DAKASON 4FT Vapor Tight LED Light with Motion Sensor Instruction Manual

1. Introducere

Thank you for choosing the DAKASON 4FT Vapor Tight LED Light with Motion Sensor. This fixture is designed for durability and efficiency in challenging environments. It features adjustable wattage, an IP65 waterproof rating, and integrated motion and daylight sensors for optimized energy consumption.

This manual provides essential information for the safe installation, operation, and maintenance of your LED light fixture. Please read it thoroughly before installation and keep it for future reference.

2. Informații de siguranță

AVERTIZARE: Risc de electrocutare. Deconectați alimentarea înainte de instalare sau service.
Instalarea trebuie efectuată de către un electrician calificat, în conformitate cu toate codurile electrice naționale și locale.
Asigurați voltage is compatible with the fixture's requirements (100-277V AC).
Do not handle live wires. Always use appropriate personal protective equipment.
Nu modificați dispozitivul de fixare și nu îl utilizați în alte scopuri decât cele prevăzute.
Țineți materialele inflamabile departe de dispozitiv în timpul funcționării.
This fixture is rated IP65 for dust and water jet protection. Ensure all connections are properly sealed during installation to maintain this rating.

3. Conținutul pachetului

Verificați dacă toate componentele sunt prezente și nedeteriorate înainte de a continua instalarea.

1 x DAKASON 4FT Vapor Tight LED Light Fixture
2 x V-hooks
2 x suporturi de montare
4 x Plastic Wall Plugs
4 x șuruburi
4 x garnituri

Image showing all included mounting hardware: V-hooks, mounting brackets, plastic wall plugs, screws, and gaskets.

Figure 3.1: Included Mounting Kit and Components

4. Specificații

Marca	DAKASON
Numele modelului	Lumină LED etanșă la vapori
Numărul de model	P4-54A-50
Dimensiune	4FT (47.2 inci)
Wattage	Adjustable: 40W / 50W / 60W
Luminozitate	Până la 6600 lumeni (la 60W)
Eficienţă	110 lumeni pe watt
Voltage	100-277V AC
Temperatura de culoare	5000 Kelvin (alb rece)
Evaluare IP	IP65 (Waterproof, Dust-tight)
Material	Polycarbonate (PC) housing and lens
Caracteristici speciale	Dimmable, Motion Sensor, Photocell (Daylight Sensor), Wattage Reglabil
Tip de montare	Ceiling Mount / Wall Mount (Surface Mount)
Certificari	Listat UL
Durată de viaţă	50,000 de ore
Dimensiunile produsului	47.2 cm L x 3.74 cm l x 3.38 cm Î
Greutatea articolului	4.74 lire sterline

5. Configurare și instalare

Before beginning installation, ensure the power supply is turned off at the circuit breaker. This fixture is designed for surface mounting on ceilings or walls.

5.1. Montarea dispozitivului de fixare

Pregătiți suprafața de montare: Choose a suitable location for the fixture. Mark the drilling points for the mounting brackets using the fixture as a guide.
Instalați suporturi de montare: Drill pilot holes at the marked locations. Insert the plastic wall plugs (if needed for drywall/masonry) and secure the mounting brackets to the surface using the provided screws. Ensure the brackets are firmly attached.
Asigurați dispozitivul: Carefully align the fixture with the installed mounting brackets and secure it in place. The fixture can be clipped into the brackets.

Diagram showing the components of the vapor tight light fixture including stainless steel clips, mounting bracket, waterproof cable gland, reliable driver, and PC lens & housing.

Figure 5.1: Fixture Components and Mounting Points

A person installing the DAKASON LED light fixture in a garage, with the mounting brackets and screws visible.

Figura 5.2: Example of Fixture Installation

5.2. Cablaje electrice

Ensure power is OFF before wiring. The fixture is designed for 100-277V AC input. Connect the supply wires to the fixture's internal wiring terminals:

Conectați Live (negru) wire from the power supply to the fixture's Live terminal.
Conectați Neutru (alb) wire from the power supply to the fixture's Neutral terminal.
Conectați Ground (Green/Bare Copper) wire from the power supply to the fixture's Ground terminal.

Use the waterproof cable gland to ensure a sealed entry point for the wiring, maintaining the IP65 rating.

Close-up of the LED driver inside the fixture, showing input and output wiring terminals.

Figure 5.3: Internal Wiring and Driver

6. Operare și setări

The DAKASON LED Vapor Tight Light features adjustable wattage and intelligent sensor controls. These settings are configured using dip switches located inside the fixture.

6.1. Wattage Ajustare

The fixture allows you to select between three wattage outputs: 40W, 50W, and 60W. This adjusts the light output (lumens) accordingly.

