1. Introducere
The Aune S17 Pro EVO is a high-performance headphone amplifier și pre-amplifier designed for discerning audio enthusiasts. Featuring a pure Class-A, fully-discrete, and fully-balanced circuit design, it delivers exceptional sound quality and powerful output for a wide range of headphones and In-Ear Monitors (IEMs). This manual provides essential information for setting up, operating, and maintaining your S17 Pro EVO to ensure optimal performance and longevity.
Figure 1: Aune S17 Pro EVO Headphone Amplifier (negru)
2. Instrucțiuni de siguranță
- Voltage Avertisment: This product must be used at 110V voltage. Volumul excesivtage will damage the product and void the warranty.
- Nu expuneți dispozitivul la ploaie, umezeală sau temperaturi extreme.
- Nu deschideți c.asing. Apelați la personal calificat pentru toate lucrările de service.
- Asigurați o ventilație adecvată în jurul dispozitivului pentru a preveni supraîncălzirea.
- A nu se lăsa la îndemâna copiilor.
3. Conținutul pachetului
Vă rugăm să verificați conținutul pachetului la despachetare. Dacă lipsesc sau sunt deteriorate articolele, contactați distribuitorul.
- Aune S17 Pro EVO Headphone Amplifier Unit
- Cablu de alimentare
- Manual de utilizare
- Remote Control (All-Aluminum)
4. Produs terminatview
4.1. Panoul frontal
Figura 2: Aspectul panoului frontal
- Ieșiri pentru căști: 6.35mm, 4.4mm Balanced, 4-pin XLR Balanced.
- Afişa: 4-inch screen showing volume, input, gain, and quiescent current.
- Buton multifuncțional: Controls volume, input selection, and other settings.
4.2. Panoul din spate
Figura 3: Conexiuni panou spate (Example, actual may vary slightly)
- Intrări audio: XLR Balanced, RCA Unbalanced.
- Preamp Ieșiri: XLR Balanced, RCA Unbalanced.
- Putere de intrare: AC 110V.
4.3. Caracteristici cheie
- Twin JFET Design: High input impedance and rich sound, with stable mid-point voltage.
- Pure Class-A Ampcalificare: Mellow, warm, and smooth sound.
- Dual Gain Levels: Optimized for both sensitive IEMs and power-hungry headphones (up to 7.5W output).
- R2R Electronic Volume Chip: High control precision, excellent channel balance, wide soundstage, and accurate positioning.
- Fully-Discrete, Fully-Balanced Circuitry: Ensures high fidelity and minimal interference.
- Sursă de alimentare robustă: 50W low-ripple toroidal transformer and 19200µF capacitor array for powerful and rich sound.
- Sistem avansat de răcire: 3-dimensional cooler structure for stable Class-A operation and overheat protection.
5. Configurare
- Plasare: Place the S17 Pro EVO on a stable, flat surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight.
- Conexiune de alimentare: Connect the provided power cable to the AC 110V input on the rear panel and then to a suitable power outlet.
- Conexiune la sursă: Connect your audio source (e.g., DAC, CD player) to the S17 Pro EVO using either the XLR Balanced or RCA Unbalanced input ports on the rear panel.
- Output Connection (Headphones): Plug your headphones into one of the front panel outputs (6.35mm, 4.4mm Balanced, or 4-pin XLR Balanced).
- Output Connection (Preamp - Optional): If using the S17 Pro EVO as a pre-amplifier, connect its XLR Balanced or RCA Unbalanced preamp outputs to your power ampliifier sau difuzoare active.
- Pornire: Flip the power switch on the rear panel to the 'ON' position. The front display will illuminate.
6. Instrucțiuni de utilizare
6.1. Controlul volumului
- Rotate the multi-function knob on the front panel clockwise to increase volume and counter-clockwise to decrease volume.
- The volume level is displayed on the 4-inch screen.
6.2. Selectare intrare
- Press the multi-function knob once to cycle through available inputs (RCA, XLR). The selected input will be shown on the display.
6.3. Gain Level Adjustment
- Long press the multi-function knob to switch between Low Gain (G-L) and High Gain (G-H) modes.
- Low Gain is suitable for sensitive IEMs, while High Gain provides more power for demanding headphones.
6.4. Quiescent Current Mode (Class-A)
Figure 4: Display showing 50mA (A-L) and 100mA (A-H) modes
- Double press the multi-function knob to switch between 50mA (A-L) and 100mA (A-H) quiescent current modes.
- The 100mA mode is a high current Class-A operation, offering a richer sound but may lead to a slower temperature rise.
