Introducere
Thank you for choosing the Vrabocry DC 5V/12V/24V 17 Key RF Wireless Remote LED Controller. This device is designed to provide versatile control over your 5050, 3528, and 5630 LED strip lights, offering a range of static colors and dynamic modes. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.
Informații de siguranță
- Asigurați-vă că volumul de intraretage (5V, 12V, or 24V) matches your LED strip lights and power supply. Incorrect voltage can damage the controller and LED strips.
- Do not expose the controller or remote to moisture or extreme temperatures.
- Deconectați alimentarea înainte de a efectua orice conexiune sau deconectare.
- Acest produs este destinat numai utilizării în interior.
- A nu se lăsa la îndemâna copiilor.
Conținutul pachetului
Pachetul include următoarele articole:
- 1 x RF Mini RGB Controller
- 1 x 17-Key RF Wireless Remote (CR2025 battery not included)
- 1 x Manual de utilizare
Înființat
1. Conectarea controlerului
- Connect your LED strip light to the 4-pin output connector of the RF Mini RGB Controller. Ensure the polarity is correct (usually indicated by arrows or markings).
- Connect a compatible DC 5V/12V/24V power supply to the input jack of the RF Mini RGB Controller.
- Verificați că toate conexiunile sunt sigure înainte de a aplica alimentarea.
Image: The Vrabocry RF Mini RGB Controller connected to its 17-key wireless remote. The controller has a white cable with a 4-pin connector for LED strips and a power input jack.
2. Instalarea bateriei telecomenzii
The 17-key RF Wireless Remote requires one CR2025 button battery (not included).
- Locate the battery tray on the back of the remote control.
- Gently push the small tab and pull out the battery tray.
- Introduceți o nouă baterie CR2025 cu partea pozitivă (+) în sus.
- Slide the battery tray back into the remote until it clicks into place.
Image: The back of the 17-key RF Wireless Remote, illustrating the battery compartment for a CR2025 battery. Instructions for opening and inserting the battery are visible.
Instrucțiuni de operare
The 17-key RF Wireless Remote allows for comprehensive control of your LED strip lights. The remote operates using a 433MHz wireless signal, providing control without direct line-of-sight.
Imagine: față view of the 17-key RF Wireless Remote Control, displaying all buttons and their labels for various functions.
Funcții de control de la distanță:
| Buton | Funcţie |
|---|---|
| PORNIT / STANDBY | Turns the LED lights on or switches to standby mode. |
| MODE+ / MODE- | Switches between 9 dynamic modes or transitions from static lighting to dynamic modes. |
| SPEED+ / SPEED- | Adjusts the speed of dynamic modes (5 levels). |
| BRIGHT+ / BRIGHT- | Adjusts the brightness of static colors or dynamic modes. |
| COLOR+ / COLOR- | Cycles through 20 static colors. Can also switch from dynamic mode to a static color. |
| SINGLE COLOR SELECT | Directly selects specific static colors: White, Red, Green, Blue, Yellow, Cyan, Pink. |
| DEMO | Activates a demonstration mode cycling through various dynamic effects. |
Moduri dinamice:
The controller offers 9 dynamic modes, including effects such as strobe, breathing, fading in and out, slow flashing, and flickering. Use the MOD+ şi MOD- buttons to cycle through these effects.
Culori statice:
There are 20 static colors available. Use the COLOR+ şi COLOR- buttons to select your desired color, or use the dedicated single color buttons for quick access to primary colors.
Întreţinere
- curatenie: Use a soft, dry cloth to clean the controller and remote. Do not use liquid cleaners or solvents.
- Înlocuire baterie: Replace the CR2025 battery in the remote control when its range decreases or it stops responding. Refer to the "Remote Control Battery Installation" section for instructions.
- Depozitare: Depozitați dispozitivul într-un loc răcoros și uscat atunci când nu îl utilizați pentru perioade lungi de timp.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| LED strip lights do not turn on. | Nu există alimentare cu energie electrică la controler. Conexiuni incorecte. Bateria telecomenzii este descărcată. | Verificați conexiunea la sursa de alimentare. Verify LED strip and power supply connections are secure and correct polarity. Înlocuiți bateria telecomenzii. |
| Telecomanda nu răspunde. | Baterie descărcată sau instalată incorect. Remote is too far from the controller. | Replace CR2025 battery, ensuring correct polarity. Move closer to the controller. The RF signal has a typical range, but obstacles can reduce it. |
| Culorile LED-urilor sunt incorecte sau pâlpâie. | Conexiune slabă. Incompatible LED strip type. | Check all 4-pin connections for the LED strip. Ensure your LED strip is a common anode RGB type compatible with this controller. |
Specificații
- Voltage: 5V - 24V CC
- Curent de lucru: 12A / 3 channels (4A per channel)
- Temperatura de lucru: -20°C până la 60°C (-4°F până la 140°F)
- Dimensiuni controler: Aproximativ 1.6 x 0.5 x 0.2 inchi (40 x 12.7 x 5 mm)
- Control RGB: 3 output channels, common anode+
- Culori statice: 20
- Moduri dinamice: 9
- Niveluri de viteza: 5
- Metoda de control: 433MHz RF Wireless
- Tip baterie telecomandă: CR2025 (nu este inclus)
Garanție și suport
Vrabocry products are designed for reliability and performance. For warranty information or technical support, please refer to the retailer where you purchased this product or visit the official Vrabocry website. Vă rugăm să păstrați dovada achiziției pentru reclamații în garanție.
If you encounter any issues not covered in this manual, please contact customer support for assistance.