1. Introducere
This instruction manual provides detailed guidance for the installation, setup, and operation of your Einaus 2-Channel Universal Wireless Radio Receiver. This device is designed for wireless control of various electrical appliances, including heaters, ventilation systems, air conditioners, pumps, barriers, lighting, multi-channel electric doors and windows, electronic locks, garage doors, lifting equipment, and industrial automation systems. Please read this manual thoroughly before use to ensure proper function and safety.
2. Conținutul pachetului
La deschiderea pachetului, ar trebui să găsiți următoarele componente:
- 1 x Receiver module with protective casing
- 2 x Remote controls (each with battery installed)
Dacă lipsesc sau sunt deteriorate componente, vă rugăm să contactați serviciul de asistență pentru clienți.
3. Specificații
| Parametru | Valoare |
|---|---|
| Tip comutator | Remote control relay output |
| Canale | 2 canale |
| Vol. De operaretage | DC 12-48V |
| Frecvența de operare | 433 MHz |
| Sensibilitatea recepției | > -104 dBm |
| Curentul maxim de funcționare | 10 A |
| Temperatura de operare | -20 °C până la 65 °C |
| Tip conector | Terminal cu șurub |
| Material de contact | Cupru |
| Tip de contact | Normal deschis (NO) / Normal închis (NC) |
| Tip de montare | Montare la suprafață |
| Putere nominală | 12 wați |
| Coil Voltage | 12 volți (DC) |
| Vol. comutare minimătage | 12 volți (DC) |
| Numărul de terminale | 2 |
| Conformitate | CE |
4. Produs terminatview
5. Configurare și asociere
5.1. Ștergerea codurilor existente
Pentru a șterge toate telecomenzile asociate anterior din memoria receptorului:
- Localizați Butonul de învățare on the receiver board.
- Țineți apăsat butonul Butonul de învățare until the indicator light turns off. This indicates that all stored codes have been successfully cleared.
5.2. Pairing a Remote Control (Learning Mode)
To pair a new remote control with the receiver:
- Apăsați tasta Butonul de învățare on the receiver once. The indicator light will flash once and then turn off. This signifies the receiver is ready to learn a new code in Momentary mode.
- Immediately press any button on your remote control. The indicator light on the receiver will flash to confirm successful pairing.
- Repeat for additional remote controls if needed.
6. Moduri de operare
The receiver supports several operating modes, which determine how the relay responds to remote control input. You can set the desired mode by pressing the Butonul de mod on the receiver board a specific number of times.
6.1. Mod Momentar
In Momentary mode, the relay activates only as long as the remote control button is pressed. ReleasinButonul dezactivează releul.
- Setare: Apăsați tasta Butonul de mod once. The indicator will flash once and turn off.
6.2. Latch Mode
In Latch mode, one button press activates the relay, and another distinct button press is required to deactivate it.
- Setare: Apăsați tasta Butonul de mod twice. The indicator will flash twice and turn off.
6.3. Comutați în modul
In Toggle mode, a single button press activates the relay, and pressing the same button again deactivates it. It acts like a flip-flop switch.
- Setare: Apăsați tasta Butonul de mod three times. The indicator will flash three times and turn off.
6.4. 5-Second Delay Mode
This mode activates the relay for a fixed duration of 5 seconds after a button press, then automatically deactivates it.
- Setare: Apăsați tasta Butonul de mod four times. The indicator will flash four times and turn off.
7. Diagrame de cablare
The following diagrams illustrate common wiring configurations for the Einaus 2-Channel Universal Wireless Radio Receiver. Always ensure power is disconnected before making any wiring changes.
8. Întreținere
The Einaus Wireless Radio Receiver is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:
- curatenie: Keep the receiver free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents.
- Mediu: Ensure the receiver is installed in a dry environment, away from direct moisture, extreme temperatures, and corrosive substances.
- Alimentare electrică: Utilizați o sursă de alimentare stabilă în volumul specificattage (DC 12-48V).
- Baterii pentru telecomandă: Replace remote control batteries when their range decreases or they stop responding.
9. Depanare
If you encounter issues with your receiver, refer to the following troubleshooting steps:
- Receptorul nu răspunde:
- Check the power supply to the receiver. Ensure it is within the 12-48V DC range and properly connected.
- Verificați dacă bateriile telecomenzii nu sunt descărcate.
- Ensure the remote control is paired correctly. Try re-pairing the remote control (refer to Section 5.2).
- Check for strong radio interference in the vicinity.
- Rază scurtă de operare:
- Înlocuiți bateriile telecomenzii.
- Ensure there are no significant obstructions (thick walls, metal structures) between the remote and the receiver.
- Avoid installing the receiver near large metal objects or other radio-emitting devices.
- Relay Not Activating/Deactivating:
- Check the wiring to the load. Ensure connections are secure and correct according to the wiring diagrams (Section 7).
- Verify the operating mode is set as intended (Section 6).
- Ensure the load current does not exceed the maximum 10A rating.
Dacă problema persistă după parcurgerea acestor pași, vă rugăm să contactați serviciul de asistență pentru clienți.
10. Garanție și asistență
This Einaus product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
