1. Produs terminatview
Caracteristici cheie
- 6000A Jump Starter: Capable of reliably jump-starting 12V vehicles (all gasoline engines and up to 12.0L diesel engines) in seconds, even in temperatures ranging from -20°C to 60°C. Provides up to 70 jump starts on a single charge. Suitable for automobiles, trucks, motorcycles, boats, lawnmowers, yachts, pickups, and snowmobiles.
- 150PSI Portable Air Compressor: Designed for rapid inflation of all tires from 0 PSI to 150 PSI. Features dual-cylinder technology for a fast inflation rate of 50 LPM (1.76 CFM).
- Digital Pressure Gauge & Automatic Shut-off: Equipped with a real-time LED digital pressure gauge for accurate readings. Allows selection of preset modes (car, bicycle, motorcycle, ball) and automatically stops inflation once the desired PSI is reached.
- Baterie externă de 21800mAh: Functions as a power bank with Type-C input (5V/3A, 9V/2A) and dual USB outputs (5V/3A) to charge personal devices like cell phones and tablets. Recommended charging the jump starter with a 5V/2A adapter or higher.
- Design practic: Features a unique 3.4-inch large LCD screen displaying operational status, battery level, and potential errors. Includes a 600 lumens LED light with 3 modes (constant light, strobe, SOS) for outdoor activities or emergencies. An additional small light is integrated for illuminating the inflation operation area.
- Smart Jump Cables: Provides 8 types of protection, including protection against overheating, overcharge, over-discharge, over-voltage, short-circuit, reverse polarity, and anti-interference.
Conținutul pachetului
- 1 x ACEZUK M06 Jump Starter with Air Compressor
- 1 x Smart Jump Cable
- 1 x Air Pump Hose
- 4 x Gas Nozzles
- Cablu de încărcare 1 x USB-C
- 1 x Manual de utilizare
- 1 x Portable EVA Carrying Case

2. Informații de siguranță
Vă rugăm să citiți și să înțelegeți toate instrucțiunile de siguranță înainte de a utiliza acest produs. Nerespectarea acestor instrucțiuni poate duce la electrocutare, incendiu și/sau vătămări corporale grave.
- Do not operate the air pump continuously for extended periods. If the tire compressor becomes hot, allow it to cool down for several minutes before resuming inflation.
- Avoid over-inflating tires, as this can cause damage. If a tire is over-inflated, gently press the tire valve to release excess air.
- Always ensure correct polarity when connecting the jump cables to the vehicle battery terminals. Incorrect connection can cause sparks, damage the device, or harm the user.
- Nu lăsați dispozitivul și accesoriile acestuia la îndemâna copiilor.
- Do not attempt to disassemble, modify, or repair the device. This will void the warranty and may lead to hazards.
- Store the device in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
- Use only the provided smart jump cables and accessories with this device.
3. Configurare
Încărcarea dispozitivului
Before initial use, fully charge the ACEZUK M06. It is recommended to charge the device every 3-4 months to maintain optimal battery health, especially if not in regular use.
- Connect the provided USB-C charging cable to the device's Type-C input port.
- Connect the other end of the USB-C cable to a 5V/2A or higher USB power adapter (not included).
- The LCD screen will display the charging status and battery level. Charge until the battery indicator shows 100%.
Inspecția inițială
Upon receiving your ACEZUK M06, perform a quick inspection:
- Check the device and all accessories for any visible damage.
- Ensure all components listed in the 'Package Contents' section are present.
4. Instrucțiuni de utilizare
4.1 Pornirea cu sarcină a unui vehicul
Urmați acești pași pentru a porni vehiculul în siguranță:
- Asigurați-vă că contactul vehiculului este oprit și că frâna de mână este acționată.
- Insert the smart jump cable plug completely into the jump starter's designated port. The red and green lights on the clamp will flash alternately, indicating it's ready.
- Conectați cl. roșuamp la borna pozitivă (+) a bateriei vehiculului.
- Conectați cl. negruamp la borna negativă (-) a bateriei vehiculului.
- If the indicator light on the smart cable flashes red and green alternately, and the vehicle does not start, press and hold the forced start button on the smart cable for 3 seconds until the light turns solid green. This bypasses safety checks for severely discharged batteries.
- Start the vehicle's engine within 30 seconds of the indicator light turning solid green.
- Odată ce vehiculul pornește, scoateți imediat clema.amps from the battery terminals within 30 seconds. First, remove the black clamp, apoi clema roșieamp.


