Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler Instruction Manual

Introducere

This manual provides detailed instructions for the installation, operation, and maintenance of your Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler. This all-in-one (AIO) water cooling system is designed to deliver efficient thermal performance for your CPU, featuring a dual-chamber pump, pre-installed SickleFlow 120 Edge fans, and Addressable Gen 2 RGB lighting.

The MasterLiquid Atmos 360 is compatible with a wide range of Intel LGA (1700/1200/1151/1150/1155/1156) and AMD (AM5/AM4) sockets.

Image: The Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler, showcasing its radiator, three RGB fans, and illuminated pump head.

Conținutul pachetului

Înainte de a începe instalarea, vă rugăm să verificați dacă toate componentele sunt prezente în pachet:

• 360mm Radiator with pre-installed SickleFlow 120 Edge Fans
• CPU Water Block/Pump Unit
• Mounting Hardware for Intel LGA 1700/1200/115x sockets
• Mounting Hardware for AMD AM5/AM4 sockets
• Pasta termica
• ARGB Gen 2 Controller (if included)
• Various Cables (PWM fan cables, ARGB cables)
• Manual de utilizare

Imagine: O imagine cuprinzătoare view of all included components for the MasterLiquid Atmos 360, including the radiator, fans, pump, mounting brackets, and accessories.

Configurare și instalare

Follow these steps carefully to install your liquid cooler. Refer to your motherboard and PC case manuals for specific guidance on component placement and cable routing.

1. Pregătiți soclul procesorului

• Identificați tipul de soclu al procesorului (Intel LGA sau AMD AM).
• Install the appropriate backplate (for Intel) or retention clips (for AMD) as per the included hardware guide.
• Clean the CPU surface with isopropyl alcohol to remove any residue.

2. Aplicați pasta termică

• Apply a small, pea-sized amount of the included thermal paste to the center of your CPU's integrated heat spreader (IHS).
• Do not spread the paste manually; the pressure from the cold plate will distribute it evenly.

3. Instalați radiatorul și ventilatoarele

• Determine the optimal mounting location for the 360mm radiator in your PC case (typically top or front).
• Secure the radiator to the case using the provided screws. The SickleFlow Edge fans are pre-installed on the radiator for convenience.

4. Montați pompa/placa de răcire

• Attach the correct mounting brackets to the pump unit for your CPU socket.
• Carefully place the pump/cold plate assembly onto the CPU, aligning the mounting holes.
• Secure the pump unit with the appropriate screws, tightening them in a diagonal pattern until snug. Do not overtighten.

5. Conectați cablurile

• Connect the pump's 3-pin power cable to an available CPU_FAN or AIO_PUMP header on your motherboard.
• Connect the PWM fan cables from the SickleFlow Edge fans to the CPU_FAN or other available fan headers on your motherboard. It is recommended to connect them to a single header using a splitter if necessary, to ensure synchronized fan speed control.
• Connect the ARGB cables from the pump and fans to an Addressable Gen 2 RGB header on your motherboard (5V-D-G) or to the included ARGB controller.

Image: The assembled MasterLiquid Atmos 360, showing the radiator, fans, and pump unit connected by tubing.

Instrucțiuni de operare

Pornirea inițială

After installation, power on your system. The pump and fans should begin operating. Monitor your CPU temperatures using system monitoring software to ensure proper function.

Controlul iluminării RGB

The MasterLiquid Atmos 360 features Addressable Gen 2 RGB lighting on both the pump and fans. You can control the lighting effects through several methods:

• Sincronizarea plăcii de bază: If connected to a compatible ARGB motherboard header, use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting.
• Controler ARGB inclus: If an ARGB controller is included, use its physical buttons to cycle through pre-set lighting modes and colors.
• Cooler Master MasterCTRL/MasterPlus Software: Download and install Cooler Master's MasterCTRL or MasterPlus software for advanced customization of lighting effects and device performance.

Imagine: O imagine detaliată view of the MasterLiquid Atmos pump head, showcasing its unique design and customizable RGB illumination.

Controlul vitezei ventilatorului

The SickleFlow Edge fans are PWM (Pulse Width Modulation) controlled. Their speed can be managed via your motherboard's BIOS/UEFI settings or through motherboard-specific software. Adjust fan curves to balance cooling performance and noise levels according to your preferences.

Întreţinere

Întreținerea regulată ajută la asigurarea performanței optime și a longevității răcitorului de lichid.

• Curățare de praf: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• Inspecție vizuală: Verificați ocazional tuburile și conexiunile pentru a depista orice semne de scurgeri sau deteriorări. Deși coolerele AIO sunt sisteme etanșe, o verificare vizuală rapidă poate preveni potențialele probleme.
• Actualizări de software: Keep your Cooler Master MasterCTRL/MasterPlus software and motherboard BIOS/UEFI updated to ensure compatibility and access to the latest features and performance optimizations.

Depanare

If you encounter issues with your MasterLiquid Atmos 360, refer to the following common troubleshooting steps:

Temperaturi ridicate ale procesorului

• Check Pump Connection: Ensure the pump's power cable is securely connected to the correct motherboard header (CPU_FAN or AIO_PUMP) and receiving power.
• Verificați funcționarea ventilatorului: Confirm that all radiator fans are spinning. Check their connections to the motherboard or fan controller.
• Pastă termică: Ensure thermal paste was applied correctly and the cold plate has good contact with the CPU. Re-apply if necessary.
• Flux de aer: Check your PC case's overall airflow. Ensure radiator fans are oriented correctly for intake or exhaust as desired.

Iluminarea RGB nu funcționează

• Conexiune ARGB: Verify that the ARGB cables are correctly connected to a 5V-D-G header on your motherboard or the ARGB controller. Ensure it is not connected to a 12V RGB header, which can damage the LEDs.
• Software: Check your motherboard's RGB software or Cooler Master's MasterCTRL/MasterPlus software for lighting settings. Ensure the lighting is enabled and configured.
• Putere controler: If using an external ARGB controller, ensure it is receiving power (usually via SATA power connector).

Zgomot neobișnuit al pompei

• Bule de aer: New AIOs may have some air bubbles that can cause gurgling noises initially. These usually dissipate within a few hours of operation. Gently tilt your PC case to help move air bubbles to the radiator.
• Montare: Asigurați-vă că pompa este montată în siguranță și nu vibrează față de alte componente.

If problems persist, please contact Cooler Master customer support.

Specificații

Informații despre garanție

The Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler comes with a 5 ani garanție de la data achiziției. Această garanție acoperă defectele de materiale și de fabricație în condiții normale de utilizare.

For warranty claims or detailed terms and conditions, please retain your proof of purchase and visit the official Cooler Master website-ul sau contactați serviciul de asistență pentru clienți.

Sprijin

For further assistance, technical support, or to download the latest software and drivers, please visit the official Cooler Master website:

www.coolermaster.com

You may also find helpful resources, FAQs, and community forums on their support pages.