DieseRC Wireless Roller Shutter Remote Control Switch User Manual

1. Introducere

This manual provides comprehensive instructions for the installation, operation, and programming of your DieseRC Wireless Roller Shutter Remote Control Switch. This device is designed to wirelessly control AC motors, enabling forward, reverse, and stop functions for applications such as garage doors, electric gates, and roller shutters. Please read this manual carefully before use to ensure proper functionality and safety.

2. Conținutul pachetului

• 1 x Relay Receiver Board
• 2 x Transmitters (battery included)
• 1 x Manual de produs

3. Specificații

4. Configurare

4.1 Măsuri de siguranță

• Asigurați-vă că alimentarea este deconectată înainte de orice cablare.
• Wiring should be performed by a qualified electrician if you are unsure.
• Verify correct polarity (Live, Neutral) to avoid damage or short circuits.

4.2 Wiring the Receiver

Connect the receiver to your AC motor and power supply according to the diagram below. The receiver supports AC 90V-250V input. Ensure secure connections for all wires.

Image: Receiver dimensions and wiring diagram. Note the 'Up' and 'Down' motor connections and AC 90-250V power input.

The receiver features large screw ports for easy installation and metal clips for secure wiring. A transparent flip cover allows for circuit adjustment.

Imagine: Detaliată view of the receiver's screw terminals and cable compatibility.

4.3 Pornirea inițială

After wiring, apply power to the receiver. The indicator light on the receiver will illuminate, indicating it is ready for operation or programming.

4.4 Produs terminatview Video

Video: Acest videoclip oferă o imagine de ansamblu asupraview of the DieseRC 2201COM receiver and KT03 remote control, highlighting their design and features.

5. Moduri de operare

The DieseRC remote control switch supports three main operating modes: Momentary, Toggle, and Latched. All products are set to Toggle mode before shipment. If you wish to change the operating mode, you must first reset the receiver (see Section 6.2).

Image: Visual representation of Momentary, Toggle, Latched, and Delay operating modes.

5.1 Mod Momentar

• Apăsați și mențineți apăsat butonul „▲" button: The motor rotates forward.
• Release the button: The motor stops.

5.2 Comutare mod

• Apăsați butonul „▲" button once: The motor rotates forward.
• Apăsați butonul „▲" button again: The motor stops.

5.3 Mod blocat

• Apăsați butonul „▲" button: The motor rotates forward.
• Apăsați butonul „▼" button: The motor rotates backward.
• Apăsați butonul „■" button: The motor stops.

5.4 Cerere Examples

Imagine: Example of the remote control switch used for a garage door.

Video: This video demonstrates various applications of the DieseRC Wireless Roller Shutter Remote Control Switch, showcasing its functionality in controlling different types of AC motors.

6. Programarea telecomenzilor

The receiver can store up to 20 transmitters. Follow these steps to program your remote control to the desired operating mode.

Image: Step-by-step programming instructions for different modes.

6.1 Learning a Remote Control

1. Press the learning button on the receiver:
   • Presa 1 dată for Momentary Mode.
   • Presa de 2 ori for Toggle Mode.
   • Presa de 3 ori for Latched Mode.
   Wait 3 seconds after pressing.
2. Apăsați butonul „▲" button on your remote control. Wait 3 seconds.
3. Apăsați butonul „▼" button on your remote control. The programming is successful.

Note: For Latched Mode, the remote control requires 3 keys (Forward, Reverse, Stop).

6.2 Resetting the Receiver

To clear all programmed remote controls from the receiver's memory:

• Apăsați butonul de învățare de pe receptor de 8 ori.

Important: After resetting, all previously programmed remote controls will no longer work and must be re-programmed.

6.3 Video demonstrativ de programare

Video: A step-by-step video guide on how to program the DieseRC 2201COM receiver, covering the different operating modes and remote control pairing.

7. Întreținere

7.1 Înlocuirea bateriei transmițătorului

The remote control transmitters use 2 x CR2016 batteries. If the remote's range decreases or it becomes unresponsive, replace the batteries. Refer to the transmitter image for visual guidance.

Image: DieseRC remote control transmitter.

7.2 Curățare

Wipe the receiver and transmitters with a dry, soft cloth. Do not use abrasive cleaners or solvents.

7.3 Condiții de mediu

Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight. Ensure the receiver is installed in a location with adequate ventilation.

8. Depanare

• Telecomanda nu răspunde:
  • Check the battery in the transmitter. Replace if necessary.
  • Ensure the receiver has power.
  • If the receiver was recently reset, re-program the remote control (see Section 6.1).
  • Ensure the remote is within the effective operating range (20-50 meters).
• Motor not moving:
  • Verificați dacă toate conexiunile cablurilor sunt sigure și corecte (consultați Secțiunea 4.2).
  • Check the power supply to the receiver and motor.
  • Ensure the motor itself is functioning correctly.
• Interferență:
  • While multiple remote control sets can be used in the same area without interference (except in Momentary mode), strong local RF interference might affect performance. Try relocating the receiver if possible.

9. Garanție și asistență

DieseRC products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact your retailer. If you encounter any issues or require technical assistance, please reach out to DieseRC customer support through the vendor's contact information provided at the point of purchase.