VisionTechShop TVP-12B Price Computing Scale and LP-50 Thermal Label Printer User Manual

Introducere

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your VisionTechShop TVP-12B Price Computing Scale and LP-50 Thermal Label Printer. Please read this manual thoroughly before operating the device to ensure proper function and longevity.

Figure 1: VisionTechShop TVP-12B Price Computing Scale with LP-50 Thermal Label Printer and labels.

Înființat

1. Despachetarea

Carefully unpack all components from the box. Ensure you have the TVP scale, DLP-50 printer, and the case of LST8060 labels (12 rolls).

2. Conexiune la alimentare

1. Connect the 12V/500mA adapter to the TVP scale. The port is located on the underside of the scale.
2. Connect the 12V/2.5A adapter to the DLP-50 printer.
3. Plug both adapters into a suitable power outlet. A red light will illuminate on the front of the scale, indicating it is receiving power. A green light will appear on the printer.

3. Conexiune cablu de interfață

Connect the interface cable between the DLP-50 printer and the TVP scale. The connection port for the printer is labeled 'LABEL PRINTER' and for the scale, it is on the underside.

4. Pornirea inițială

Turn on the scale using the switch located on the right front side of the bottom of the scale. The display will cycle through numbers and then settle at 0.00.

Instrucțiuni de operare

1. Changing Measurement Units (Lb/Oz/Kg)

To change the measurement unit, press the UNITATE key. The display will cycle through kilograms (kg), pounds (lb), and ounces (oz). Select your desired unit.

2. Using the Accumulation Function

The accumulation function allows you to sum the total price of multiple items. Follow these steps:

1. Power on the TVP scale while holding down the TARĂ key. Continue holding until 'Pn' appears on the screen.
2. Introdu codul 0000 și apăsați TARĂ a intra.
3. Presa TARĂ din nou.
4. Utilizați M+ or PLU buttons to navigate until the weight display reads 'F11'.
5. Presa TARĂ to enter the setting. The 'Unit Price' display should read 'nodE'.
6. Presa PLU until the 'Unit Price' reads 'EP50'.
7. Presa M+ to go back, then press TARĂ a salva.
8. Apăsați tasta ZERO key repeatedly to exit to the main menu.
9. Place the first item on the scale and enter its unit price.
10. Presa M+ to accumulate the price.
11. Remove the first item, place the second item, enter its unit price, and press M+ again. Repeat for all items.
12. Presa CH la view the accumulated total price.

3. Creating PLU Profiles

To save frequently used prices as PLU (Price Look-Up) profiles:

1. Enter the desired unit price using the numeric keypad.
2. Țineți PLU key for 3 seconds until 'SAVE PoS' appears on the screen.
3. Enter a PLU number (0-9) where you want to save the price. For example, press '1' for PLU 1. The screen will show 'SAVEd'.
4. To recall a saved PLU, place an item on the scale, press PLU, and then the corresponding PLU number.
5. Presa M+ to print a label with the PLU information.

4. Turning On the Backlight

To activate the display backlight:

1. Power on the TVP scale.
2. Țineți apăsat '.' (decimal) key until the backlight setting opens. The display will show '6LSEE' and 'OFF' or 'ON' or 'AUTO'.
3. Utilizați M+ or PLU button to cycle through 'OFF', 'ON', or 'AUTO'. 'AUTO' mode saves power by turning on the backlight only when the scale is in use.
4. Presa TARĂ pentru a salva selecția.

5. Using the Give Change Function

To calculate change for a customer:

1. Place the item on the scale and enter its unit price.
2. Presa M+ to add the item to the total.
3. Presa CH la view the total price.
4. Enter the amount the customer paid using the numeric keypad. The 'Total Price' display will show the change due.
5. Presa TARĂ to clear the transaction and exit.

6. Imprimarea etichetelor

After weighing an item and entering its unit price, press the M+ key to print a label. The printer will generate a label with sales information including weight, unit price, and total price. Note: The printer does not print barcodes. It prints text such as "THANK YOU", "Total Weight", "Price per lb and Total Price". If the total price is 0.00, no label will be printed. The total price must be greater than 0.00 to print a label.

Întreţinere

Curatenie

The TVP-12B scale features a stainless steel removable platter for easy cleaning. Regularly clean the platter and the scale body with a damp cloth. Avoid using abrasive cleaners or submerging the unit in water.

Figure 2: TVP-12B Scale with its protective dust cover.

Protecţie

A dust cover is included to protect the scale from dust and spills when not in use. Always use the dust cover to prolong the life of your scale.

Depanare

Printer Not Printing Labels

• Ensure the total price displayed on the scale is greater than 0.00. The printer will not issue a label if the total price is zero.
• Check if the printer is properly connected to the scale via the interface cable and that its power adapter is securely plugged in and the printer is turned on (green light).
• Verify that the label roll is correctly installed and not jammed.

Specificații

Figure 3: Dimensions of the TVP-12B Price Computing Scale.

Figure 4: NTEP Certificate of Conformance for TVP Series scales.

Sprijin

For technical support or any inquiries regarding your VisionTechShop product, please contact us:

• Telefon: +1.201.970.8897
• E-mail: GoUSApos@Gmail.com
• Website: www.VisionTechShop.com
• Adresa: 100 Temple Ave. Hackensack, NJ 07601