Septpenta Digital LED Alarm Clock User Manual

Introducere

This manual provides comprehensive instructions for the Septpenta Digital LED Alarm Clock, Model Septpentags0vwo6feg-12. This device features a large LED display, adjustable brightness, dual alarms, and displays time, temperature, date, and day simultaneously. It supports both 12-hour and 24-hour time formats, as well as Celsius and Fahrenheit temperature readings. The clock can be powered via USB or battery, and includes a power failure memory function to retain settings.

Conținutul pachetului

• 1 x Septpenta Digital LED Alarm Clock
• 1 x cablu USB
• 1 x Manual de utilizare
• Note: 1 x CR20 button cell battery (for memory function) is not included.

Produs terminatview

Figura 1: Față View of the Digital LED Alarm Clock. This image shows the large LED display, which simultaneously presents the time, temperature, date, and day of the week. The display offers 4 levels of brightness and features a power failure memory function.

Figure 2: Timing Function Overview. The clock supports 12/24-hour time format switching and features dual alarms, making it suitable for various settings like bedrooms or offices.

Figure 3: Temperature, Day, and Date Display. The clock provides a clear display of temperature, day, and date, operating quietly to ensure undisturbed sleep.

Figure 4: Rear Control Buttons. This image displays the 'DOWN', 'UP', and 'SET' buttons located on the back of the alarm clock, used for configuration.

Figure 5: Time Memory Compartment. Un detaliat view of the back, indicating the compartment for the CR20 button cell battery, which provides power failure memory functionality.

Figure 6: Clock with USB Cable. The alarm clock is shown alongside its USB power cable, which is used for primary power supply.

Figura 7: Dimensiunile produsului. This image illustrates the compact size of the alarm clock, measuring approximately 11 cm in length and 4 cm in height.

Înființat

1. Conexiune la alimentare

1. Connect the provided USB cable to the power input port on the back of the alarm clock.
2. Conectați celălalt capăt al cablului USB la un adaptor de alimentare USB standard (nu este inclus) sau la un port USB alimentat.
3. The LED display will light up, indicating the clock is powered on.

2. Installing Memory Battery (Optional)

• To enable the power failure memory function, insert one CR20 button cell battery (not included) into the battery compartment on the back of the clock (refer to Figure 5).
• Asigurați-vă că bateria este introdusă cu polaritatea corectă.
• This battery will preserve time and alarm settings during a power outage, but will not power the main display.

Instrucțiuni de operare

1. Setarea orei

1. Țineți apăsat butonul SET button for approximately 3 seconds to enter time setting mode. The hour digits will flash.
2. Utilizați UP şi JOS butoane pentru a regla ora.
3. Apăsați tasta SET Apăsați din nou butonul pentru a confirma ora și a trece la setarea minutelor. Cifrele minutelor vor clipi.
4. Utilizați UP şi JOS butoane pentru reglarea minutelor.
5. Apăsați tasta SET button once more to confirm the minutes and exit time setting mode.

2. Setarea alarmelor (alarme duale)

This clock supports two independent alarms (AL1 and AL2).

1. Apăsați tasta SET button once to cycle through display modes until "AL1" appears.
2. Țineți apăsat butonul SET button for 3 seconds when "AL1" is displayed. The alarm hour digits will flash.
3. Utilizați UP şi JOS butoane pentru a seta ora dorită a alarmei.
4. Presa SET to confirm the hour and move to minute setting. The alarm minute digits will flash.
5. Utilizați UP şi JOS butoane pentru a seta minutele dorite ale alarmei.
6. Presa SET to confirm the minutes. The alarm icon for AL1 will appear on the display, indicating it is active.
7. Repeat steps 1-6 for "AL2" to set the second alarm.
8. Pentru a dezactiva o alarmă, apăsați butonul SET button to display the alarm (AL1 or AL2), then press the JOS button to toggle it off. The alarm icon will disappear.

3. Funcția de amânare

• When an alarm sounds, press any button (except SET) to activate the snooze function. The alarm will pause and sound again after a few minutes (default snooze time is typically 5-9 minutes, refer to specific product manual for exact duration if available).
• To stop the alarm completely, press the SET button when the alarm is sounding.

4. Reglarea luminozității

• În modul normal de afișare a orei, apăsați tasta UP button to cycle through the 4 available brightness levels.

5. 12/24 Hour Format and Celsius/Fahrenheit Toggle

• În modul normal de afișare a orei, apăsați tasta JOS button to switch between 12-hour and 24-hour time formats.
• When the temperature is displayed, press and hold the JOS button to toggle between Celsius (°C) and Fahrenheit (°F).

6. Date and Day Display

• The clock automatically displays the date and day of the week alongside the time and temperature. No manual setting is typically required for the day once the date is set.
• To set the date, enter time setting mode (hold SET), then after setting minutes, press SET again to cycle through year, month, and day settings. Use UP şi JOS pentru ajustarea valorilor.

Întreţinere

• curatenie: Ștergeți ceasul cu o cârpă moale și uscată. Nu folosiți produse de curățare abrazive sau solvenți.
• Înlocuire baterie: If the power failure memory function is not working, replace the CR20 button cell battery in the compartment on the back of the clock.
• Depozitare: If storing the clock for an extended period, disconnect the USB power and remove the memory battery.

Depanare

Specificații

Garanție și suport

For any questions, technical support, or warranty inquiries regarding your Septpenta Digital LED Alarm Clock, please refer to the contact information provided with your purchase or visit the official Septpenta website. Vă rugăm să păstrați dovada achiziției pentru reclamații în garanție.