Radiomaster Pocket Hall Gimbal Transmitter Remote Control Manual

Introducere

The Radiomaster Pocket is a compact and lightweight remote control transmitter designed for various RC applications. It features Hall gimbals, a foldable antenna, and is available in different versions, including CC2500 and ExpressLRS. This manual provides essential information for setting up, operating, and maintaining your Radiomaster Pocket.

Ce este în cutie

Verificați dacă toate articolele enumerate mai jos sunt incluse în pachetul dumneavoastră:

• 1 x Pocket Radio
• 1 x Custom Carry Pouch
• 1 x cablu USB-C
• 1 x Protector de ecran
• 1 x autocolant
• 1 x Manual (acest document)
• 4 x Low Tension Springs (for gimbals)

Produs terminatview

The Radiomaster Pocket is designed for portability and performance. Key features include:

• Gimbaluri cu efect Hall: For smooth centering and precise response.
• Lumini LED încorporate: To visualize your inputs.
• Design portabil și ușor: Ușor de transportat și depozitat.
• Foldable Antenna: Îmbunătățește portabilitatea.
• Removable Stick Ends: For customization and compact storage.
• Ecran LCD iluminat din spate: Offers a clear balance of size and functionality.
• Compartiment modul extern: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer.
• Compatibilitate baterie 18650: Provides extended battery life (batteries not included).
• Pre-installed EdgeTX Firmware: Ready for advanced customization and control.

Înființat

1. Instalarea bateriei

The Radiomaster Pocket requires two 18650 batteries (not included). To install:

1. Locate the battery compartment on the back of the transmitter.
2. Deschideți capacul compartimentului.
3. Insert two 18650 batteries, ensuring correct polarity.
4. Închideți bine capacul compartimentului bateriei.

2. Pornirea inițială

Press and hold the power button located on the front of the transmitter until the screen illuminates and the EdgeTX firmware loads. The transmitter will perform a self-check upon startup.

3. Antenă și capetele stick-ului

• Antenă: Unfold the antenna to its upright position for optimal signal transmission. Fold it down for storage.
• Stick Ends: The transmitter comes with removable stick ends. You can customize them or remove them for more compact storage.

Instrucțiuni de operare

1. Controale de bază

Familiarizați-vă cu principalele comenzi:

• Gimbaluri: Control primary flight surfaces (throttle, rudder, aileron, elevator).
• Butoane de decupare: Used for fine-tuning channel outputs.
• Butoane de navigare: For menu navigation on the LCD screen.
• Buton de alimentare: Turns the unit on/off and can be used for menu selection.

2. Reglarea Gimbalului

The gimbals can be adjusted for tension and self-centering. Refer to Figure 7 for adjustment points:

• A (I-R): Turn clockwise to disable self-centering (throttle). Turn counter-clockwise to enable self-centering (throttle).
• B (T): To adjust the throttle stick tension. Turn clockwise to increase stick tension. Turn counter-clockwise to decrease stick tension.
• C (UP-DOWN): Turn clockwise to increase vertical stick tension. Turn counter-clockwise to decrease stick tension.
• D (LEFT-RIGHT): Turn clockwise to increase horizontal stick tension. Turn counter-clockwise to decrease stick tension.

Specificații

Întreţinere

• curatenie: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using harsh chemicals or solvents.
• Depozitare: Depozitați transmițătorul într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme. Scoateți bateriile dacă îl depozitați pentru perioade lungi de timp.
• Actualizări firmware: Periodically check the official Radiomaster website pentru actualizări de firmware pentru a asigura performanțe optime și acces la funcții noi.

Depanare

Probleme comune și soluții:

• Transmitter not powering on:
  • Asigurați-vă că bateriile sunt instalate corect și încărcate complet.
  • Verificați polaritatea bateriei.
• No signal to receiver:
  • Verify the antenna is unfolded and in an upright position.
  • Ensure the transmitter and receiver are properly bound. Refer to your receiver's manual for binding instructions.
  • Verificați dacă există interferențe de la alte dispozitive de 2.4 GHz.
• Gimbal response issues:
  • Check gimbal tension settings as described in the "Gimbal Adjustment" section.
  • Calibrate gimbals through the EdgeTX firmware settings if necessary.

For further assistance, please refer to the official Radiomaster support resources or community forums.

Informații importante privind siguranța

• Always operate your RC equipment responsibly and in accordance with local laws and regulations.
• Ensure your batteries are in good condition and charged properly.
• Never operate your RC model near people, animals, or property that could be damaged.
• Perform pre-flight checks before each use to ensure all controls are functioning correctly.
• Keep the transmitter away from water and moisture, as it is not water resistant.

Garanție și suport

For information regarding warranty coverage, technical support, or service, please visit the official Radiomaster website-ul web sau contactați distribuitorul autorizat. Păstrați dovada achiziției pentru a putea solicita garanție.