ECD Germany 2.5T Hydraulic Car Jack (Model IP-2150) Instruction Manual

Introducere

This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your ECD Germany 2.5T Hydraulic Car Jack. Please read this manual thoroughly before operation to ensure proper handling and to prevent personal injury or damage to property.

Instrucțiuni importante de siguranță

AVERTIZARE: Failure to follow these instructions may result in serious injury or death. Always prioritize safety when operating lifting equipment.

• Read Entire Manual: Understand all instructions and warnings before using this jack.
• Capacitate nominală: Do not exceed the jack's rated capacity of 2.5 tons (2500 kg).
• Suprafață stabilă: Always use the jack on a hard, level, and stable surface. Avoid soft ground or inclines.
• Stabilitatea vehiculului: Ensure the vehicle is in park (P), the ignition is off, and the parking brake is engaged. Block wheels that are not being lifted.
• Proper Lift Points: Only lift the vehicle at manufacturer-recommended lift points. Use the provided rubber pads to protect the vehicle's chassis.
• Standuri de suport: After lifting, immediately support the vehicle with appropriate jack stands. Never work under a vehicle supported only by a hydraulic jack.
• Goliți zona: Keep hands, feet, and other body parts clear of moving parts and the area under the vehicle.
• Lowering Slowly: Coborâți vehiculul încet și cu grijă.
• Inspecţie: Verificați cricul pentru a depista eventuale deteriorări sau scurgeri înainte de fiecare utilizare. Nu îl utilizați dacă este deteriorat.
• Copii și martori: Țineți copiii și persoanele neautorizate departe de zona de lucru.

Conținutul pachetului

Verificați dacă toate componentele sunt prezente și nedeteriorate la despachetare:

• 1 x ECD Germany 2.5T Hydraulic Car Jack
• 2 x Rubber Pads (for scratch and slip protection)
• 1 x SUV Adapter (for increased lift height)
• 1 x Pump Lever (operating handle)

Image: The hydraulic jack shown with its pump lever, two rubber pads, and an SUV adapter, as included in the package.

Specificații

Image: Detailed dimensions of the hydraulic jack, illustrating its minimum and maximum lift heights, and overall length.

Configurare și pregătire

1. Despacheta: Carefully remove the jack and all accessories from the packaging.
2. Inspecta: Check the jack for any signs of damage or oil leaks that may have occurred during shipping. Do not use if damaged.
3. Asamblați mânerul: Insert the pump lever into the handle socket. Ensure it is securely seated.
4. Bleed Air (First Use): Before first use, it is recommended to bleed any air from the hydraulic system.
   • Rotiți supapa de eliberare în sens invers acelor de ceasornic pentru a o deschide complet.
   • Pump the handle several times to expel any trapped air.
   • Rotiți supapa de eliberare în sensul acelor de ceasornic pentru a o închide.
5. Atașați accesorii: Place a rubber pad on the saddle of the jack. If lifting an SUV or a vehicle requiring extra height, attach the SUV adapter on top of the rubber pad.

Image: Illustration of attaching the rubber pad and SUV adapter to the jack's saddle for proper vehicle contact and protection.

Instrucțiuni de operare

Ridicarea unui vehicul:

1. Pregătiți vehiculul: Park the vehicle on a firm, level surface. Engage the parking brake and place the transmission in "Park" (automatic) or a low gear (manual). Block the wheels that will remain on the ground.
2. Position Jack: Locate the vehicle manufacturer's recommended lifting points. Position the jack directly under the designated lift point, ensuring the saddle with the rubber pad (and SUV adapter if needed) is centered and making full contact.
3. Supapă de eliberare închisă: Turn the pump lever clockwise until the release valve is fully closed. This prepares the jack for lifting.
4. Vehicul de ridicare: Pump the handle up and down to raise the vehicle to the desired height. Lift only high enough to perform the necessary work.
5. Fixare cu suporturi pentru cric: Immediately place appropriately rated jack stands under the vehicle's designated support points. Lower the vehicle slowly until it rests securely on the jack stands. Never rely solely on the hydraulic jack for support.
6. Scoateți Jack: Once the vehicle is safely supported by jack stands, you can remove the hydraulic jack.

Image: The hydraulic jack correctly placed under a vehicle's designated lifting point, demonstrating proper positioning before lifting.

Coborârea unui vehicul:

1. Ridicați ușor: If the vehicle is on jack stands, pump the jack handle a few times to slightly raise the vehicle off the jack stands.
2. Scoateți suporturile de cric: Scoateți cu grijă suporturile de cric de sub vehicul.
3. Vehicul inferior: Slowly turn the pump lever counter-clockwise to open the release valve. The vehicle will begin to lower. Control the lowering speed by adjusting how much you open the valve.
4. Complet coborât: Once the vehicle is fully lowered and resting on the ground, remove the jack from underneath.

Image: A visual guide to the jack's lifting and lowering mechanism, including how to insert the lever and open the drain valve for controlled descent.

Întreţinere

• Lubrifiere: Ungeți periodic toate piesele mobile cu ulei de mașină ușor.
• Ulei hidraulic: Check the hydraulic oil level regularly. If low, refill with high-quality hydraulic jack oil. Do not use brake fluid or other fluids.
• curatenie: Păstrați cricul curat și fără murdărie, grăsime și resturi.
• Depozitare: Store the jack in a dry, clean place with the ram fully retracted to prevent corrosion and seal damage.
• Inspecţie: Regularly inspect for wear, damage, or leaks. Any damaged parts must be replaced by qualified personnel.

Depanare

Informații despre garanție

The manufacturer provides a warranty for this product. Please refer to the warranty card included with your purchase or visit the official ECD Germany webConsultați site-ul pentru termenii și condițiile detaliate ale garanției. Păstrați dovada achiziției pentru solicitările de garanție.

The product specifications indicate that a manufacturer's warranty is provided.

Asistență pentru clienți

For technical assistance, spare parts, or warranty inquiries, please contact ECD Germany customer service. You can find contact information on the official ECD Germany website-ul web sau prin intermediul distribuitorului dumneavoastră.

Resurse online: Visit the ECD Germany Store on Amazon