Ashly TM-360 Public Address Mixer/AmpManual de utilizare mai viu

Introducere

This manual provides essential information for the proper installation, operation, and maintenance of your Ashly TM-360 Public Address Mixer/Amplifier. The TM-360 is a 60-watt, 3-input mixer/amplifier designed for public address applications, featuring transformer-isolated constant-voltage and 4 Ohm outputs. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

Informații de siguranță

Respectați întotdeauna măsurile de siguranță de bază atunci când utilizați produse electrice pentru a reduce riscul de incendiu, electrocutare și vătămare corporală. Acestea includ, dar nu se limitează la:

• Citiți toate instrucțiunile înainte de a utiliza aparatul.
• Nu utilizați acest aparat lângă apă.
• Curățați numai cu o cârpă uscată.
• Nu blocați niciun orificiu de ventilație. Instalați conform instrucțiunilor producătorului.
• Nu instalați lângă nicio sursă de căldură, cum ar fi calorifere, registre de căldură, sobe sau alte aparate (inclusiv ampliificatori) care produc căldură.
• Nu înfrângeți scopul de siguranță al ștecherului polarizat sau cu împământare. Un ștecher polarizat are două lame, una mai lată decât cealaltă. Un ștecher de tip împământare are două lame și un al treilea ștecher de împământare. Lama lată sau al treilea vârf sunt prevăzute pentru siguranța dumneavoastră. Dacă ștecherul furnizat nu se potrivește în priză, consultați un electrician pentru înlocuirea prizei învechite.
• Protejați cablul de alimentare să nu fie călcat sau ciupit, în special la prize, prize convenabile și la punctul de ieșire din aparat.
• Utilizați numai atașamente/accesorii specificate de producător.
• Deconectați acest aparat din priză în timpul furtunilor cu fulgere sau când nu este utilizat pentru perioade lungi de timp.
• Toate lucrările de întreținere se adresează personalului de service calificat. Întreținerea este necesară atunci când aparatul a fost deteriorat în vreun fel, cum ar fi cablul de alimentare sau ștecherul este deteriorat, s-a vărsat lichid sau au căzut obiecte în aparat, aparatul a fost expus la ploaie sau umezeală, nu funcționează normal , sau a fost abandonat.

AVERTIZARE: Pentru a reduce riscul de incendiu sau electrocutare, nu expuneți acest aparat la ploaie sau umezeală.

Produs terminatview

The Ashly TM-360 is a versatile public address mixer/amplifier designed for various sound reinforcement needs. Key features include:

• 3 microphone inputs for versatile audio source connectivity.
• 60-watt speaker output capable of driving 4 ohm, 8 ohm, 70 volt, or 25 volt speakers.
• Zone 2 output capable of driving external amplifiers, or a 1-watt 8 ohm speaker.
• Two-band EQ for master output for tone shaping.
• Easy-to-use controls located on the front panel for convenient operation.

Înființat

Conexiuni la panoul din spate

The rear panel of the TM-360 provides all necessary connections for power, audio inputs, and speaker outputs. Refer to the image below for a visual guide.

Figura 1: Ashly TM-360 Rear Panel Layout. This image displays the AC input, amplifier output terminals, Zone 2 output, mix configuration switches, input gain controls, and various audio input jacks (RCA and terminal blocks).

• AC INPUT (120V~ 60Hz, 24W): Connect the provided power cord here. Ensure the voltage se potrivește cu sursa de alimentare locală.
• AMPLIFIER OUTPUT 60W: This terminal block provides the main speaker output.
  • COM: Common ground connection.
  • 4Ω: For 4 Ohm speakers.
  • 16V OPT, 25V, 70V, 11Ω, 8Ω: Various constant voltage and low impedance output options. Connect speakers according to their impedance and desired voltage. The "LINK" terminal is for linking multiple units.
• ZONE 2 OUT: This output provides a secondary audio feed.
  • PRE OUT LOW Z BAL 600Ω: Balanced low impedance pre-output for connecting to external ampliificatori.
  • 1W 8Ω: For connecting a single 1-watt, 8 Ohm speaker directly.
• INPUT 1 (LINE/MIC): Features a terminal block for balanced line or microphone input. Includes a gain control knob (-10 to +50 dB) and a priority over Input 2 and 3.
• INPUT 2 (RCA/Terminal Block): Offers both RCA and terminal block connections. Includes a gain control knob (-10 to +10 dB) and priority over Input 3.
• INPUT 3 (RCA): RCA input connection. Includes a gain control knob (-10 to +10 dB).
• MANUAL MUTE (CONTACT CLOSURE): Terminal block for external control.
  • 1 & G = INPUT 1 TRIG: Triggers Input 1.
  • G & 2 = MASTER SYSTEM STANDBY: Puts the entire system into standby mode.

