1. Introducere
This manual provides comprehensive instructions for the proper use and maintenance of your LUCORB Gym Timer Remote Control. Please read this manual thoroughly before operating the device to ensure correct functionality and to prevent damage.
Notă de compatibilitate: This remote controller is specifically designed as a replacement for the LUCORB 15-inch large display wall-mounted gym timer. It is not compatible with other brands or models of gym timers. Please verify that your existing remote matches the images provided in this manual before use.
2. Informații de siguranță
- Nu expuneți telecomanda la apă și umiditate excesivă.
- Nu expuneți telecomanda la lumina directă a soarelui sau la temperaturi extreme.
- Use only AAA batteries as specified. Do not mix old and new batteries or different types of batteries.
- Aruncați bateriile uzate conform reglementărilor locale.
- Do not attempt to disassemble or repair the remote control yourself. Contact customer support if issues arise.
3. Conținutul pachetului
- 1 x LUCORB Gym Timer Remote Control
- Notă: Bateriile AAA nu sunt incluse și trebuie achiziționate separat.
4. Produs terminatview
The LUCORB Gym Timer Remote Control is designed for intuitive operation of your compatible gym timer. Its ergonomic design and clearly labeled buttons allow for quick and efficient control over various timer functions.

Figura 4.1: Înclinat view of the LUCORB Gym Timer Remote Control, showcasing designul său compact și dispunerea butoanelor.
Refer to the diagram below for a detailed layout of the remote control buttons and their corresponding functions.

Figure 4.2: Detailed diagram of the LUCORB Gym Timer Remote Control with each button clearly labeled for its function.
Funcțiile butoanelor
| Etichetă buton | Funcţie |
|---|---|
| ON/OFF (Red Power Button) | Powers the timer on or off. |
| DN | Mod numărătoare inversă. |
| UP | Count Up mode. |
| ST | Mod cronometru. |
| TA | TABATA interval timer mode. |
| HIIT | High-Intensity Interval Training mode. |
| FGB1 | Fight Gone Bad 1 interval timer mode. |
| FGB2 | Fight Gone Bad 2 interval timer mode. |
| anii 10 | Activates 10-second preparation time. |
| Pictograma notă muzicală | Adjusts optional tone type. |
| Pictogramă difuzor | Reglează volumul. |
| Pictogramă buclă | Activates Loop Countdown (EMOM). |
| Pictogramă Redare / Pauză | Starts, pauses, or resumes the timer. |
| Salt pictograma | Adjusts countdown time before the end. |
| Săgeată sus | Page Up / Increase value. |
| Săgeată în jos | Page Down / Decrease value. |
| Săgeata la stânga | Left Shift / Navigate left. |
| Săgeata dreapta | Right Shift / Navigate right. |
| OK | Confirms selection or setting. |
| Pictogramă creion | Edit function. |
| Pictograma Coș de gunoi | Delete function. |
| 1 P1 to 9 P9 | Programmable Plans (P1-P9) selection. |
| Pictograma ceas cu alarmă | Activates Alarm Clock settings. |
| 12/24H | Comută între formatul de 12 ore și cel de 24 de ore. |
| Pictogramă ceas | Accesses Time Clock settings. |
| Pictogramă Luminozitate | Reglează luminozitatea afișajului. |
5. Configurare
5.1 Instalarea bateriei
The remote control requires two (2) AAA batteries (not included) for operation.
- Localizați capacul compartimentului bateriei de pe spatele telecomenzii.
- Glisați capacul în jos sau apăsați zăvorul (dacă există) pentru a deschide compartimentul.
- Introduceți două baterii AAA, asigurându-vă că bornele pozitive (+) și negative (-) se aliniază corect cu marcajele din interiorul compartimentului.
- Puneți la loc capacul compartimentului bateriei până când se fixează în siguranță cu un clic.
After battery installation, the remote is ready to be used with your LUCORB 15-inch gym timer.

