1. Introducere
Thank you for choosing PAUTIX 5V USB COB LED Strip Lights. This manual provides essential information for the safe and efficient use of your LED strip lights. Please read these instructions carefully before installation and operation.
Continutul pachetului:
- 1 x PAUTIX 5V USB COB LED Strip Light (6.56ft / 2m, 3000K Warm White)
- 1 x RF Wireless Remote Control
- 1 x USB Power Cable with In-line 3-button Dimmer
Image: Contents of the PAUTIX LED strip light package, showing the coiled strip, USB cable with in-line dimmer, and RF remote control.
2. Informații de siguranță
- Certificat UL: This product is UL-Listed, ensuring compliance with safety standards.
- Vol. Scăzuttage: Operates on 5V DC, making it safe to touch for pets and children.
- Numai pentru utilizare în interior: The LED strip has an IP30 rating and is designed exclusively for indoor environments. Avoid exposure to water or high humidity.
- Sursa de alimentare: Use only with a 5V/2A (or higher) USB power source. Insufficient power may cause flickering or improper operation.
- Instalare: Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance.
- Tăiere: The strip can be cut at designated marks (every 12mm/0.47in). Cutting at non-marked points will damage the circuit.
- Căldură: While COB LEDs produce minimal heat, ensure proper ventilation when installed in enclosed spaces.
3. Configurare și instalare
- Pregătiți suprafața: Clean the desired mounting surface thoroughly to remove dust, oil, or moisture. A clean, dry, and smooth surface ensures strong adhesion.
- Măsurați și tăiați (opțional): If a shorter length is required, measure the desired length and cut the LED strip only at the designated cutting marks (indicated by copper pads).
Image: Diagram showing the cuttable sections of the LED strip, marked every 12mm/0.47in, with a pair of scissors indicating where to cut.
- Suport adeziv detașabil: Carefully peel off the protective film from the 3M self-adhesive backing on the LED strip.
- Atașați banda: Press the LED strip firmly onto the prepared surface, ensuring even contact along its entire length.
Image: Four-step visual guide demonstrating how to install the LED strip: clean the surface, peel the backing, paste the strip, and turn on the light.
- Conectare alimentare: Plug the USB connector of the LED strip into a compatible 5V/2A (or higher) USB power source (e.g., TV USB port, computer, power bank, USB wall adapter).
Image: Various USB power sources compatible with the PAUTIX LED strip, including a USB charger, power bank, laptop/TV, 5V battery pack, and USB socket.
4. Instrucțiuni de utilizare
RF Wireless Remote Control:
The included RF remote control allows for convenient operation from a distance, even without direct line of sight (360° control). It features:
- Pornit/Oprit: Aprindeți sau stingeți luminile.
- Reglarea luminozității: Increase or decrease brightness (5 levels).
- Funcții cronometru: Set the lights to turn off automatically after 30 minutes, 1 hour, 2 hours, 3 hours, or 4 hours. Press 'C' to cancel the timer.
- Funcția de memorie: The lights will restore to their last brightness setting when turned back on.
Image: The PAUTIX LED strip light coiled with the RF wireless remote control and USB power cable visible. The remote shows buttons for power, brightness, and timer settings.
Image: A child sleeping with the LED strip lights providing soft illumination, illustrating the timer function of the RF remote control.
In-line 3-button Dimmer:
The USB power cable includes an in-line controller with three buttons for basic operation:
- Buton de alimentare: Turns the lights on/off.
- Brightness Up (+): Crește luminozitatea.
- Brightness Down (-): Scade luminozitatea.
Image: A living room scene with LED strip lights installed, showing the in-line dimmer and its buttons for adjusting brightness from 10% to 100%.
5. Întreținere
- curatenie: Gently wipe the LED strip with a dry, soft cloth if it accumulates dust. Do not use liquid cleaners or immerse in water.
- Adeziv: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface.
- Depozitare: When not in use for extended periods, store the LED strip in a cool, dry place, away from direct sunlight.
6. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Luminile nu se aprind. | Fără alimentare, conexiune slăbită, port USB defect. |
|
| Luminile pâlpâie. | Alimentare insuficientă. |
|
| Telecomanda nu funcționează. | Battery issue, interference. |
|
| Sections of the strip are not lighting up. | Damage to the strip. |
|
7. Specificații
- Model: RF-SWW320COB-USB-2M-3000K-NEW
- Marca: PAUTIX
- Tip sursă de lumină: LED COB
- Temperatura de culoare: 3000K alb cald
- Lungime: 6.56 de picioare (2 metri)
- LEDs per Meter: 320 LEDs/m (Total 640 LEDs)
- Voltage: 5 volți (DC)
- Wattage: 9.5 wați
- Flux luminos: 1200 lumeni
- Indicele de redare a culorilor (CRI): >90
- Caracteristici speciale: 5V USB Powered, RF Remote Control, UL-Listed, Dimmable, Dotless, Flicker-Free, Memory Function, Timer
- Durată de viaţă: >65,000 de ore
- Evaluare de protecție la pătrundere (IP): IP30 (doar pentru utilizare în interior)
- Material: 3M Adhesive, COB LED Light Source, Double Layer Pure Copper PCB, Plastic
- Lungimea cablului de alimentare: 2.6 picioare
- UPC: 717994811924
8. Garanție și asistență
PAUTIX is committed to customer satisfaction. This product comes with a 5 an garanție, asigurând calitatea și fiabilitatea.
If you encounter any issues or have questions regarding your PAUTIX LED Strip Lights, please contact our customer support team. We aim to respond within 24 hours and provide a prompt resolution.
Informații de contact: Please refer to the product packaging or the official PAUTIX website-ul pentru cele mai actualizate date de contact ale serviciului clienți.