1. Introducere
The YOJOCK Natural Gas Leak Detector HT60 is a portable device designed to detect various combustible gases, ensuring safety in your home, RV, or other environments. This manual provides essential information for proper setup, operation, maintenance, and troubleshooting to help you use your device effectively and safely.
Image 1: YOJOCK Natural Gas Leak Detector HT60. A red and black pen-shaped device with an LCD screen and two buttons, shown alongside two AAA batteries.
2. Caracteristici
- Multi-Gas Leak Detection: Utilizes high-precision semiconductor sensors to detect natural gas, coal gas, propane, methane, butane, and liquefied petroleum gas (LPG).
- Alarmă sonoră și vizuală: Responds in as little as 0.5 seconds with a 75dB alarm and a visual bar graph. The LCD screen turns red at high gas concentrations.
- Portabil și compact: Sized at 6.7 × 0.9 × 1.1 inches and weighing 0.12 lbs, featuring a pocket clip for easy transport.
- Configurare rapidă și ușoară: Requires two AAA batteries (included). Features a 30-second warm-up time and selectable high/low sensitivity modes.
- Oprire automată: Device automatically powers off after 5 minutes of inactivity to conserve battery life.
- Indicator baterie descărcată: Alerts you when battery replacement is needed.
Image 2: Diagram illustrating the detector's high-precision sensors and its ability to detect over 10 types of gases, including Propane, Coal Gas, Natural Gas, Ethane, Gasoline, and Methane.
3. Configurare
- Introduceți bateriile: Open the battery compartment and insert the two included AAA batteries, ensuring correct polarity.
- Pornire: Press and hold the power button (red button) until the LCD screen illuminates.
- Încălzire: The device will undergo a 30-second warm-up period. During this time, the bar graph on the LCD will cycle, and you will hear a tone. Wait until the tone stops and the bar graph stabilizes before proceeding.
- Selectați Sensibilitatea: Press the 'S' button (green button) to toggle between high and low sensitivity modes. The display will indicate the selected mode.
Image 3: Visual guide showing the four easy steps for setting up and starting the gas leak detector: Turn On, Wait for Warm-up, Select Testing Mode, and Start Testing.
4. Instrucțiuni de utilizare
Once the device has completed its warm-up and you have selected the desired sensitivity, you can begin detecting gas leaks.
- Detection Process: Slowly move the sensor tip of the detector close to areas where you suspect a gas leak, such as gas pipelines, appliance connections, or gas storage tanks.
- Interpreting Alerts:
- If gas is detected, the device will emit an audible alarm (75dB) and the visual bar graph on the LCD will increase, turning red at higher concentrations.
- The response time is approximately 0.5 to 2 seconds.
- Action on Detection: If a gas leak is detected, immediately turn off the gas supply, open windows and doors for ventilation, and evacuate the area. Do not operate electrical switches or phones. Contact your gas provider or emergency services.
Image 4: The gas detector indicating a leak with a red LCD display and sound waves, demonstrating its audible and visual alarm features near a gas stove.
Image 5: A hand holding the gas detector near a gas stove burner, showing the device's quick response time and sensitivity modes (50-500PPM High Sensitivity, 500-1000PPM Low Sensitivity).
Operating Video Guides
Video 1: This video demonstrates various applications of the Natural Gas Detector, showing how it can be used to check for leaks in different household and outdoor settings.
Video 2: This video provides a detailed explanation of the Natural Gas Detector's functions and features, guiding users through its capabilities.
5. Întreținere
- Înlocuire baterie: When the low battery indicator appears on the LCD, replace the two AAA batteries promptly to ensure accurate operation.
- curatenie: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water. Keep the sensor tip clean and free from obstructions.
- Depozitare: Store the detector in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
6. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Dispozitivul nu pornește. | Baterii descărcate sau introduse incorect. | Înlocuiți bateriile cu baterii AAA noi, asigurându-vă că polaritatea este corectă. |
| No gas detection or inconsistent readings. | Warm-up not complete, sensor obstructed, or low battery. | Ensure warm-up is complete. Clean the sensor tip. Replace batteries if low. |
| Alarme false. | Presence of other volatile organic compounds (VOCs) like alcohol, acetone, or strong cleaning agents. | Ensure the testing area is free from other VOCs. Test in a well-ventilated area. |
7. Specificații
| Caietul de sarcini | Detaliu |
|---|---|
| Marca | YOJOCK |
| Numărul de model | HT60 |
| Dimensiunile produsului | 6.7" D x 0.9" L x 1.1" H |
| Greutatea articolului | 0.12 lire sterline (1.92 uncii) |
| Sursa de alimentare | Alimentat cu baterii (2 baterii AAA incluse) |
| Tip senzor | Senzori semiconductori |
| Alarma | Audible (75dB) & Visual Alarm |
| Umiditatea de funcționare | 20 ~ 80%RH |
| Evaluarea temperaturii superioare | 50 de grade Celsius |
| Material | PVC |
8. Garanție și asistență
Your purchase includes a 3-year warranty. Our customer support team is available to assist you with any questions or concerns within 24 hours. For support, please refer to the contact information provided with your product packaging or visit the official YOJOCK website-ul.
Image 6: YOJOCK Customer Care details, highlighting 36 months after-service & lifetime technical support, 24-hour customer support, and faster shipping by Amazon.