HOSTACK King Bed Frame Instruction Manual

Introducere

This manual provides detailed instructions for the assembly, operation, and maintenance of your HOSTACK King Bed Frame. Please read this manual thoroughly before beginning assembly to ensure safe and correct usage. This bed frame features a 55-inch headboard, upholstered in velvet with handmade pleats and deep button tufting, and a wingback design. It is designed for use without a box spring and includes wood slat support.

Informații importante privind siguranța

AVERTIZARE: Keep away from young children and pets to prevent choking hazards from small parts. Always follow assembly instructions precisely to prevent injury. Do not exceed the maximum weight capacity of 1200 pounds. Ensure all connections are securely fastened before use. Periodically check and re-tighten all bolts and screws.

Lista componentelor

Înainte de asamblare, verificați dacă toate piesele enumerate mai jos sunt prezente și nedeteriorate. Dacă lipsesc sau sunt deteriorate piese, vă rugăm să contactați serviciul de asistență pentru clienți.

Configurare și asamblare

This bed frame is designed for straightforward assembly. All necessary tools are included. It is recommended to assemble with two people.

1. Pasul 1: Despachetați și identificați piesele

   Carefully unpack all components from the single box. Lay them out on a clean, soft surface to prevent scratches. Refer to the Components List (Table 1) to identify each part.

   

   Figura 1: Pesteview of King Bed Frame components and dimensions. Dimensions are 85.1"L x 81.5"W x 55.1"H. Recommended mattress thickness is 10-12 inches. Weight capacity is 1000 lbs.
2. Pasul 2: Atașați șinele laterale la tăblia și piciorul patului

   Align the side rails (C) with the pre-drilled holes on the headboard (A) and footboard (B). Secure them using the bolts and washers from the hardware pack (F). Do not fully tighten the bolts until all major components are connected.

   

   Figura 2: Față view cadrului de pat asamblat, aratăasing the tufted headboard and footboard with nailhead trim.

3. Step 3: Install Center Support Beam

   Attach the center support beam (D) to the designated brackets on the headboard and footboard. Ensure it is centered and level. Tighten the bolts securely.
4. Pasul 4: Așezați șipcile de lemn

   Evenly space the wood slats (E) across the side rails and center support beam. Secure them in place using the provided fasteners or by pressing them into the pre-fitted slots. Ensure all slats are firmly seated to provide adequate mattress support.

5. Pasul 5: Strângerea finală

   Once all components are in place, go back and fully tighten all bolts and screws using the Allen wrench. Do not overtighten.

Instrucțiuni de operare

The HOSTACK King Bed Frame is designed for immediate use after proper assembly. Simply place your mattress directly onto the wood slats. No box spring is required.

• Asigurați-vă că salteaua este centrată pe cadru pentru a preveni deplasarea.
• The tall headboard provides comfortable backrest support for reading or watching television.
• The 5.2-inch clearance beneath the frame allows for easy access for robot vacuum cleaners.

Figure 3: Detail of the 55.1" deep diamond tufting headboard, designed for comfortable back support.

Figure 4: The 5.2-inch clearance under the bed frame facilitates easy cleaning with robot vacuum cleaners.

Întreţinere

Îngrijirea adecvată va prelungi durata de viață și aspectul cadrului patului dumneavoastră.

• curatenie: For the velvet upholstery, gently vacuum with a soft brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, a mild fabric cleaner designed for velvet can be used, testing on an inconspicuous area first.
• Verificare hardware: Periodically (every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaks.
• Evitați lumina directă a soarelui: Prolonged exposure to direct sunlight may cause the velvet fabric to fade.
• Distribuția greutății: Distribute weight evenly on the bed frame. Avoid standing or jumping on the bed.

Figure 5: Key design elements of the bed frame include a double nail design, handmade pleats, and a curved wingback headboard.

Depanare

If you encounter any issues with your bed frame, refer to the common problems and solutions below.

Specificații

• Marca: HOSTACK
• Model: Cadru de pat King
• Dimensiune: Rege
• Culoare: Negru
• Dimensiuni produs: 85.1 cm L x 81.5 cm l x 55.1 cm Î
• Material: Upholstered Velvet, Steel Frame, Wood Slats
• Capacitate de greutate: Până la 1200 de lire sterline
• Compatibilitate saltea: No Box Spring Required, Wood Slat Support
• Caracteristici speciale: Adjustable (implied by no box spring), Fade Resistant (fabric property), Squeak Resistant (EVA mute bars), Sturdy (steel frame, wood slats)
• Asamblare necesară: Da

Garanție și suport

For any questions, missing parts, or issues with your HOSTACK King Bed Frame, please contact our customer support team. We offer 7/24 service and are always ready to help you.

• Serviciu clienți: Please message us via "Contact Seller" on Amazon.
• POLITICA DE RETURNARE: 30-day return policy for refund/replacement.
• Planuri de protecție: Sunt disponibile pentru achiziționare planuri de protecție opționale pe 2 ani și 3 ani.