DQFART Beginner Tattoo Machine Kit

DQFART Beginner Tattoo Machine Kit Instruction Manual

Model: Beginner Tattoo Machine Kit

1. Introducere

This manual provides essential instructions for the safe and effective use of your DQFART Beginner Tattoo Machine Kit. Please read all instructions carefully before operating the equipment. This kit is designed for beginners and includes all necessary tools for practice and learning.

2. Informații de siguranță

Avertismente importante de siguranță:

  • This product is suitable for adults. Keep all components out of reach of children to prevent accidental ingestion or injury.
  • Always ensure your workspace is clean, sterile, and well-lit.
  • Use only sterile, single-use needles. Dispose of used needles properly in a sharps container.
  • Wear appropriate personal protective equipment, including gloves, during setup and operation.
  • Do not use the tattoo machine near water or in damp environments. The device is not water-resistant.
  • Asigurați-vă că toate conexiunile sunt sigure înainte de a porni dispozitivul.
  • If you are new to tattooing, practice extensively on synthetic practice skin before attempting to tattoo on human skin.
  • Consult with a professional or local regulations regarding proper tattooing techniques and hygiene practices.

3. Conținutul trusei

Your DQFART Beginner Tattoo Machine Kit includes the following components:

  • Tattoo Machine (Pen Style) x 1
  • Tattoo Power Supply (TPN-020) x 1
  • Mixed Model Tattoo Needles x 10
  • Tattoo Foot Switch x 1
  • Tattoo Transfer Paper x 2
  • Tattoo Gloves x 2
  • Tattoo RCA Cable x 1
  • Tattoo Practice Skin x 1
  • Tattoo Bandage x 1
  • 5ml Tattoo Ink (Assorted Colors) x 7
  • Tattoo Ink Cups x 20
  • Manual de instrucțiuni x 1 (Acest document)
DQFART Beginner Tattoo Machine Kit Components

Imagine: Pesteview of the DQFART Beginner Tattoo Machine Kit components.

4. Configurare

Follow these steps to set up your tattoo machine kit:

  1. Conectați sursa de alimentare: Plug the power cord into the 'PLUG IN' port on the tattoo power supply (TPN-020) and then into a suitable electrical outlet.
  2. Connect the Foot Switch: Insert the foot switch cable into the 'FOOT PEDAL IN' socket on the power supply.
  3. Connect the Tattoo Machine: Attach one end of the RCA cable to the RCA interface on the tattoo machine and the other end to the 'CLIP CORD IN' socket on the power supply.
DQFART Tattoo Power Supply TPN-020 with labeled ports

Image: The DQFART TPN-020 power supply showing the 'PLUG IN', 'CLIP CORD IN', 'FOOT PEDAL IN', 'INDICATOR LIGHT', and 'VOL BUTTON'.

DQFART Tattoo Power Supply TPN-020 detailed view de prize

Imagine: Detaliată view of the power supply sockets, indicating compatibility with most tattoo clip cords and foot pedals.

DQFART Tattoo Machine RCA Interface

Image: The RCA interface on the tattoo machine, designed for better transmission performance.

  1. Install the Needle Cartridge: Carefully insert a sterile needle cartridge into the front of the tattoo machine. Twist or push until it clicks securely into place. The machine is compatible with 99% of all-in-one needles on the market.
DQFART Tattoo Machine Pin Interface

Image: The tattoo machine's pin interface, demonstrating compatibility with various needle types.

DQFART Mixed Tattoo Needle Cartridges

Image: A selection of DQFART mixed tattoo needle cartridges (1RL, 3RL, 5RL, 7RL, 5RS, 7RS, 7M1, 9M1, 7RM, 9RM).

  1. Pregătiți cerneala: Pour a small amount of desired tattoo ink into a sterile ink cup.
  2. Prepare Practice Skin: Place the practice skin on a stable, clean surface.
DQFART Multicolor Tattoo Ink Bottle

Image: A 5ml bottle of DQFART multicolor tattoo ink, showing its dimensions and examples of tattoo art.