40W: Aproximativ 4400 de lumeni
50W: Aproximativ 5500 de lumeni
60W: Aproximativ 6600 de lumeni

Pentru a regla wattage, localizează cetage selection switch inside the fixture and set it to your desired output. Ensure power is disconnected before making adjustments.

Image showing a workshop setting with three different light levels corresponding to 40W, 50W, and 60W, and a close-up of the wattage comutator de selecție.

Figura 6.1: Wattage Options and Selection

6.2. Motion Sensor Settings

The integrated motion sensor allows for automatic lighting control based on presence. Settings are configured via dip switches.

Close-up of the dip switch panel for motion sensor settings, showing options for sensitivity, hold time, daylight sensor, stand-by period, stand-by dimming level, and sensor mode.

Figure 6.2: Motion Sensor Dip Switch Panel

Refer to the diagram on the fixture's sensor module for specific dip switch positions. Key settings include:

Sensibilitate de detectare: Adjusts how easily the sensor detects motion (e.g., 50% or 100%).
Timp de așteptare: The duration the light stays at 100% brightness after motion is detected and then ceases (e.g., 5s, 90s, 5min, 10min).
Perioada de așteptare: The duration the light remains at a dimmed level after the hold time expires and before turning completely off (e.g., 0s, 10s, 15min, +∞ for always on at dim level).
Nivel de atenuare în stand-by: The brightness level during the stand-by period (e.g., 20% or 30%).
Modul senzor: Allows enabling or disabling the motion sensor function entirely.

Example of Motion Sensor Logic:

Six-panel diagram illustrating the motion sensor's behavior at a train station: light off with sufficient daylight, dims to 20% with low ambient light, 100% with motion, stays on for hold time, dims to standby, then off when ambient light is high.

Figure 6.3: Motion Sensor Operation Flow

6.3. Daylight Sensor (Photocell)

The daylight sensor (photocell) automatically controls the light based on ambient light levels, saving energy during daylight hours.

Daylight Priority Technology: The sensor will turn on the light fixture when ambient light is below 50 Lux (dusk), even without motion.
When ambient light is above 50 Lux (dawn), the sensor will switch off the light fixture, even if motion is detected.
The daylight sensor function can be disabled via a dip switch if not required.

Image showing a building exterior at dusk and dawn, illustrating how the daylight sensor automatically turns the lights on when ambient light is low and off when it's high.

Figure 6.4: Daylight Sensor Auto On/Off

7. Întreținere

The DAKASON LED Vapor Tight Light is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.

curatenie: Deconectați alimentarea înainte de curățare. Ștergeți dispozitivul cu o lavetă moale șiamp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate housing and lens.
Inspecţie: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure the stainless-steel hasps and clips are securely fastened to maintain the vapor-tight seal.
LED-uri: The LEDs are maintenance-free and have a lifespan of 50,000 hours. They are not user-replaceable.

8. Depanare

If you encounter issues with your DAKASON LED Vapor Tight Light, refer to the following common problems and solutions:

Problemă	Cauza posibila	Soluţie
Lumina nu se aprinde.	No power supply; incorrect wiring; sensor disabled or misconfigured; ambient light too high.	Check circuit breaker and wiring connections. Verify sensor settings (Daylight Sensor, Sensor Mode). Ensure ambient light is below 50 Lux if Daylight Sensor is enabled.
Light stays on continuously or for too long.	Motion sensor Hold Time or Stand-by Period set too long or to infinite (+∞); constant motion in detection area; sensor malfunction.	Adjust Hold Time and Stand-by Period dip switches. Ensure no continuous motion is triggering the sensor. If issue persists, contact support.
Light turns on/off too frequently or is too sensitive.	Motion sensor sensitivity set too high; environmental factors (e.g., small animals, moving objects, vibrations).	Reduce the Detection Sensitivity setting on the dip switch. Consider the mounting location to minimize false triggers.
Lumina pâlpâie.	Incompatible dimmer switch (this fixture is not designed for external dimmers); power supply instability; rare individual sensitivity to LED refresh rates.	Ensure no external dimmer switches are used. Check power supply stability. While most users do not perceive flicker, some individuals may be more sensitive to the inherent refresh rate of LED lighting.
Lumina nu este suficient de puternică.	Wattage setting is too low; Stand-by Dimming Level is active.	Reglați wat-ultage selection switch to a higher setting (e.g., 60W). Check motion sensor settings to ensure the light is not in a dimmed stand-by state.

9. Garanție și asistență

The DAKASON LED Vapor Tight Light is backed by a 5 an garanție, ensuring its quality and performance. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact DAKASON customer support. Provide your purchase details and model number (P4-54A-50) when contacting support to expedite assistance.

You can typically find contact information for the seller or manufacturer through your purchase platform or the DAKASON official website-ul.

DAKASON P4-54A-50

DAKASON 4FT Vapor Tight LED Light with Motion Sensor