Memphis Audio SRX693V

Memphis Audio SRX693V 6x9 Inch 3-Way Coaxial Speakers

Manual de instructiuni

Introducere

This manual provides essential information for the proper installation, operation, and maintenance of your Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speakers. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and longevity of your product.

Informații de siguranță

  • Deconectați întotdeauna borna negativă a bateriei vehiculului înainte de a începe orice lucrare electrică.
  • Asigurați-vă că toate cablurile sunt izolate corespunzător pentru a preveni scurtcircuitele.
  • Mount speakers securely to prevent them from becoming loose during vehicle operation.
  • Avoid installing speakers in locations that obstruct vehicle safety features or driver visibility.
  • Consultați un instalator profesionist de sisteme audio auto dacă nu sunteți sigur de pașii de instalare.

Conținutul pachetului

The package for your Memphis Audio SRX693V speakers should contain the following items:

  • SRX693V 6x9 Inch 3-Way Coaxial Speakers (Pair)

Specificații

MarcaMemphis Audio
Numele modeluluiSRX693V
Tip difuzorCoaxial
Dimensiunea difuzorului9 Inches (6x9 inch oval)
Putere maximă de ieșire difuzor110 wați
Tehnologia de conectivitateCoaxial
Tip de montareSpălați montura
Dimensiuni articol (D x L x H)9.8" D x 7.3" L x 7.4" H
Greutatea articolului5.4 lire sterline
Material conPolipropilenă
Material pentru tweeterPEI
Material înconjurătorCauciuc

Configurare și instalare

Proper installation is crucial for optimal sound quality and speaker longevity. Follow these general steps:

  1. Preparare: Disconnect the vehicle's battery. Identify suitable mounting locations for the 6x9 inch speakers, typically in door panels or rear deck. Ensure adequate clearance for the speaker's depth.
  2. Montare: If replacing existing speakers, remove the old units. Use the provided template (if available) or the speaker itself to mark and cut the mounting hole if necessary. Secure the speakers using appropriate screws and mounting hardware.
  3. Cablaj: Connect the speaker wires to your vehicle's audio system. Pay close attention to polarity (+ to + and - to -) to ensure correct phase and sound reproduction. The SRX693V speakers are designed for coaxial connection.
  4. Testare: Reconnect the vehicle's battery. Turn on your audio system at a low volume to test the speakers. Gradually increase the volume and check for clear sound from both speakers.
  5. Finisare: Reassemble any removed panels or grilles.
Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, front view

Figura 1: Față view of the Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker.

Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, angled view showing cone and tweeters

Figura 2: Înclinat view of the SRX693V speaker, highlighting the polypropylene cone and PEI tweeters.

Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, side profile arată adâncimea de montare

Figura 3: Pro lateralfile of the SRX693V speaker, illustrating its slim mounting depth.

Spate view of the Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, showing the magnet and terminals

Figura 4: Spate view of the SRX693V speaker, showing the magnet structure and wiring terminals.

Instrucțiuni de operare

Once installed, your Memphis Audio SRX693V speakers will operate as part of your vehicle's audio system. For optimal performance:

  • Sursa audio: Asigurați-vă că unitatea principală sau amplifier is properly configured to send audio signals to the speakers.
  • Controlul volumului: Adjust the volume to a comfortable listening level. Avoid prolonged listening at excessively high volumes to prevent speaker damage and hearing loss.
  • Egalizare: Use your audio system's equalizer settings to fine-tune the sound to your preference. Start with flat settings and make small adjustments.
  • Perioada de rodare: Allow a short break-in period (typically a few hours of normal use) for the speaker components to settle, which can improve sound quality.

Întreţinere

Your Memphis Audio SRX693V speakers require minimal maintenance:

  • curatenie: Ștergeți ușor grilele și împrejurimile difuzoarelor cu o cârpă moale și uscată pentru a îndepărta praful. Evitați utilizarea substanțelor chimice dure sau a produselor de curățare abrazive.
  • Inspecţie: Periodically check the speaker mounts and wiring connections to ensure they remain secure.
  • Factori de mediu: Deși sunt concepute pentru utilizare în industria auto, evitați expunerea difuzoarelor la umiditate excesivă sau temperaturi extreme.

Depanare

If you encounter issues with your speakers, consider the following:

ProblemăCauza posibilaSoluţie
Fără sunet din difuzoareLoose wiring connection, incorrect polarity, amplifier issue, head unit settings.Verificați strângerea și polaritatea corectă a tuturor conexiunilor cablurilor. Verificați amplifier and head unit are powered on and configured correctly.
Sunet distorsionatOver-driving speakers (volume too high), incorrect amplifier gain settings, damaged speaker.Reduceți volumul. Ajustați amplifier gain settings. Inspect speaker cone and surround for visible damage.
Un difuzor nu funcționeazăLoose connection to that specific speaker, damaged speaker wire, faulty speaker.Check wiring for the non-working speaker. Swap speakers (if possible) to determine if the issue is with the speaker or the wiring/source.

Garanție și suport

Your Memphis Audio SRX693V speakers are covered by a 1 an garanție de producător. Această garanție acoperă defectele de materiale și de manoperă în condiții normale de utilizare.

For warranty claims, technical support, or further assistance, please contact Memphis Audio customer service or visit their official webPăstrați dovada achiziției pentru validarea garanției.

© 2026 Memphis Audio. Toate drepturile rezervate.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.