MOUNTUP Dual Monitor Arm MU8012-W-07 Instruction Manual

1. Introducere

Thank you for choosing the MOUNTUP Dual Monitor Arm MU8012-W-07. This instruction manual provides essential information for the safe and correct installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.

Măsuri de siguranță

• Asigurați-vă că toate componentele sunt prezente și nedeteriorate înainte de asamblare. Nu utilizați dacă lipsesc sau sunt defecte piesele.
• Verify that your desk surface is strong enough to support the combined weight of the monitor arm and your monitors.
• Do not exceed the maximum weight capacity of 10kg (22 lbs) per arm.
• Always follow the installation steps carefully. Improper installation may result in product damage or personal injury.
• Keep children away from the product during assembly. Small parts may be a choking hazard.

2. Conținutul pachetului

Vă rugăm să verificați dacă toate componentele următoare sunt incluse în pachet:

• Monitor Arm Assembly (x1)
• Placă VESA (x2)
• Birou Clamp Baza (x1)
• Grommet Base (x1)
• Mounting Hardware Kit (screws, washers, spacers)
• Hex Wrenches (various sizes)
• Manual de instrucțiuni (x1)

3. Specificații

4. Configurare și instalare

Pasul 1: Alegeți metoda de montare

The MOUNTUP Dual Monitor Arm supports two installation methods: Clamp Mount and Grommet Mount. Choose the method that best suits your desk.

Clamp Instalarea montajului

1. Atașați clamp base to the main pole of the monitor arm.
2. Așezați clamp onto the edge of your desk. Ensure the desk thickness is between 10-70mm (0.4-2.7 inches).
3. Strângeți clamp screw until the arm is securely fastened to the desk. Ensure it is stable and does not wobble.

Instalare montare cu ochiuri

1. If your desk has a grommet hole, ensure its diameter is between 10-60mm (0.4-2.4 inches) and the desk thickness is between 10-70mm (0.4-2.7 inches).
2. Attach the grommet base to the main pole.
3. Insert the grommet bolt through the desk hole and secure it from underneath with the provided plate and nut.
4. Tighten the nut until the arm is firmly attached to the desk.

Pasul 2: Atașați plăcile VESA la monitoare

1. Așezați cu grijă monitorul cu fața în jos pe o suprafață moale și curată.
2. Aliniați placa VESA cu orificiile de montare de pe spatele monitorului.
3. Use the appropriate screws (M4 or M5) and washers from the hardware kit to secure the VESA plate to the monitor. Do not overtighten.

Pasul 3: Montați monitoarele pe brațe

1. Slide the monitor (with the attached VESA plate) onto the VESA head of the monitor arm.
2. Ensure the monitor clicks into place or is securely fastened by the quick-release mechanism.
3. Repetați pentru al doilea monitor.

Pasul 4: Managementul cablurilor

Route your monitor cables through the integrated cable management clips on the underside of the arms. This helps maintain a tidy workspace.

5. Operare și reglaje

The MOUNTUP Dual Monitor Arm offers flexible adjustments to optimize your viewexperiență.

Adjusting Arm Tension (Gas Spring)

The gas spring mechanism allows for smooth height adjustments. If your monitor sags or is difficult to move, you may need to adjust the tension.

• To increase tension (if monitor sags): Use the provided hex wrench to turn the adjustment screw clockwise.
• To decrease tension (if arm is too stiff): Turn the adjustment screw counter-clockwise.
• Always adjust tension with the arm held horizontally. Test the movement after each small adjustment until the monitor holds its position freely.

Ajustări monitor

• Reglarea înălțimii: Gently push or pull the monitor up or down to your desired height. The gas spring will assist in holding the position. Max height is 44cm (17.3 inches).
• Reglarea înclinării: Tilt the monitor screen up to +85° or down to -45° to reduce glare and optimize viewing angles. Loosen the tilt bolt, adjust, then re-tighten.
• Ajustare pivotare: The arm allows for 180° swivel at the monitor plate, 270° at the middle joint, and 360° at the base, providing wide range of motion.
• Rotație (Pivot): Rotate your monitor 360° to switch between landscape and portrait orientations.

6. Întreținere

• curatenie: Ștergeți brațul monitorului cu o lavetă moale șiamp Evitați produsele de curățare abrazive sau solvenții care ar putea deteriora finisajul.
• Verificări periodice: Verificați periodic toate șuruburile și conexiunile pentru a vă asigura că rămân strânse și fixate. Strângeți-le din nou dacă este necesar.
• Gas Spring Longevity: The high-quality gas spring is tested for over 20,000 cycles. Proper tension adjustment will help maintain its performance over time.

7. Depanare

• Monitorul se lasă sau nu rămâne treaz: The gas spring tension is too low. Refer to the "Adjusting Arm Tension" section and turn the adjustment screw clockwise to increase tension.
• Arm is Too Stiff or Difficult to Move: The gas spring tension is too high. Refer to the "Adjusting Arm Tension" section and turn the adjustment screw counter-clockwise to decrease tension.
• Monitorul oscilează: Ensure all mounting screws (VESA plate to monitor, arm to desk) are securely tightened. Check that the desk clamp or grommet mount is firm.
• Monitor Tilt Angle Won't Hold: The tilt bolt may be loose. Tighten the tilt bolt on the VESA head.

8. Garanție și asistență

MOUNTUP provides a Garanție de calitate 2 ani de la data achiziționării acestui produs. Această garanție acoperă defectele de fabricație și problemele care apar în urma utilizării normale.

If you encounter any problems with your MOUNTUP Dual Monitor Arm, or if you have questions regarding installation or operation, please contact our customer support. You can typically find seller contact information through your purchase history on the platform where you bought the product (e.g., Amazon order details).

Please have your model number (MU8012-W-07) and purchase date ready when contacting support to ensure a swift resolution.