Figure 5.1: The remote control being used to operate a LUCORB gym timer, demonstrating its intended function.
6. Instrucțiuni de utilizare
Ensure the gym timer is powered on and within range of the remote control. Point the remote directly at the timer for optimal signal transmission.
6.1 Pornire/Oprire
- Apăsați tasta ON/OFF (red power) button to turn the gym timer on or off.
6.2 Adjusting Volume and Brightness
- Apăsați tasta Pictogramă difuzor button to cycle through volume levels or mute the timer.
- Apăsați tasta Pictogramă Luminozitate button to adjust the display brightness of the gym timer.
6.3 Moduri temporizator
Select the desired timer mode by pressing the corresponding button:
- DN (Countdown): Initiates a countdown from a set time. Use arrow keys to set time, then OK şi Redare/Pauză.
- UP (Count Up): Starts counting upwards from zero. Press Redare/Pauză to start/stop.
- ST (Stopwatch): Functions as a stopwatch. Press Redare/Pauză to start/stop.
- TA (TABATA): Activates the TABATA interval protocol (e.g., 20s work, 10s rest, 8 rounds).
- HIIT (High-Intensity Interval Training): Engages HIIT specific interval settings.
- FGB1 / FGB2 (Fight Gone Bad): Selects pre-programmed Fight Gone Bad interval routines.
6.4 Funcționare generală
- 10s: Press to add a 10-second preparation time before a workout begins.
- Music Note Icon: Cycles through available tone types for alerts and beeps.
- Loop Icon: Activates or deactivates the Loop Countdown (EMOM - Every Minute On the Minute) function.
- Play/Pause Icon: Starts, pauses, or resumes any active timer or program.
- Skip Icon: Adjusts the countdown time before the end of an interval or program.
- Arrow Keys (Up, Down, Left, Right): Used for navigation, adjusting values, or shifting between digits during setup.
- OK: Confirms selections or saves settings.
- Pencil Icon (Edit): Enters edit mode for modifying timer settings or programmable plans.
- Trash Can Icon (Delete): Deletes selected settings or programmable plans.
6.5 Programmable Plans (P1-P9)
- The buttons labeled 1 P1 prin 9 P9 allow you to select and activate pre-saved or custom programmable workout plans.
- To program a plan, enter edit mode using the Pictogramă creion, configure your desired intervals, and then save it to one of the P1-P9 slots using the OK buton.
6.6 Alarm Clock and Time Clock
- Apăsați tasta Pictograma ceas cu alarmă to access and set alarm functions on the gym timer.
- Apăsați tasta Pictogramă ceas la view or adjust the current time displayed on the gym timer.
- Utilizați 12/24H button to switch between 12-hour and 24-hour time formats.
7. Întreținere
7.1 Curățare
- Ștergeți telecomanda cu o lavetă moale și uscată.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface or internal components.
7.2 Înlocuirea bateriei
- If the remote control's range decreases or it becomes unresponsive, replace the batteries as described in Section 5.1.
- Înlocuiți întotdeauna ambele baterii în același timp.
8. Depanare
- Telecomanda nu răspunde:
- Verificați dacă bateriile sunt introduse corect și au suficientă încărcare. Înlocuiți-le dacă este necesar.
- Ensure there are no obstructions between the remote and the gym timer.
- Confirm the remote is pointed directly at the timer's receiver.
- Interval limitat:
- Înlocuiți bateriile cu altele noi.
- Ensure no strong light sources (like direct sunlight) are interfering with the infrared signal.
- Incorrect timer response:
- Verify that this remote is indeed for the LUCORB 15-inch gym timer and not another model or brand.
- Refer to your gym timer's specific instruction manual for detailed programming steps.
9. Specificații
- Marca: LUCORB
- Număr de model: 15
- Material: Plastic
- Culoare: Negru
- Dimensiuni produs: 5.5 x 1.6 x 0.6 inchi (13.97 x 4.06 x 1.52 cm)
- Greutatea articolului: 1.2 uncii (34 grame)
- Tip baterie: 2 x AAA (nu sunt incluse)
10. Garanție și asistență
For warranty information, technical support, or any inquiries regarding your LUCORB Gym Timer Remote Control, please contact LUCORB customer service through the official channels provided with your original product purchase or via the LUCORB brand store on Amazon.