Video 1: Demonstration of how to force start a car using a jump starter.
Video 2: Step-by-step guide on how to jump start a car.
4.2 Utilizarea compresorului de aer
To inflate tires or other inflatables:
- Apăsați butonul ON/OFF pentru a porni dispozitivul.
- Briefly press the air pump button (usually indicated by a tire icon) to enter inflation mode. The screen will display the current pressure.
- Press the 'M' (Mode) button to cycle through and select the appropriate inflation mode (e.g., car, bicycle, motorcycle, ball).
- Use the '+' and '-' buttons to adjust the desired target air pressure. You can also change the unit of measurement (PSI, BAR, KPA) if available.
- Connect the air pump hose securely to the tire valve or the appropriate gas nozzle for other inflatables.
- Press and hold the air pump button for 3 seconds to begin inflation.
- Compresorul se va opri automat odată ce presiunea presetată este atinsă.
- Briefly press the air pump button again to exit inflation mode.


Video 3: Instructions on how to inflate a tire using the device.
4.3 Utilizarea ca baterie externă
The ACEZUK M06 can charge your electronic devices:
- Connect your mobile phone, tablet, or other USB-powered device to one of the dual USB output ports (5V/3A) on the jump starter.
- Dispozitivul va începe automat încărcarea dispozitivului conectat.

4.4 Utilizarea luminii LED
The integrated LED light provides illumination for various situations:
- Press the light button (usually indicated by a light bulb icon) to turn on the LED light.
- Press the button repeatedly to cycle through the 3 modes: constant light, strobe, and SOS signal.
- An additional small light is located on the bottom of the product to specifically illuminate the area around the tire valve during inflation.

5. Întreținere
Proper maintenance ensures the longevity and optimal performance of your ACEZUK M06:
- Depozitare: Store the device in its portable EVA carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
- Reîncărcare: If the device is not used regularly, recharge it every 3-4 months to prevent deep discharge and maintain battery health.
- curatenie: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals, solvents, or abrasive cleaners. Ensure all ports are free from dust and debris.
- Îngrijirea cablului: Inspect the smart jump cables and air pump hose regularly for any signs of wear or damage. Replace if necessary.
6. Depanare
If you encounter issues with your ACEZUK M06, refer to the table below for common problems and their solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Dispozitivul nu pornește. | Baterie descărcată sau fără încărcare. | Charge the device fully using the provided USB-C cable and a suitable adapter. |
| Vehiculul nu pornește. | Incorrect cable connection, severely discharged battery, or vehicle issue. | Asigurați clamps are connected correctly (red to +, black to -). Check if the smart cable indicator light is solid green. If not, use the forced start function. If the issue persists, the vehicle battery might be beyond jump-starting or there's another vehicle problem. |
| Compresorul de aer nu se umflă. | Hose not securely connected, incorrect pressure setting, or low device battery. | Verify the air pump hose is tightly connected to the tire valve. Ensure a target pressure is set. Check the device's battery level and recharge if necessary. |
| Air compressor overheats. | Continuous operation without cooling. | Stop the inflation process and allow the compressor to cool down for several minutes before resuming. Avoid prolonged continuous use. |
| Citire inexactă a presiunii. | Incorrect unit of measurement selected. | Press the 'U' (Unit) button to cycle through and select the correct pressure unit (PSI, BAR, KPA). |
7. Specificații
- Marca: ACEZUK
- Model: M06
- Curentul de vârf: 6000 Amperes
- Capacitate baterie: 21800 mAh (Litiu Ion)
- Tip service vehicul: Automotive (All Gas, up to 12.0L Diesel)
- Voltage: 12 volți
- Presiunea compresorului de aer: 0-150 PSI
- Debitul de aer: 50 LPM (1.76 CFM)
- Intrare de tip C: 5V/3A, 9V/2A
- Ieșiri USB: Dual 5V/3A
- Lumina LED: 600 Lumens (3 modes: Light/Strobe/SOS)
- Temperatura de functionare: -20°C până la 60°C
- Greutate produs: 1.57 kg
- Dimensiuni pachet: 21.1 x 17.3 x 14.4 cm
8. Garanție și asistență
ACEZUK is committed to providing high-quality products and excellent customer service.
- Garantie: This product comes with a 2-year FREE warranty from the date of purchase.
- Suport tehnic: Lifetime technical support is available for all ACEZUK M06 users.
- Serviciu clienți: Our customer service team is available 24/7 to assist you with any questions or concerns.
For warranty claims, technical assistance, or general inquiries, please refer to the contact information provided with your purchase or visit the official ACEZUK website pentru resurse de asistență.







