mm)
- Manual de instrucțiuni (1 exemplar)
- Card de garanție (1 copie)
2.2 Instalarea bateriei
The SESAME FACE PRO requires two CR123A lithium metal batteries. Ensure correct polarity when inserting.
- Remove the battery cover from the back of the main unit.
- Insert the two CR123A batteries according to the polarity markings.
- Puneți la loc capacul bateriei și fixați-l cu șuruburile furnizate.
Image 2.1: Proper installation of CR123A batteries within the SESAME FACE PRO unit.
2.3 Montarea dispozitivului
The SESAME FACE PRO can be mounted using either the included 3M adhesive tape or screws, depending on your door surface and preference.
- Choose a suitable location on your door frame or wall adjacent to the door, ensuring it is within reach and at an appropriate height for face recognition.
- Clean the mounting surface thoroughly to ensure optimal adhesion if using tape.
- Attach the 3M tape to the back of the SESAME FACE PRO unit, or mark screw holes for drilling.
- Secure the unit firmly to the chosen surface.
Imaginea 2.2: Față view of the SESAME FACE PRO, highlighting its various sensors.
Imaginea 2.3: Vedere lateralăfile of the SESAME FACE PRO, illustrating its compact design.
2.4 Initial Administrator Registration
Upon first use, you must register an administrator. This user will have privileges to add or remove other users and manage settings.
- Follow the on-screen prompts or refer to the quick start guide for administrator setup.
- Register your face, fingerprint, and a PIN code as the administrator.
3. Instrucțiuni de utilizare
3.1 Deblocarea ușii
The SESAME FACE PRO offers five methods for unlocking:
- Recunoaștere facială: Approach the device, and it will scan your face for recognition.
- Recunoașterea venelor palmiere: Present your palm to the sensor for vein pattern verification.
- Recunoașterea amprentei: Așezați degetul înregistrat pe senzorul de amprentă.
- Cod PIN: Enter your registered PIN code on the keypad.
- Card IC: Tap a registered FeliCa, MIFARE, or NFC-compatible card (e.g., Suica, PASMO, Apple Watch, mobile Suica) to the card reader area.
Image 3.1: Face recognition in action, showing the device scanning a user's face.
Image 3.2: Palm vein recognition, demonstrating how to present your hand for scanning.
Image 3.3: Fingerprint recognition, showing a finger placed on the sensor.
Image 3.4: IC card recognition, illustrating a Suica card being used to unlock the device.
3.2 Încuierea ușii
To lock the door, simply press the lock button on the keypad. The device will confirm the lock status.
3.3 Adding and Deleting Users
Only the administrator can add or delete users. Refer to the detailed instructions in the full manual for specific steps on managing user access for each recognition method.
- Cod PIN: Up to 100 PIN codes can be registered.
- amprentă digitală: Pot fi înregistrate până la 100 de amprente.
- Card IC: Up to 1000 IC cards can be registered.
4. Întreținere
4.1 Înlocuirea bateriei
When the battery level is low, the device will provide an alert. Replace the CR123A batteries promptly to ensure continuous operation.
- Deschideți compartimentul bateriei așa cum este descris în Secțiunea 2.2.
- Scoateți bateriile vechi.
- Insert new CR123A batteries, observing correct polarity.
- Închideți și fixați capacul bateriei.
4.2 Curățare
To maintain optimal performance, especially for the sensors, keep the device clean.
- Ștergeți suprafața cu o cârpă moale și uscată.
- Avoid using abrasive cleaners or solvents that could damage the sensors or finish.
- Ensure the face recognition camera, palm vein sensor, and fingerprint sensor are free from dust and smudges.
Image 4.1: The SESAME FACE PRO is designed with a degree of water resistance for outdoor use.
5. Depanare
If you encounter issues with your SESAME FACE PRO, try the following common solutions:
- Recognition Failure: Ensure the sensors are clean and free from obstructions. Re-register your face, palm, or fingerprint if recognition consistently fails. Ensure adequate lighting for face recognition, though the device is designed for low light.
- Dispozitivul nu răspunde: Check battery levels and replace if necessary. If the device remains unresponsive, perform a factory reset (refer to the full manual for instructions).
- Codul PIN nu funcționează: Double-check the entered PIN. Ensure the keypad is clean and responsive.
- IC Card Not Detected: Ensure the card is compatible (FeliCa, MIFARE, NFC) and placed correctly on the reader. Re-register the card if needed.
Pentru probleme persistente, vă rugăm să contactați serviciul de asistență pentru clienți.
6. Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Marca | CASA DULCELOR |
| Numărul de model | 860013658205 |
| Dimensiunile produsului (Lxlxh) | 2.81 x 4.76 x 9 cm (1.1 x 1.87 x 3.54 țoli) |
| Greutatea produsului | 250 g (0.55 lbs) |
| Culoare | Negru |
| Sursa de alimentare | 2 x CR123A Lithium Metal Batteries |
| Metode de deblocare | Face Recognition, Palm Vein Recognition, Fingerprint, PIN Code, IC Card (FeliCa, MIFARE, NFC) |
| Capacitate cod PIN | Până la 100 |
| Capacitate de amprentă | Până la 100 |
| Capacitatea cardului IC | Până la 1000 |
| Accesorii incluse | 3M Tape (2 sets), Battery Cover, Slide Cover, CR123A Batteries (2), Main Unit Screws, Battery Cover Screws, Slide Cover Anti-Slip Screw, Instruction Manual, Warranty Card |
Image 6.1: Detailed dimensions of the SESAME FACE PRO unit.
7. Garanție și asistență
7.1 Informații despre garanție
The CANDY HOUSE SESAME FACE PRO comes with a standard manufacturer's warranty. Please refer to the included warranty card for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.
7.2 Asistență pentru clienți
For technical assistance, troubleshooting, or any questions regarding your SESAME FACE PRO, please contact CANDY HOUSE customer support. Contact details can typically be found on the official CANDY HOUSE website-ul sau pe cardul de garanție furnizat împreună cu produsul.