Instrucțiuni importante de siguranță
Vă rugăm să citiți cu atenție toate instrucțiunile înainte de a începe instalarea. Nerespectarea acestor instrucțiuni poate duce la electrocutare, incendiu sau vătămări corporale.
- AVERTIZARE: Pentru a reduce riscul de electrocutare, asigurați-vă că electricitatea a fost oprită de la întrerupătorul de circuit sau la cutia de siguranțe înainte de a începe.
- Toate instalațiile electrice trebuie să fie în conformitate cu codurile electrice naționale și locale. Dacă nu sunteți familiarizat cu instalațiile electrice, consultați un electrician calificat.
- Ventilatorul trebuie montat la o distanță minimă de 2.1 metri (7 picioare) de la podea până la marginea posterioară a palelor.
- Ensure the outlet box is securely attached to the building structure and can support the fan's weight (at least 35 lbs / 15.9 kg).
- Nu folosiți ventilatorul cu palele deteriorate. Înlocuiți toate palele dacă una este deteriorată.
- Nu introduceți obiecte în traiectoria palelor ventilatorului.
Conținutul pachetului
Despachetați cu grijă ventilatorul și inspectați conținutul. Ar trebui să aveți următoarele articole:
- Ansamblu Carcasa Motorului
- Pale ventilator (3)
- Suporturi pentru lame
- Asamblare Downrod
- Suport de fixare
- Ansamblu kit lumină
- Telecomanda cu suport de perete
- Pachet de accesorii (șuruburi, șaibe, piulițe de sârmă)
- Manual de instructiuni

Figure 1: addlon 80-inch 3 Wood Blades Ceiling Fan with Light. This image shows the complete fan assembly, including the motor housing, three wood blades, and the integrated light kit.
Configurare și instalare
Follow these steps to properly install your addlon ceiling fan. Ensure power is OFF at the circuit breaker before proceeding.
- Instalare suport de montare: Secure the mounting bracket to the ceiling outlet box using the screws provided. Ensure the bracket is firmly attached to a structural beam or a fan-rated outlet box.
- Ansamblu tijă: Insert the downrod through the canopy and coupling cover. Feed the motor wires through the downrod. Secure the downrod to the motor housing with the provided pin and screws.
- Agățarea ventilatorului: Carefully lift the fan assembly and place the downrod ball into the mounting bracket opening. Ensure the tab on the mounting bracket aligns with the slot on the downrod ball.
- Conexiuni electrice: Connect the fan's electrical wires to the house wiring according to the wiring diagram in this manual (typically black to black, white to white, and green/bare copper to ground). Use the provided wire nuts and ensure all connections are secure.
- Atașarea lamei: Atașați fiecare paletă a ventilatorului la suportul său folosind șuruburile furnizate. Apoi, atașați suporturile paletelor la carcasa motorului. Asigurați-vă că toate șuruburile sunt strânse bine.
- Instalare kit de lumină: Connect the light kit wires to the fan motor wires (usually blue to blue, white to white). Secure the light kit assembly to the bottom of the fan motor housing. Install the light cover.
- Împerecherea telecomenzii: Once installation is complete and power is restored, follow the remote control pairing instructions provided in the remote control section to synchronize the remote with your fan.
Instrucțiuni de operare
Your addlon ceiling fan is operated by the included remote control. Ensure the remote has fresh batteries installed (2x AAA, not included).
- Ventilator PORNIT/OPRIT: Apăsați tasta VENTILATOR PORNIT/OPRIT butonul pentru a porni sau opri ventilatorul.
- Controlul vitezei ventilatorului: Utilizați VITEZĂ buttons (usually marked with fan icons or numbers) to cycle through different fan speeds (e.g., Low, Medium, High).
- Lumină ON/OFF: Apăsați tasta LUMINĂ PORNIRE/OPRIRE butonul pentru a aprinde sau stinge lumina.
- Diminuarea intensității luminii: If your light kit supports dimming, press and hold the APRINDE button to adjust the brightness. Release when the desired brightness is reached.
- Funcția inversă: Apăsați tasta VERSO button to change the direction of the fan blades. This is useful for seasonal comfort (downward airflow for cooling in summer, upward airflow for circulating warm air in winter). Allow the fan to stop completely before reversing direction.
- Funcția de cronometru: Some models include a timer function. Press the TIMER button (e.g., 1H, 2H, 4H) to set the fan to turn off automatically after a set period.
Note: The remote control may need to be paired with the fan upon initial setup or after power outages. Refer to the remote control's specific instructions for pairing procedures.
Întreţinere
Regular maintenance ensures the longevity and optimal performance of your addlon ceiling fan. Always turn off power at the circuit breaker before performing any maintenance.
- curatenie: Folosiți un moale, damp cloth to clean the fan blades and motor housing. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Îngrijirea lamei: Verificați periodic strângerea șuruburilor lamei. Șuruburile slăbite pot provoca oscilații și zgomot.
- Înlocuire bec: If the light bulb needs replacement, ensure the power is off. Allow the bulb to cool before removing. Replace with a bulb of the same type and wattage as specified in the light kit instructions.
- Verificare anuală: Annually, check all connections and screws for tightness. There is no need to lubricate the fan motor as it has permanently lubricated bearings.
Depanare
Before contacting customer support, try these troubleshooting steps for common issues:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Ventilatorul nu pornește | No power to the fan; Loose wire connections; Remote control not paired or dead batteries. | Check circuit breaker; Verify all wire connections; Replace remote batteries and re-pair remote. |
| Lumina nu funcționează | Conexiune slăbită a firului; Bec defect; Problemă cu telecomanda. | Check light kit wiring; Replace bulb; Check remote batteries and pairing. |
| Ventilatorul se clătină | Șuruburi ale lamei slăbite; Lame dezechilibrate; Suport de montare slăbit. | Tighten all blade screws; Use a balancing kit (not included) to balance blades; Ensure mounting bracket is secure. |
| Funcționare zgomotoasă | Șuruburi slăbite; Bâzâit motor; Lamele lovesc un obstrucție. | Verificați și strângeți toate șuruburile; Asigurați-vă că niciun fir nu se freacă de carcasa motorului; Verificați dacă lamele nu sunt obstrucționate. |
Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | addlon |
| Model | 80-inch 3 Wood Blades Ceiling Fan with Light |
| Stil | Modern |
| Tip de cameră | Dormitor, living |
| Tip controler | Telecomanda |
| Material | Wood (Blades) |
| Numărul de lame | 3 |
| Metoda de control | Telecomanda |
| UPC | 850056663090 |
| ASIN | B0CHJKZ5GD |
Garanție și asistență pentru clienți
addlon products are manufactured to the highest quality standards and are warranted against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, replacement parts, or general inquiries, please contact addlon customer support:
- Website: addlon Official Store on Amazon
- E-mail: support@addlon.com (placeholder email, as none provided)
- Telefon: 1-800-XXX-XXXX (placeholder phone, as none provided)
Please have your model number (80-inch 3 Wood Blades Ceiling Fan with Light) and purchase date available when contacting support.