VEVOR 170D
VEVOR Gas Pressure Washer 170D User Manual
Model: 170D
1. Introducere
Thank you for choosing the VEVOR Gas Pressure Washer Model 170D. This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your pressure washer. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.
This gas-powered pressure washer is designed for various cleaning tasks, offering a maximum pressure of 3400 PSI (239.04 kgf/cm²) and a flow rate of 10 L/min. It is suitable for cleaning vehicles, fences, patios, driveways, and other outdoor surfaces.

Figure 1.1: VEVOR Gas Pressure Washer 170D in use, demonstrating its powerful water spray for effective cleaning.
2. Informații de siguranță
Always observe basic safety precautions when using this product to reduce the risk of injury or damage. Failure to follow these instructions may result in serious injury or property damage.
2.1 Avertismente generale de siguranță
- Citește întregul manual: Understand all operating instructions and warnings before use.
- Purtați echipament de protecție adecvat: Always wear eye protection (safety glasses or goggles), hearing protection, and protective clothing.
- Țineți copiii și animalele de companie departe: Nu permiteți copiilor sau persoanelor neinstruite să utilizeze aparatul de spălat cu presiune.
- Operate in a well-ventilated area: The engine produces carbon monoxide, which is a colorless, odorless, and poisonous gas.
- Fuel handling: Handle gasoline with extreme care. Store fuel in approved containers and never refuel a hot or running engine.
- High-pressure spray: Never direct the spray at people, animals, electrical devices, or the unit itself. The high pressure can cause severe injury.
- Suprafata stabila: Folosiți mașina de spălat cu presiune pe o suprafață stabilă și plană pentru a preveni răsturnarea.
- Verificați dacă există daune: Before each use, inspect the unit, hoses, and nozzles for any damage. Do not operate if damaged.
3. Conținutul pachetului
Verify that all items listed below are included in your package. If any parts are missing or damaged, contact VEVOR customer service.
- Gas Pressure Washer Unit (main body with engine and pump)
- Furtun de înaltă presiune (8 m)
- Pistol de pulverizare
- Baghetă
- Quick-Connect Nozzles (5 types: 0°, 15°, 25°, 40°, Soap Nozzle)
- Roți (2)
- Asamblarea mânerului
- 8-10 Wrench (1)
- Șurubelniță Phillips (1)
- Spark Plug Socket and Socket Bar (1)

Figura 3.1: Pesteview of the VEVOR Gas Pressure Washer 170D and its included accessories.
4. Configurare și asamblare
Urmați acești pași pentru a asambla și pregăti mașina de spălat cu presiune pentru prima utilizare.
4.1 Asamblare
- Atașați roțile: Securely attach the two wheels to the main frame using the provided hardware.
- Instalați mânerul: Slide the handle assembly into the designated slots on the main unit and secure it with the locking pins or bolts.
- Conectați furtunul de înaltă presiune: Connect one end of the high-pressure hose to the pump outlet on the pressure washer and the other end to the spray gun. Ensure connections are tight.
- Atașați bagheta: Conectați lancea de pulverizare la pistolul de pulverizare.
4.2 Combustibil și ulei
The engine is shipped without oil or fuel. You must add both before starting the unit.
- Adăugați ulei de motor: Remove the oil fill cap/dipstick. Add the recommended engine oil (refer to engine manual for type and capacity) until it reaches the full mark on the dipstick. Do not overfill.
- Adăugați benzină: Umpleți rezervorul de combustibil cu benzină proaspătă, fără plumb (minim 87 octani). Nu umpleți excesiv. Lăsați spațiu pentru expansiunea combustibilului.
4.3 Conexiune la apă
- Connect a garden hose (minimum 5/8 inch diameter) to the water inlet on the pressure washer.
- Ensure the garden hose is free of kinks and has a steady water supply.
- Porniți complet alimentarea cu apă.
- Squeeze the trigger on the spray gun to purge air from the pump and hose until a steady stream of water emerges. This prevents damage to the pump.

Figura 4.1: Detaliat view of the 210cc 4-stroke engine and axial cam pump, highlighting key components for setup.
5. Instrucțiuni de utilizare
Urmați acești pași pentru o funcționare sigură și eficientă a aparatului de spălat cu presiune.
5.1 Pornirea motorului
- Ensure the water supply is fully on and all air is purged from the system.
- Rotiți comutatorul motorului în poziția „ON”.
- Move the choke lever to the "CHOKE" position (cold engine).
- Mutați robinetul de combustibil în poziția „ON”.
- Trageți ferm de mânerul demarorului cu recul până când motorul pornește.
- După ce motorul pornește, mutați treptat maneta de șoc în poziția „RUN” (funcționare).
5.2 Utilizarea duzelor
The pressure washer comes with 5 quick-connect nozzles for various applications.
- 0° Red Nozzle: Concentrated, high-impact jet for tough stains and hard-to-reach areas. Use with extreme caution.
- 15° Yellow Nozzle: Narrow spray for intensive cleaning of small areas.
- 25° Green Nozzle: Spray mediu pentru curățarea generală a majorității suprafețelor.
- Duză albă 40°: Spray amplu pentru curățarea delicată a suprafețelor.
- Black Soap Nozzle: Pulverizare cu presiune joasă pentru aplicarea detergentului.
To change nozzles, pull back the collar on the quick-connect fitting at the end of the wand, insert the desired nozzle, and release the collar. Ensure the nozzle is securely seated before operating.

