1. Introducere
Thank you for choosing the OutdoorMaster Shark II 20PSI High Pressure SUP Air Pump. This intelligent dual-stage electric air pump is designed for efficient and convenient inflation and deflation of inflatable stand-up paddle boards (SUPs), boats, kayaks, and other high-pressure inflatables. Featuring an active cooling system, automatic dual-stage operation, and an auto-off function, it simplifies your preparation for water activities.
2. Informații importante privind siguranța
- Citiți toate instrucțiunile înainte de utilizare.
- This pump is designed for 12V DC power sources only. Do not attempt to connect to other power sources.
- Ensure the power cord and hose are free from damage before each use.
- Nu utilizați pompa în condiții de umiditate și nu o scufundați în apă.
- Nu lăsați copiii și animalele de companie să se apropie de pompă în timpul funcționării.
- Do not block the air intake or exhaust ports during operation.
- Set the correct pressure (PSI) for your inflatable to avoid over-inflation, which can cause damage or injury.
- The pump may become warm during extended use. Allow it to cool down if it overheats.
- Always disconnect the pump from the power source when not in use or during maintenance.
3. Conținutul pachetului
Verificați dacă toate articolele sunt prezente în colet:
- 1 x OutdoorMaster Shark II Air Pump
- 1 x 4.5ft Air Hose
- 1 x 12V DC Car Charger (Power Cord)
- Multiple Nozzles (including H3, C7, S2, Cone-shaped, Round, Beach Ball, Air Mattress, Inflatable Boat/Tent valves)
- 3 x garnituri
- 1 x manual de instrucțiuni
Video 3.1: Un overview of what's included in the OutdoorMaster Shark II pump box.
4. Caracteristicile produsului
- Sistem de răcire activ: Designed for extended use, allowing inflation of up to 3 SUPs consecutively without overheating.
- Powerful Dual-Stage Inflation: Primul stage provides maximum speed at 350L/min for rapid volume fill, while the second stage delivers maximum pressure at 70L/min for high-pressure inflation up to 20 PSI.
- Funcția de oprire automată: Automatically stops inflation once the preset target pressure is reached, preventing over-inflation.
- Funcția de deflație: Quickly deflates inflatables for compact storage and easy packing.
- 12V DC Car Connector: Powered directly from your car's 12V DC outlet, featuring a 12A fuse for enhanced safety.
- Digital Display with Real-Time Monitoring: Set your desired pressure and monitor the current pressure in real-time on the clear digital screen.
- Accesorii versatile pentru duze: Comes with a full set of nozzles to fit most high-pressure inflatables.
5. Configurare
- Conectați furtunul: Screw the flexible air hose securely into the 'Inflate' port on the pump. For deflation, use the 'Deflate' port.
- Selectați duza: Choose the appropriate nozzle attachment for your inflatable's valve. Ensure a snug fit to prevent air leakage.
- Attach Nozzle to Inflatable: Insert the selected nozzle into your inflatable's valve. Make sure the inflatable's valve is in the 'closed' or 'up' position to retain air.
- Conectare la alimentare: Plug the 12V DC car connector into your vehicle's cigarette lighter socket.
- Pornire: Press the power button on the pump's control panel to turn it on.
Video 5.1: Demonstrating the setup and use of the OutdoorMaster Shark II pump.
6. Instrucțiuni de utilizare
- Setați presiunea dorită: Use the '+' and '-' buttons on the control panel to set your desired pressure (PSI). The digital display will show the target pressure.
- Începe inflația: Press the power button to begin inflation. The pump will operate in dual-stage mode: a high-volume first stage followed by a high-pressure second stage.
- Monitorizarea progresului: The digital display will show the real-time pressure as your inflatable fills.
- Oprire automată: The pump will automatically turn off once the preset pressure is reached.
- Deflaţie: To deflate, connect the hose to the 'Deflate' port on the pump and the appropriate nozzle to your inflatable's valve. Press the power button to start deflation.
7. Întreținere
- curatenie: Wipe the pump exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Depozitare: Store the pump and accessories in a cool, dry place away from direct sunlight and extreme temperatures.
- Furtun și duze: Ensure the hose and nozzles are clean and free of debris before storage.
- Filtra: The pump has a built-in sand filter. Periodically check and clean the filter to maintain optimal performance.
8. Depanare
If you encounter any issues with your OutdoorMaster Shark II pump, refer to the table below:
| Cod de eroare | Cauza | Soluţie |
|---|---|---|
| PPP | Pressure does not rise | Verificați dacă există scurgeri de aer |
| UL | Protectie la presiune joasa | Când voltage is >=10V, the code will be cleared |
| Ăăă | Protecție la presiune înaltă | Când voltage is <=17V, the code will be cleared |
| HOT(7) | Supraîncălzire | Răcire necesară |
| E5 | Supraîncălzirea bateriei | Răcire necesară |
| E6 | Protecție la supracurent | Check if the motor is obstructed by foreign objects |
| E8 | Defecțiunea senzorului | Contact the local agent for repair |
9. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numele modelului | SHARK II |
| Supported Pressure Range | 0.5-20 PSI (0.034-1.378 bar) |
| Digital Sensor Accuracy | 0.01 PSI |
| Max Pumping Speed (1st Stage) | 350 l/min |
| Max Pumping Speed (2nd Stage) | 70 l/min |
| Dual Inflators Switch Point | 1 PSI |
| Max Energy Consumption | 10A, 120W (12V) |
| Lungimea cablului de alimentare DC | 9 ft (2.75 m) |
| Lungimea furtunului | 4.5 de picioare |
| Greutate netă | 3.6 lbs |
| Material | Plastic |
| Sursa de alimentare | Electric cu fir |
| Modul de operare | Automat |
| Built-in Sand Filter | Da |
10. Garanție și asistență
The OutdoorMaster Shark II 20PSI High Pressure SUP Air Pump comes with a 1 ani garanție limitată de la data achiziției. Această garanție acoperă defectele de fabricație și defecțiunile în condiții normale de utilizare.
For warranty claims, technical support, or any questions regarding your product, please contact OutdoorMaster customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model information ready.