5. Funcționare

Once the kit is set up, follow these steps for operation:

  1. Pornire: Turn on the power supply. The indicator light on the power supply will illuminate.
  2. Ajustare Voltage: Use the 'VOL BUTTON' on the power supply to adjust the voltage to your desired setting. Start with a lower voltage and gradually increase as needed for your practice.
  3. Engage Machine: Press the foot switch to activate the tattoo machine. The machine will begin to operate. Release the foot switch to stop.
  4. Dip Needle: Gently dip the tip of the needle cartridge into the ink cup to load ink.
  5. Practica: Begin practicing on the synthetic practice skin. Maintain a steady hand and consistent depth.

The DQFART tattoo machine is versatile and can be used for various applications beyond traditional tattooing, such as striped hair simulation, eyeliner, and lip lining on practice skin.

DQFART Tattoo Machine Suitable for Multiple Purposes

Image: The DQFART tattoo machine illustrating its suitability for multiple purposes including tattoo, striped hair, eyeliner, and floating lips.

6. Întreținere

Proper maintenance ensures the longevity and performance of your tattoo kit:

  • Curățarea mașinii: After each use, disconnect the machine from the power supply. Wipe down the exterior of the tattoo machine with a clean, damp Nu scufundați aparatul în apă.
  • Eliminarea acului: Always dispose of used needle cartridges immediately into a designated sharps container. Never reuse needles.
  • Îngrijirea sursei de alimentare: Keep the power supply clean and dry. Avoid spilling liquids on it.
  • Depozitare: Store all components of the kit in a clean, dry, and cool place, away from direct sunlight and moisture.

7. Depanare

If you encounter issues with your DQFART Tattoo Machine Kit, refer to the following common problems and solutions:

  • Aparatul nu pornește:
    • Check if the power supply is properly plugged into the wall outlet.
    • Ensure the power cord is securely connected to the power supply.
    • Verify that the RCA cable is firmly connected to both the machine and the power supply.
    • Confirm the foot switch is properly connected and functioning.
  • Needle Not Moving Correctly:
    • Ensure the needle cartridge is fully and correctly inserted into the machine.
    • Check for any obstructions in the needle housing.
    • Verificați voltage setting on the power supply is adequate.
  • Supraîncălzirea mașinii:
    • Allow the machine to cool down. Prolonged continuous use at high voltage can cause overheating.
    • Asigurați o ventilație adecvată în jurul mașinii.

Dacă problemele persistă, vă rugăm să contactați serviciul de asistență pentru clienți.

8. Specificații

Tattoo Machine:

  • Brand: DQFART
  • Greutate: Aproximativ 80 g
  • Dimensions: 11.3 cm (4.4 in) length, 2.2 cm (0.86 in) diameter
  • Interface: RCA
  • Needle Compatibility: 99% all-in-one needles
DQFART Tattoo Machine Product Size

Image: The DQFART tattoo machine with dimensions indicating 11.3cm (4.4in) length and 2.2cm (0.86in) diameter.

Tattoo Power Supply (TPN-020):

  • Vol. De intraretage: 90V ~ 265V
  • Curent de ieșire: 1.5 A

Tattoo Ink:

  • Name: Tattoo Ink
  • Capacity: 5ml per bottle
  • Dimensiune: 69 mm x 17.5 mm
  • Net Weight: 8g per bottle

General:

  • Manufacturer: DQFART
  • ASIN: B0DPBVXKJD
  • Interval de vârstă: Adult
  • Nivel de rezistență la apă: nu este rezistent la apă

9. Garanție și asistență

For warranty information, technical support, or any questions regarding your DQFART Beginner Tattoo Machine Kit, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase receipt or order number handy for faster service.

© 2024 DQFART. All rights reserved.