Amewi Stingray Speedboat (Model 26108) Instruction Manual

1. Informații importante privind siguranța

Avertizare: This product is not suitable for children under 3 years due to small parts that could be swallowed, posing a choking hazard.

• Always operate the speedboat in open water areas, away from swimmers, animals, and other watercraft.
• Ensure the operating area is clear of obstacles such as weeds, rocks, or debris that could interfere with the jet drive.
• Do not operate the boat in saltwater, as this can damage internal components.
• Keep fingers and loose clothing away from the jet drive intake and outlet during operation.
• Always remove the battery from the boat and the transmitter when not in use.
• Supravegheați copiii în timpul funcționării.

2. Ce se află în cutie

Vă rugăm să verificați conținutul coletului în raport cu lista de mai jos:

• Amewi Stingray Speedboat Model
• 2.4GHz Control de la distanță
• Li-ion 2S 7.4V 2000mAh 15C Battery
• Cablu de încărcare USB
• Instrument
• Stand cu barca
• Manual de instrucțiuni (acest document)

Accesorii necesare (nu sunt incluse): 3 x 1.5V AA batteries for the remote control.

3. Ghid de instalare

3.1. Încărcarea bateriei bărcii

The included Li-ion 2S 7.4V 2000mAh battery powers the speedboat.

1. Connect the Li-ion battery to the USB charging cable.
2. Conectați cablul de încărcare USB la o sursă de alimentare USB adecvată (de exemplu, portul USB al computerului, adaptorul USB de perete).
3. The charging indicator on the USB cable will show the charging status (refer to the charger's specific indicator behavior).
4. Charging typically takes 90-120 minutes. Do not overcharge the battery.
5. Odată încărcată complet, deconectați bateria de la încărcător.

Image: Internal components of the speedboat, including the battery and motor assembly.

3.2. Instalarea bateriilor emițătorului

The 2.4GHz remote control requires 3 x 1.5V AA batteries (not included).

1. Deschideți compartimentul bateriei de pe spatele telecomenzii.
2. Introduceți 3 baterii AA, asigurând polaritatea corectă (+/-).
3. Închideți bine compartimentul bateriei.

Image: The 2.4GHz remote control for the speedboat.

3.3. Preparing the Speedboat

1. Carefully remove the top hull cover(s) of the speedboat. The boat features a double hull cover for water protection.
2. Connect the fully charged Li-ion battery to the boat's power connector.
3. Carefully place the battery inside the hull, ensuring wires are not pinched.
4. Securely reattach both hull covers to prevent water ingress. Ensure all latches or seals are properly engaged.

Imagine: Sus view of the speedboat, showing the double hull cover design.

4. Instrucțiuni de utilizare

4.1. Pornire și împerechere

1. Place the speedboat gently into the water. The boat's electronics will activate upon contact with water.
2. Turn on the remote control. The remote control and boat should automatically pair. A successful pairing is usually indicated by a solid light on both devices.
3. Dacă asocierea eșuează, opriți ambele dispozitive și repetați procesul.

4.2. Controale de bază

• Declanșator de accelerație: Pull the trigger to move forward, push to reverse (if applicable). The jet drive provides strong acceleration.
• Volan: Turn the wheel left or right to steer the boat. The thrust vector control allows for high agility and maneuverability.
• Ajustări de trim: Use the trim buttons on the remote control to fine-tune steering and throttle for straight running.
• Rash Limitation (Dual Rate): Adjust the sensitivity of the steering and throttle for different driving styles or conditions.

Imagine: Spate view of the speedboat, highlighting the jet drive mechanism.

4.3. Caracteristici avansate

• Switchable LED Lighting: The boat features front and rear LED lighting, which can be switched on/off via the transmitter. This is useful for operation at dusk.
• Subervoltage Avertisment: The 2.4GHz transmitter system includes an undervoltage warning function to prevent the boat battery from being discharged too deeply. Pay attention to audible or visual warnings from the transmitter.
• Range Warning: The transmitter will alert you if the boat is approaching or exceeding its maximum operating range (60-80 meters). Bring the boat closer immediately if this warning activates.
• Self-Righting Function: In case of a rollover, the boat is designed to self-right, allowing it to continue operation without manual intervention.

The Amewi Stingray Speedboat can reach speeds of up to 40 km/h and offers a driving time of up to 12 minutes on a full charge.

5. Întreținere

• După fiecare utilizare:
  • Remove the boat from the water and immediately disconnect the battery.
  • Open the hull covers and carefully drain any accumulated water. Wipe the interior dry with a soft cloth.
  • Inspect the jet drive intake for any debris (weeds, leaves, etc.) and remove them carefully.
  • Clean the exterior of the boat with a damp pânză. Nu utilizați substanțe chimice dure.
  • Ensure the water cooling system's inlet and outlet are clear.
• Îngrijirea bateriei:
  • Store Li-ion batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Do not store batteries fully charged or fully discharged for extended periods. Aim for a storage charge of around 50%.
• Hull Seals: Regularly inspect the rubber seals around the hull covers for any signs of wear or damage. Damaged seals can lead to water ingress.

6. Depanare

7. Specificații

8. Garanție și asistență

For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Manufacturer: Amewi