VIRIBUS ABE-S1AB-AB

VIRIBUS Electric Tricycle Instruction Manual

Model: ABE-S1AB-AB

Ghidul dumneavoastră pentru o operare sigură și eficientă.

1. Informații de siguranță

Always prioritize safety when operating your VIRIBUS Electric Tricycle. Read all instructions carefully before assembly and use. Failure to follow safety guidelines may result in serious injury or damage to the product.

  • Purtați o cască și echipament de protecție adecvat în orice moment.
  • Asigurați-vă că toate componentele sunt fixate în siguranță înainte de fiecare plimbare.
  • Nu conduceți tricicleta sub influența alcoolului sau a drogurilor.
  • Respectați legile și reglementările locale de trafic.
  • Verificați periodic frânele, anvelopele și bateria pentru a verifica funcționarea corectă.
  • Țineți mâinile și picioarele departe de piesele în mișcare.

2. Ce se află în cutie

Verificați dacă toate componentele sunt prezente la despachetare:

  • 1x Adult Electric Tricycle
  • 1x încărcător
  • 1x baterie
  • 1x cablu de alimentare
  • 1x Fastener Set
  • 1 x șurubelniță
  • 1x Wrench Set
  • 1x manual de instrucțiuni
  • 1x Rear Basket
  • 1x Horn
  • 1x Lacăt
  • 1x trusă de scule

3. Montare și asamblare

Follow these steps to assemble your VIRIBUS Electric Tricycle. For a visual guide, please refer to the assembly video below.

Video 1: Geemax Electric Tricycle Assembly Guide. This video demonstrates the step-by-step process of unboxing and assembling the tricycle components, including handlebars, wheels, brakes, and accessories.

  1. Unboxing și configurare inițială: Carefully remove all components from the packaging. (Refer to Video 1: 0:00)
  2. Instalare ghidon: Insert the handlebar stem into the frame and tighten the screw securely. (Refer to Video 1: 0:08)
  3. Instalare lanț: Remove the frame protection, pass the chain through the chainwheel, connect the chain, and ensure it is locked. Then, install the chain onto the flywheel. Adjust the rear axle to ensure smooth chain operation and tighten the four screws. (Refer to Video 1: 0:18 - 1:43)
  4. Instalarea pedalei: Install the pedals. Note that the 'R' pedal installs by turning clockwise, and the 'L' pedal installs by turning counterclockwise. (Refer to Video 1: 1:44)
  5. Instalare aripa: Assemble the front fender by attaching its support stay. Install the red reflectors and support stays on both the rear left and rear right fenders. (Refer to Video 1: 2:00 - 3:39)
  6. Headlight and Front Fender Installation: Remove the fork protection. Install the headlight and the assembled front fender onto the front fork simultaneously, then tighten them with screws. (Refer to Video 1: 3:40 - 4:03)
  7. Instalarea roții din față: Remove the screws and washers from the front wheel. Place the front wheel onto the fork, connect the motor wire (arrow to arrow), and install the safety hook. Securely tighten all components. (Refer to Video 1: 4:04 - 4:59)
  8. Rear Fender Installation: Install the rear fenders onto the rear axle. The process is the same for both the left and right sides. (Refer to Video 1: 5:00 - 5:45)
  9. Rear Wheel Installation: Install the rear wheels. Ensure each rear wheel is on the same plane as its respective rear axle and fits perfectly. (Refer to Video 1: 5:46 - 6:28)
  10. Brake Installation and Adjustment: Install the left and right brakes by removing the screws and washers from the brake calipers and installing them onto the frame. Adjust the screw on the opposite side of the brake to ensure the brake and brake disc are not in contact. Insert the brake cable, tighten it, and lock it with the screw. (Refer to Video 1: 6:29 - 8:10)
  11. Saddle Assembly and Installation: Assemble the saddle onto the seat post and then insert the seat post into the tricycle frame. Adjust to a comfortable height and secure. (Refer to Video 1: 8:11 - 8:28)
  12. Rear Basket Assembly and Bag Installation: Assemble the wire mesh rear basket. Once assembled, place the provided bag inside the basket and secure it. (Refer to Video 1: 8:29 - 9:39)
  13. Front Reflector and Stem Cap: Install the front reflector onto the handlebar and secure the cap on the stem. (Refer to Video 1: 9:40 - 9:55)
  14. Motor Wire Fixation: Securely fix the motor wire to prevent interference or damage during operation. (Refer to Video 1: 9:56 - 10:03)

4. Instrucțiuni de utilizare

Your VIRIBUS Electric Tricycle offers versatile riding modes and intuitive controls for an enjoyable experience.

4.1 Moduri de condus

  • Modul accelerație: Engage the throttle for motor-powered assistance up to 15.5 mph without pedaling.
  • Modul de asistență la pedală: Choose from five assistance levels (7.5/9.5/11/13/15.5 mph) to augment your pedaling effort.
  • Control manual: Ride as a traditional tricycle using the 7-speed Shimano derailleur.
Illustration of three riding modes: throttle, pedal assist, and manual control.

