ANSIO 2 x 100 LED-uri cu micro-sârmă de cupru și USB cu telecomandă - Alb cald - Manual de utilizare

1. Introducere

Thank you for choosing the ANSIO 2 x 100 LED Micro Copper Wire USB Lights with Remote. This manual provides essential information for the safe and effective use of your new lighting product. Please read these instructions carefully before installation and operation, and retain them for future reference.

These lights feature 100 warm white LEDs on a flexible copper wire, powered via USB, and controlled by an included remote. They are designed for indoor decorative purposes, offering various lighting modes and a timer function.

Image: Two sets of ANSIO 2x100 LED Micro Copper Wire USB Lights, coiled, showcasing their compact form and warm white glow.

2. Informații de siguranță

• Numai pentru utilizare în interior: This product is designed for indoor use. Do not expose to water, moisture, or outdoor elements.
• Sursa de alimentare: Use only with a compatible USB power source (e.g., USB wall adapter, power bank, computer USB port) that provides 5V DC. Ensure the power source meets safety standards.
• Evitați supraîncălzirea: Do not cover the lights or power adapter during operation. Ensure adequate ventilation.
• Manipulați cu grijă: The copper wire is flexible but can be damaged if bent excessively or sharply. Avoid pulling or tugging on the wire.
• Copii și animale de companie: Keep the product out of reach of small children and pets to prevent entanglement or ingestion of small parts.
• Deteriora: Do not operate the lights if the wire, LEDs, or USB connector are damaged. Discontinue use immediately and contact customer support.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• 2 x 100 LED Micro Copper Wire USB Lights (Warm White)
• 1 x telecomandă
• 1 x Manual de utilizare (acest document)

4. Configurare

1. Despachetați luminile: Carefully remove the lights from their packaging. The copper wire is delicate; uncoil it gently to avoid tangling or damage.
2. Introduceți bateria la distanță: The remote control typically comes with a small plastic tab to prevent battery drain. Pull this tab out before first use. If the remote does not work, ensure the battery (CR2025 or similar, usually included) is correctly inserted with the positive (+) side facing up.
3. Poziționați luminile: Determine your desired display area. The flexible copper wire allows you to shape the lights around objects, along shelves, or within decorative arrangements. The lights feature a 1m clear lead wire and approximately 10m lit length per strand.
4. Conectare la alimentare: Plug the USB connector of the light strand into a compatible 5V USB power source. The lights should illuminate.

Imagine: Un prim-plan view of the ANSIO Micro Copper Wire LED Lights, highlighting the small, bright LEDs on the thin copper wire.

5. Instrucțiuni de utilizare

The ANSIO Micro Copper Wire USB Lights are controlled using the included remote. Ensure the remote is pointed towards the USB receiver for optimal functionality.

Image: ANSIO Micro Copper Wire LED Lights adorning a Christmas tree, with the remote control visible in the foreground, demonstrating its use.

Funcții de control de la distanță:

• ON/OFF: Apăsați pentru a aprinde sau stinge luminile.
• DIM+/DIM-: Reglați nivelul de luminozitate al luminilor.
• 1-8 (Mode Selection): Select from 8 different lighting modes. These typically include combinations like waves, sequential, slo-glo, chasing/flash, slow fade, twinkle/flash, and steady on. Experiment to find your preferred mode.
• TIMER: Activate the timer function. When pressed, the lights will stay on for 6 hours and then automatically turn off for 18 hours, repeating the cycle daily. To deactivate the timer, press the TIMER button again or turn the lights off and on manually.

6. Întreținere

• curatenie: Ensure the lights are unplugged from the power source before cleaning. Gently wipe the copper wire and LEDs with a soft, dry cloth. Do not use liquid cleaners or immerse any part of the product in water.
• Depozitare: When not in use, carefully coil the lights and store them in their original packaging or a suitable container to prevent tangling and damage. Store in a cool, dry place away from direct sunlight.

7. Depanare

Probleme comune și soluții:

• Luminile nu se aprind:
  • Ensure the USB connector is fully inserted into a working USB power source.
  • Încercați o altă sursă de alimentare USB sau un alt adaptor.
  • Check if the remote control battery is correctly inserted and has power. Remove and reinsert the plastic tab if present.
  • Îndreptați telecomanda direct spre receptorul USB.
• Telecomanda nu funcționează:
  • Replace the remote control battery (typically CR2025).
  • Asigurați-vă că nu există obstacole între telecomandă și receptorul USB.
  • Confirm the remote is pointed towards the USB receiver.
• Luminile pâlpâie sau se sting neașteptat:
  • Check the USB power source for stable output. A low-power USB port might cause issues.
  • Asigurați-vă că conexiunea USB este sigură.
  • If using the timer function, the lights will turn off after 6 hours.

If you experience persistent issues not covered here, please contact ANSIO customer support.

8. Specificații

9. Garanție și asistență

ANSIO products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the contact details provided with your purchase or visit the official ANSIO website-ul.

Vă rugăm să păstrați dovada achiziției pentru orice reclamații în garanție.