Mix Configuration Switch Settings

The TM-360 features a set of DIP switches on the rear panel to configure various mixing and input behaviors. These switches are labeled 1 through 8 under "MIX CONFIGURATION".

Figura 2: Mix Configuration Switch Settings. This image highlights the DIP switches and their corresponding functions for Zone 2 assignment, VOX trigger, mute, low cut, and phantom power.

Nota: Adjust these switches with the unit powered off to prevent unexpected audio behavior.

Instrucțiuni de operare

Operare de bază

1. Pornire: Ensure all connections are secure before plugging the unit into an AC outlet. The unit will power on automatically.
2. Conexiune de intrare: Connect your audio sources (microphones, line-level devices) to the appropriate input jacks (Input 1, 2, or 3) on the rear panel.
3. Conexiune difuzor: Conectați-vă difuzoarele la AMPLIFIER OUTPUT terminal block, matching the impedance and voltage settings. For Zone 2, connect either an external amplifier or a 1W 8Ω speaker.
4. Ajustați amplificarea de intrare: Use the GAIN knobs for each input to set the appropriate input level. Start with the gain at minimum and slowly increase until the desired level is achieved without distortion.
5. Adjust Master Output: Use the master volume control (typically on the front panel, though not detailed in the provided image) to set the overall output level.
6. Adjust Zone 2 Level: Use the ZONE 2 LEVEL knob on the rear panel to control the output level for Zone 2.

Reglarea câștigului de intrare

Each input (Input 1, Input 2, Input 3) has a dedicated gain control knob on the rear panel. These knobs allow you to match the input sensitivity of the amplifier to the output level of your audio source.

• Câștig intrare 1: Adjustable from -10 dB to +50 dB, suitable for both line and microphone levels. Input 1 has priority over Input 2 and Input 3.
• Câștig intrare 2: Adjustable from -10 dB to +10 dB. Input 2 has priority over Input 3.
• Câștig intrare 3: Adjustable from -10 dB to +10 dB.

To set the gain, start with the knob fully counter-clockwise (minimum gain). Play your audio source at its typical operating level and slowly turn the gain knob clockwise until the signal is clear and strong without clipping or distortion. If a signal is too hot even at minimum gain, consider using an attenuator or a different input.

Zone 2 Level Control

The ZONE 2 LEVEL knob controls the output volume for the Zone 2 output. This allows for independent volume adjustment of the secondary audio zone. Turn the knob clockwise to increase the level and counter-clockwise to decrease it. The range is from OFF to MAX.

Manual Mute Function

The MANUAL MUTE terminal block allows for external control of muting functions via contact closure.

• 1 & G = INPUT 1 TRIG: Connecting a contact closure between terminal 1 and G will trigger a specific function related to Input 1, typically muting other inputs or activating a priority override.
• G & 2 = MASTER SYSTEM STANDBY: Connecting a contact closure between terminal G and 2 will put the entire TM-360 system into standby mode, effectively muting all outputs.

Consult specific system design documentation for detailed implementation of these contact closure functions.

Întreţinere

The Ashly TM-360 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:

• curatenie: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol sprays.
• Ventilare: Ensure that the ventilation openings on the unit are not blocked. Adequate airflow is crucial for preventing overheating.
• Organizare de cabluri: Periodically check all cables for wear and tear. Replace damaged cables immediately.
• Depozitare: If storing the unit for an extended period, keep it in a cool, dry place, away from direct sunlight and extreme temperatures.

În interior nu se află piese care pot fi reparate de utilizator. Apelați la personal de service calificat pentru orice operațiune.

Depanare

If you encounter issues with your TM-360, consult the following common troubleshooting steps:

If the problem persists after trying these steps, contact Ashly customer support or a qualified service technician.

Specificații

• Marca: Ashly
• Model: TM-360
• AmpIeșire liifier: 60 wați
• Număr de intrări: 3 (Microphone/Line)
• Speaker Output Options: 4 Ohm, 8 Ohm, 25 Volt, 70 Volt
• Zone 2 Output: Pre Out Low Z Balanced 600 Ohm, 1 Watt 8 Ohm
• Master EQ: Two-band
• Tehnologie de conectivitate: Bluetooth
• Sursa de alimentare: Corded Electric (AC INPUT 120V~ 60Hz, 24W)
• Audio Input Types: Mic, Line (TRS or XLR equivalent via terminal blocks, RCA)
• UPC: 694970608528

Informații despre garanție

The Ashly TM-360 Public Address Mixer/Amplifier vine cu a 5 an garanție from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to register your product, please refer to the official Ashly website-ul sau contactați serviciul de asistență pentru clienți.

Păstrați dovada achiziției pentru cererile de garanție.

Sprijin

For further assistance, technical support, or service inquiries regarding your Ashly TM-360, please visit the official Ashly website or contact their customer service department. You can typically find contact information, FAQs, and additional resources on their support pages.

Ashly Audio Inc.
www.ashly.com