Imaginea 1: Visual representation of the three distinct riding modes available on the VIRIBUS Electric Tricycle.

4.2 Intuitive Controls and Display

Ecranul LCD oferă informații esențiale dintr-o privire:

  • Contor baterie: Always know your current charge level.
  • Vitezometru: Track your speed in MPH or KM/H.
  • Nivel PAS: Select assistance levels 1-5 to run at a percentage of top speed.
  • Odometru: View your trip's distance and total distance traveled.
Close-up of the tricycle's handlebars showing the LCD display and controls for throttle, light, and horn.

Imaginea 2: The tricycle's intuitive handlebar controls and LCD display, showing battery, speed, PAS level, and odometer readings.

4.3 Battery and Headlight Usage

The tricycle is equipped with a UL certified 48V 13Ah removable battery. Use the provided key to turn the battery on/off and to remove it for charging or security. The headlight can be activated via the controls on the handlebar. (Refer to Video 1: 10:04)

Close-up of the UL Certified 48V 13Ah Lithium battery with dual charging options and BMS protection.

Imaginea 3: The UL Certified 48V 13Ah battery, highlighting its safety features and dual charging options.

4.4 Încărcarea bateriei

To charge the battery, connect the charger to the battery port. The red indicator light on the charger signifies that charging is in progress. The light will turn green when the battery is fully charged. (Refer to Video 1: 10:30)

5. Întreținere

Regular maintenance ensures the longevity and safe operation of your electric tricycle.

  • cauciucuri: Verificați presiunea în anvelope înainte de fiecare plimbare. Mențineți presiunea recomandată în PSI pentru performanță și siguranță optime.
  • Frane: Inspect brake pads and discs regularly for wear. Ensure brake levers are responsive and cables are not frayed. Adjust as needed to maintain effective stopping power.
  • Îngrijirea bateriei: Charge the battery fully after each use. Avoid completely draining the battery. Store the battery in a cool, dry place when not in use.
  • Chains: Keep chains clean and lubricated to ensure smooth gear changes and prevent rust.
  • Cadru și elemente de fixare: Verificați periodic strângerea tuturor șuruburilor, piulițelor și elementelor de fixare. Strângeți orice componente slăbite.
  • curatenie: Curățați tricicleta cu adamp Evitați utilizarea jeturilor de apă cu presiune înaltă direct pe componentele electrice.

6. Depanare

Iată câteva probleme comune și posibilele lor soluții:

ProblemăCauza posibilaSoluţie
Tricycle does not power onBattery is off or not charged; loose battery connection; faulty power button.Ensure battery is on and charged. Check battery connection. Contact support if power button is faulty.
Motorul nu asistăPAS level is 0; motor wire disconnected; faulty motor.Increase PAS level on the display. Check motor wire connection (arrow to arrow). Contact support if motor is faulty.
Frânele se simt slabeWorn brake pads; loose brake cable; brake disc misalignment.Inspect and replace worn brake pads. Adjust brake cable tension. Ensure brake disc is aligned and not rubbing.
Zgomote neobișnuite în timpul mersuluiLoose components; dry chain; tire rubbing.Check and tighten all fasteners. Lubricate the chain. Inspect tires for rubbing against fenders or frame.

7. Specificații

CaracteristicăDetaliu
Tip bicicletaBicicletă electrică
Interval de vârstăAdult
MarcaVIRIBUS
Numărul de viteze7
CuloareAlbastru Regal
Dimensiunea roții26 inchi
Material cadruOțel carbon
Tip suspensieFaţă
Caracteristici speciale48V 13Ah Battery, Dual Chain Design, Front Suspension, UL Certified Battery
Stil de frânăDisc
Utilizări specificeCommuting, Leisure Riding, Urban Transportation
Numele modeluluiABE-S1AB-AB
Sursa de alimentareMotor electric
Wattage350 W (vârf 500 W)
Conținutul de energie al bateriei cu litiu624 wați-oră (48V 13Ah)
Tip material scaunVinil
Greutate maximă recomandată330 lire sterline
Asamblare necesarăDa
Tip schimbător de viteze pentru bicicletăDegetul mare
Înălțimea minimă a utilizatorului5.2 picioare
Fender MaterialOţel
Derailleur ConfigurationSpate
UPC850062264915
Tip de asistență electricăAsistență la pedală
Tip cadruPas cu pas

8. Garanție și asistență

For warranty information, technical support, or any inquiries regarding your VIRIBUS Electric Tricycle, please refer to the contact details provided with your purchase documentation or visit the official VIRIBUS webPăstrați dovada achiziției pentru reclamații în garanție.

© 2024 VIRIBUS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.