Produs terminatview
This manual provides essential information for the installation, operation, and maintenance of the Generic Honda CB190R Motorcycle Rear Wheel. This component is designed for specific Honda CB190R models manufactured between 2020 and 2024, with part number 42650-k70-630ZA. It is crucial to ensure compatibility with your motorcycle model year before proceeding with installation.
Figure 1: Orange Honda CB190R Motorcycle Rear Wheel. This image displays the complete rear wheel assembly, highlighting its orange finish and spoke design, ready for installation.
Informații de siguranță
Always prioritize safety when working with motorcycle components. Read all instructions thoroughly before beginning any procedure. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves. If you are unsure about any step, consult a qualified motorcycle mechanic.
- Ensure the motorcycle is stable and securely supported before removing or installing the wheel.
- Use only appropriate tools for all procedures.
- Do not overtighten or undertighten fasteners; refer to torque specifications.
- Țineți copiii și animalele de companie departe de zona de lucru.
Configurare și instalare
Proper installation is critical for safe operation. This section outlines the general steps for replacing the rear wheel. Refer to your motorcycle's official service manual for specific torque values and detailed procedures.
Instrumente necesare:
- Suport sau elevator pentru motocicletă
- Set chei cu soclu
- Cheie dinamometrică
- Axle nut wrench
- Chain adjustment tools (if applicable)
- Unsoare
Pașii de instalare:
- Pregătiți motocicleta: Place the motorcycle on a stable stand, ensuring the rear wheel is off the ground.
- Scoateți roata veche:
- Loosen the axle nut.
- Remove any chain adjusters or brake caliper mounts as necessary.
- Slide the axle out.
- Carefully remove the old wheel, noting the position of spacers and chain.
- Inspectați componentele: Before installing the new wheel, inspect the brake rotor, sprocket, and wheel bearings for any damage or wear. Replace components as needed.
- Instalați noua roată:
- Apply a thin layer of grease to the axle.
- Carefully position the new wheel, ensuring the brake rotor aligns with the caliper and the sprocket aligns with the chain.
- Insert the axle through the swingarm and wheel.
- Reinstall any spacers, chain adjusters, and brake caliper mounts.
- Tighten Axle Nut: Hand-tighten the axle nut, then use a torque wrench to tighten it to the manufacturer's specified torque value. Refer to your Honda CB190R service manual for the exact specification.
- Reglarea tensiunii lanțului: Adjust the chain tension according to your motorcycle's specifications.
- Check Brake Function: Pump the rear brake lever several times to ensure proper brake function before riding.
Figura 2: Spate view of the orange motorcycle wheel, showing the sprocket mounting area and brake rotor attachment points. This perspective is useful for understanding component alignment during installation.
Considerații de exploatare
Once installed, the rear wheel operates as an integral part of your motorcycle's drivetrain and suspension system. No specific "operating" instructions are required for the wheel itself beyond ensuring proper installation and regular maintenance.
- Always ensure tire pressure is maintained at the manufacturer's recommended levels.
- Regularly check for any unusual noises or vibrations from the rear wheel area.
- Avoid riding with damaged or improperly installed wheels.
Întreţinere
Regular maintenance extends the life of your rear wheel and ensures safe riding.
Verificări de rutină:
- Presiunea anvelopelor: Verificați presiunea în anvelope înainte de fiecare plimbare.
- Rulmenți roți: Periodically check for play in the wheel bearings. Lift the rear wheel off the ground and try to move it side-to-side. Any significant play indicates worn bearings that require replacement.
- Spokes/Rim: Inspect the rim for dents or cracks and spokes (if applicable) for looseness or damage.
- Brake Rotor: Check the brake rotor for excessive wear, warping, or cracks.
- Pinion: Inspect the rear sprocket for worn or hooked teeth.
- Curăţenie: Keep the wheel clean to prevent dirt and grime buildup, which can hide damage or accelerate wear.
Instructiuni de curatare:
Clean the wheel using mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the finish. Rinse thoroughly and dry with a soft cloth.
Depanare
This section addresses common issues related to the rear wheel.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Excessive wheel wobble or vibration |
|
|
| Squealing or grinding noise from wheel area |
|
|
| Difficulty with chain alignment |
|
|
If troubleshooting steps do not resolve the issue, consult a certified motorcycle mechanic.
Specificații
| Atribut | Detaliu |
|---|---|
| Tip de produs | Motorcycle Rear Wheel |
| Marca | Generic |
| Compatibilitate model | Honda CB190R (2020-2024) |
| Numărul piesei | 42650-k70-630ZA |
| Culoare | Portocale |
| Finisaj exterior | Prelucrat |
| Țara de origine | China |
Garanție și suport
Specific warranty information for this product is not provided in the available data. Please refer to the seller's return policy or contact the seller directly for details regarding warranty coverage and support.
For technical assistance or further inquiries, it is recommended to contact the seller, JXLshop, or a qualified motorcycle service center.
- Vânzător: JXLshop