Figure 5.1: The five quick-connect nozzles and their corresponding spray angles and applications.
5.3 Aplicarea detergentului
- Fill the detergent tank with pressure washer safe detergent.
- Attach the black soap nozzle to the spray wand.
- Start the engine and squeeze the trigger. The detergent will be drawn from the tank and mixed with the water at low pressure.
- După aplicarea detergentului, comutați la o duză de înaltă presiune (de exemplu, 25° sau 15°) pentru a clăti bine suprafața.
5.4 Închidere
- Opriți comutatorul motorului.
- Închideți supapa de combustibil.
- Opriți alimentarea cu apă.
- Apăsați trăgaciul pistolului de pulverizare pentru a elibera orice presiune rămasă în sistem.
- Deconectați furtunul de grădină și furtunul de înaltă presiune.

Figure 5.2: The extended reach provided by the 26 ft (8 m) high-pressure hose, allowing for versatile cleaning applications.
6. Întreținere
Regular maintenance ensures optimal performance and extends the life of your pressure washer. Always disconnect the spark plug wire before performing any maintenance.
6.1 Întreținerea motorului
- Verificați uleiul de motor: Verificați nivelul uleiului înainte de fiecare utilizare. Schimbați uleiul după primele 5 ore de funcționare, apoi la fiecare 50 de ore sau anual.
- Filtru de aer curat: Inspect the air filter every 25 hours or more often in dusty conditions. Clean or replace as needed.
- Verificați bujia: Verificați bujia anual sau la fiecare 100 de ore. Curățați-o sau înlocuiți-o dacă este necesar.
6.2 Întreținerea pompei
- Filtru de admisie a apei curate: Regularly check and clean the screen filter on the water inlet to prevent debris from entering the pump.
- winterization: If storing the pressure washer in freezing temperatures, use a pump protector or RV antifreeze to prevent damage to the pump.
6.3 Hose and Nozzle Maintenance
- Inspectați furtunurile: Regularly check the high-pressure hose and garden hose for cuts, leaks, or damage. Replace if necessary.
- Curățați duzele: If a nozzle becomes clogged, use the included nozzle cleaning tool to clear any obstructions.
7. Depanare
Această secțiune oferă soluții pentru problemele comune pe care le-ați putea întâmpina.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Motorul nu va porni | Fara combustibil Întrerupător motor OPRIT Șocul nu este setat corect Problemă cu bujia | Adăugați combustibil proaspăt Rotiți comutatorul motorului în poziția ON Reglați maneta de șoc Verificați/curățați/înlocuiți bujia |
| Presiune scăzută a apei | Alimentare insuficientă cu apă Duza înfundată Aer în pompă Pompă deteriorată | Ensure full water supply Curățați duza Purge air from pump Contactați centrul de service |
| Motorul merge greu | Combustibil învechit Filtru de aer înfundat Problemă cu bujia | Goliți și reumpleți cu combustibil proaspăt Curățați/înlocuiți filtrul de aer Verificați/curățați/înlocuiți bujia |
| Scurgerile de apă din pompă | Fitinguri libere Sigilii deteriorate | Strângeți toate conexiunile Contactați centrul de service |
8. Specificații
Technical specifications for the VEVOR Gas Pressure Washer Model 170D.
- Marca: VEVOR
- Model: 170D
- Sursa de alimentare: Funcționează pe benzină
- Motor: 210cc 4-stroke, 7 HP
- Presiune maxima: 3400 PSI (239.04 kgf/cm²)
- Debit maxim: 10 l/min
- Lungimea furtunului de înaltă presiune: 26 ft (8 m)
- Duze: 5 Quick-Connect (0°, 15°, 25°, 40°, Soap Nozzle)
- Dimensiuni produs (L x l x H): 52.5 x 72 x 87 cm (20.67 x 28.35 x 34.25 țoli)
- Greutatea articolului: 58.03 lbs (26.32 kg)
- UPC: 197988808220

Figure 8.1: Dimensional drawing and key specifications of the VEVOR Gas Pressure Washer 170D.
9. Garanție și asistență
Pentru informații despre garanție, asistență tehnică sau pentru a comanda piese de schimb, vă rugăm să contactați serviciul clienți VEVOR. Păstrați la îndemână bonul fiscal și numărul modelului produsului pentru un service mai rapid.
De obicei, puteți găsi informații de contact pentru asistență pe site-ul oficial VEVOR. website-ul web sau prin intermediul distribuitorului dumneavoastră.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.