Introducere
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Faber 60 cm 1500 m³/hr Autoclean Kitchen Chimney, model HOOD DAZZLE BLDC FL HC BK 60. Please read these instructions carefully before using the appliance and retain them for future reference.
Imagine: Înclinat frontal view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showcasindesignul său general.
Instrucțiuni importante de siguranță
- Asigurați-vă că instalarea coșului de fum este efectuată de un tehnician calificat, în conformitate cu reglementările locale.
- Do not operate the chimney if the power cord is damaged. Contact authorized service personnel for repairs.
- Mențineți o ventilație adecvată în încăpere atunci când coșul de fum este în funcțiune, mai ales dacă sunt prezente și alte aparate care funcționează cu combustibil.
- Clean the chimney regularly to prevent grease buildup, which can be a fire hazard.
- Nu flambați sub coș.
- Nu lăsați copiii la îndemâna aparatului în timpul funcționării și curățării.
- Deconectați sursa de alimentare înainte de orice operațiune de curățare sau întreținere.
Configurare și instalare
The Faber HOOD DAZZLE BLDC FL HC BK 60 is a wall-mounted kitchen chimney. Proper installation is crucial for optimal performance and safety.
Despachetare și componente
Carefully unpack the chimney and check for any damage. The package should contain:
- 1 x Faber Kitchen Chimney unit
- 1 x Manual de utilizare
- Installation hardware (screws, wall plugs, etc. - typically included)
Montare
This chimney is designed for wall-mounted installation. Ensure the wall is strong enough to support the appliance's weight (approximately 18 kg). The recommended mounting height above the cooking surface should be followed as per local safety standards and the chimney's specifications to ensure effective suction and safety.
Imagine: față view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showcasing designul său elegant de culoare neagră și panoul de control.
Image: Side angled view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showing its profile and exhaust duct cover.
Imagine: Jos view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showing the filterless intake area.
Conexiune electrica
The chimney operates on 230 Volts. Ensure the electrical outlet is properly grounded and meets the required specifications. It is recommended to have a dedicated circuit for the appliance.
Instrucțiuni de operare
Your Faber chimney features advanced controls for ease of use, including touch, gesture, and remote control options.
Panou de control terminatview
The control panel is located on the front of the chimney. It includes touch-sensitive buttons for various functions and an LED display.
Imagine: Înclinată view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, highlighting the touch and gesture control panel.
Image: Close-up of the control panel on the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showing power, light, and speed settings.
Funcții
- Pornire/Oprire: Use the dedicated power button on the control panel or remote.
- Suction Speed Adjustment: Adjust the suction power up to 1500 m³/hr using touch controls, gestures, or the remote. Higher speeds are recommended for heavy cooking.
- Iluminare cu LED: The chimney is equipped with LED lights to illuminate your cooking area. Activate them via the control panel or remote.
- Curățare automată cu căldură: This feature automatically cleans the internal components by heating and melting grease, which then collects in an oil collector. Refer to the Maintenance section for details.
Telecomanda
The included remote control allows for convenient operation from a distance. It typically includes buttons for power, light, and suction speed adjustment.
Image: A hand holding the remote control for the Faber chimney, demonstrating its use for simplified cooking.
Image: Illustration of gesture control functionality for the Faber chimney, showing hands interacting with the sensor area.
Întreținere și curățare
Regular maintenance ensures the longevity and optimal performance of your Faber chimney. Always disconnect the power supply before cleaning.
Heat Auto Clean Function
The Heat Auto Clean feature is designed to simplify internal cleaning. When activated, a heating element melts accumulated grease, which then flows into a removable oil collector. It is recommended to run the auto-clean cycle periodically, depending on your cooking frequency.
- To activate, press the dedicated Auto Clean button on the control panel or remote.
- The cycle duration may vary. Do not interrupt the process.
- After the cycle, carefully remove and empty the oil collector. Clean it with warm soapy water.
Image: Illustration depicting the auto-clean technology of the Faber chimney, showing grease being collected in the oil collector.
Curatenie exterioara
Ștergeți suprafețele exterioare ale coșului de fum cu o cârpă moaleampened with mild detergent. Avoid abrasive cleaners or scouring pads, as they can damage the matte black finish.
Tehnologie fără filtru
This chimney utilizes filterless technology, reducing the need for frequent filter cleaning or replacement. The internal design and auto-clean function manage grease collection efficiently.
Ghid de depanare
Înainte de a contacta serviciul clienți, vă rugăm să consultați următoarele probleme și soluții frecvente:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Coșul de fum nu se aprinde. | No power supply; loose connection; power outage. | Check power cord connection. Verify power outlet functionality. Check household circuit breaker. |
| Putere de aspirare redusă. | Oil collector full; obstruction in ducting; incorrect speed setting. | Empty and clean the oil collector. Ensure ducting is clear. Increase suction speed. |
| Zgomot neobișnuit în timpul funcționării. | Loose components; foreign object in fan; motor issue. | Ensure all parts are securely fastened. If noise persists, contact service. |
| Auto Clean function not working. | Power issue; sensor malfunction. | Ensure power supply is stable. If issue persists, contact service. |
Dacă problema persistă după încercarea acestor soluții, vă rugăm să contactați serviciul de asistență pentru clienți Faber.
Specificațiile produsului
| Numele modelului | HOOD DAZZLE BLDC FL HC BK 60 |
| Marca | Faber |
| Tip de montare | Montat pe perete |
| Lăţime | 60 cm |
| Puterea de aspirare | 1500 m³/h (metri cubi pe oră) |
| Tip filtru | Fără filtru |
| Tipul funcției | Heat Auto Clean |
| Termina | Negru Mat |
| Controale | Touch & Gesture with Remote control |
| Dimensiunile produsului (lxlxh) | 59.7 x 45.5 x 51.2 cm (597x455x512 MM) |
| Voltage | 230 volți |
| Greutatea articolului | 18 kilograme |
| Nivel de zgomot | 56 de decibeli |
| Tip sursă de lumină | LED |
| Consumul anual de energie | 180 kilowați |
| Producător | Franke Faber India Pvt Ltd |
Informații despre garanție
Your Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney comes with a comprehensive warranty:
- Garanția produsului: 5 ani
- Garanția motorului: 12 ani
Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects under normal use conditions. For detailed terms and conditions, refer to the warranty card included with your product or contact Faber customer service.
Asistență pentru clienți
For any queries, technical assistance, or service requests regarding your Faber kitchen chimney, please contact Faber customer support. You can find contact details on the Faber official website-ul sau cardul dumneavoastră de garanție.
Manufacturer: Franke Faber India Pvt Ltd