- The display uses two colors to indicate the current level and temperature for easy monitoring.
6.5. Preamp/Headphone Dual Output Mode
The S17 Pro EVO allows independent selection between headphone amplifier output and preamp output. The current volume for each mode can be independently stored.
Figure 5: Output power for different loads and gain levels
6.6. Telecomanda
The S17 Pro EVO comes with an all-aluminum remote control for convenient operation of volume, input selection, and other functions from a distance.
7. Caracteristici tehnice
7.1. Twin JFET Technology
The S17 Pro EVO incorporates Twin JFETs, which offer high input impedance and a rich, tube-like sound. This design ensures consistent performance and stable mid-point voltage, making it an ideal input transistor for a headphone ampmai în viață.
Figure 6: Close-up of Twin JFET circuitry
7.2. Powerful Output Stage
Ieșirea finală stage utilizes two pairs of output transistors in parallel per channel, resulting in a total of 16 output transistors. This configuration allows for a maximum output of 7.5W, enabling the S17 Pro EVO to drive a wide variety of headphones and IEMs with ease.
Figure 7: Output stage with multiple transistors
7.3. R2R Electronic Volume Control
The S17 Pro EVO employs an R2R electronic volume chip from JRC and dedicated op-amps to construct a 4-way balanced R2R volume control. This design ensures high control precision, excellent channel balance, a wide soundstage, and accurate audio positioning.
Figure 8: R2R electronic volume control chip
7.4. Advanced Cooling System
To maintain stable Class-A operation, which generates heat, aune's industrial designers developed a complex three-dimensional cooling structure. This system integrates a heat sink on the transistor, a heat plate at the bottom, and the chassis to form a comprehensive cooling solution. Heat is efficiently dissipated through rear plate heat emission holes, ensuring stable performance.
Figura 9: Intern view of the 3-dimensional cooler structure
7.5. High-Quality Power Supply
The S17 Pro EVO features a 50W low-ripple toroidal transformer and a dual-power design. Digital control and analog circuits are kept independent to prevent interference. Additionally, a 19200µF capacitor array contributes to the amplifier's powerful and rich-sounding performance.
Figure 10: Toroidal transformer and capacitor array
7.6. Rigorous Component Selection
High-quality components are carefully selected for the S17 Pro EVO, including Hi-Fi electrolytic capacitors, ceramic capacitors, organic thin-film capacitors, and communication-grade PCBs, all contributing to superior sound quality.
Figura 11: Examples of high-quality internal components
7.7. Măsurători ale performanței
Figure 12: Performance graphs demonstrating low distortion and noise
8. Întreținere
- curatenie: Folosiți o lavetă moale și uscată pentru a curăța exteriorul dispozitivului. Nu utilizați agenți de curățare lichizi sau solvenți.
- Ventilare: Ensure that the ventilation holes are not obstructed.
- Depozitare: Când nu este utilizat pentru perioade lungi de timp, deconectați cablul de alimentare și depozitați dispozitivul într-un loc răcoros și uscat.
- Temperatură: The device operates in Class-A mode and will generate heat. This is normal. If the device temperature reaches 69°C, the S17 Pro EVO will automatically switch to 50mA Class-A current mode for overheat protection.
9. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Fără ieșire de sunet | Power not connected; incorrect input selected; headphones not plugged in correctly; volume too low. | Check power connection; select correct input; ensure headphones are fully plugged in; increase volume. |
| Sunet distorsionat | Input signal too high; faulty cable; incompatible headphones. | Reduce input signal level; try a different cable; ensure headphones are within impedance range. |
| Dispozitivul se simte fierbinte | Normal operation for Class-A amplifier; poor ventilation. | Ensure adequate ventilation. The device has overheat protection and will adjust current if necessary. |
| Telecomanda nu funcționează | Batteries depleted; obstruction between remote and device. | Replace batteries; ensure clear line of sight. |
10. Specificații
- Model: S17 Pro EVO
- Marca: Aune
- Greutatea articolului: 10.38 lire sterline
- Dimensiuni produs: 14 x 11 x 2.76 inci
- Putere de ieșiretage: 7.5 wați
- Dispozitive compatibile: Headphones, IEMs
- Tip conector: 4.4mm Jack, 6.35mm Jack, RCA, XLR
- Sursa de alimentare: Adaptor CA (110V)
11. Videoclipuri oficiale ale produselor
Watch the official product video for a visual guide to the Aune S17 Pro Headphone Amp.
Video 1: Aune S17 Pro Headphone Amp Pesteview
12. Garanție și asistență
Aune products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Aune webPăstrați dovada achiziției pentru reclamații în garanție.