1. Introducere
This manual provides essential information for the proper setup, operation, and maintenance of your new Generic Replacement Remote Control. This remote is designed to function with specific JVC Micro Compact Component Stereo Systems, including models CA-UXQ30, SP-UXQ10, and SP-UXQ10S.
Vă rugăm să citiți cu atenție acest manual înainte de a utiliza telecomanda pentru a asigura performanțe optime și o lungă durată de viață.
2. Produs terminatview
The Generic Replacement Remote Control is a dedicated infrared (IR) remote designed to replace original remote controls for compatible JVC stereo systems. It features a compact design and is made from durable ABS material.
Caracteristici cheie:
- Înlocuire directă: Functions as a replacement for original remote controls for specified JVC models.
- Nu este necesară programarea: Ready to use after battery installation.
- Construcție durabilă: Made of ABS material for comfortable handling and durability.
- Performanță stabilă: Offers reliable operation with a long transmission distance.
Figura 2.1: De sus în jos view a telecomenzii.
Figura 2.2: Înclinat view of the remote control, showing button details.
3. Configurare
3.1 Instalarea bateriei
The remote control requires batteries for operation. Batteries are nu sunt incluse with the remote control and must be purchased separately.
- Localizați compartimentul bateriei de pe spatele telecomenzii.
- Deschideți capacul compartimentului bateriei.
- Insert new batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Închideți bine capacul compartimentului bateriei.
Informații importante despre baterie:
- Nu amestecați bateriile vechi și noi.
- Nu amestecați diferite tipuri de baterii (de exemplu, alcaline și reîncărcabile).
- Scoateți bateriile dacă telecomanda nu va fi utilizată pentru o perioadă lungă de timp, pentru a preveni scurgerile.
3.2 Configurare inițială
This replacement remote control requires no programming or setup. Once batteries are correctly installed, it is ready for use with compatible JVC stereo systems.
4. Instrucțiuni de utilizare
To operate your JVC stereo system using this remote control, point the remote directly at the infrared sensor on your stereo system. Ensure there are no obstructions between the remote and the stereo system.
4.1 Funcții de bază
The remote control provides access to various functions of your JVC stereo system. Common functions include:
- Pornire/Oprire: Use the STANDBY O/I button to turn the system on or off.
- Controlul volumului: Use the VOLUME + and - buttons to adjust the sound level.
- Selectarea sursei: Buttons like CD, TUNER, TAPE, AUX, etc., allow you to switch between different audio sources.
- Comenzi de redare: Buttons such as Play, Pause, Stop, Fast Forward, Rewind, and Skip are available for media playback.
- Tastatură numerică: For direct track selection or radio station tuning.
Note: As a replacement remote, some advanced or specific functions of your original remote may not be supported or may operate differently. This is not indicative of a defect.
4.2 Performanță optimă
- Maintain a clear line of sight between the remote control and the stereo system's IR receiver.
- Ensure the remote control is within the effective operating range (typically up to 20 feet or 6 meters).
5. Întreținere
5.1 Curăţarea telecomenzii
Pentru a curăța telecomanda, folosiți o lavetă moale și uscată. Pentru murdăria persistentă, ștergeți ușorampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals, solvents, or abrasive cleaning pads, as these can damage the remote's surface or internal components.
5.2 Înlocuirea bateriei
Replace batteries when the remote control's response becomes sluggish or stops working. Refer to Section 3.1 for battery installation instructions. Always replace all batteries at the same time with new ones of the same type.
6. Depanare
6.1 Telecomanda nu răspunde
- Verificați bateriile: Asigurați-vă că bateriile sunt introduse corect, respectând polaritatea (+/-) și că nu sunt descărcate. Înlocuiți-le cu baterii noi, dacă este necesar.
- Linia de vedere: Verify there are no obstructions between the remote control and the stereo system's IR receiver.
- Distanţă: Asigurați-vă că vă aflați în raza de acțiune efectivă a telecomenzii.
- Senzor IR: Confirm the IR sensor on your stereo system is clean and not blocked.
6.2 Some Functions Do Not Work
This remote is a replacement unit. It is designed to replicate the primary functions of the original remote. However, due to variations in original remote designs and specific model features, some advanced or less common functions may not be supported. This is normal for replacement remotes and does not indicate a defect in the product.
7. Specificații
| Tip de produs | Telecomanda de schimb |
| Dispozitive compatibile | JVC CA-UXQ30, SP-UXQ10 Micro Compact Component Stereo System (and SP-UXQ10S) |
| Comunicare fără fir | infraroșu (IR) |
| Material | ABS/Plastic |
| Sursa de alimentare | Baterii (nu sunt incluse) |
| Culoare | SP-UXQ10 & SP-UXQ10S (Refers to the compatible model variant, actual remote color may vary as per product description) |
Note: The color of the remote control may be sent randomly as per manufacturer's discretion.
8. Garanție și asistență
Specific warranty information for this Generic Replacement Remote Control is not provided in the product details. For any warranty-related inquiries or technical support, please contact the seller or retailer from whom you purchased the product directly.
It is recommended to retain your purchase receipt as proof of purchase.
