BSIDE A5X Automatic Digital Multimeter

1. Introducere

The BSIDE A5X is a versatile and intelligent automatic digital multimeter designed for precise electrical measurements. Featuring a vibrant EBTN color LCD, it provides clear readings including test values, analog bars, and frequency/temperature. This device is equipped with smart auto-ranging capabilities, making it user-friendly for both beginners and experienced professionals. Its rechargeable lithium battery ensures long-lasting performance, and robust safety features provide protection against overload and burnout.

1.1. Ce se află în cutie

• BSIDE A5X Rechargeable Multimeter
• Cabluri de testare (roșu și negru)
• Protective EVA Case
• Thermocouple (Temperature Probe)
• Cablu de încărcare de tip C
• Manual de utilizare (engleză)

Figure 1.1: BSIDE A5X Multimeter with included test leads, charging cable, thermocouple, and protective case.

2. Informații de siguranță

Please read and understand all safety warnings and operating instructions before using this multimeter. Failure to do so may result in injury or damage to the meter or equipment under test.

• Always ensure the test leads are properly connected and the function selected is appropriate for the measurement.
• Nu depășiți valorile maxime de intrare specificate pentru fiecare interval.
• Procedați cu mare precauție atunci când lucrați cu circuite electrice sub tensiune.
• Do not use the meter if it appears damaged or if the test leads are frayed.
• Replace the fuse only with the specified type and rating.
• Țineți mâinile și degetele în spatele barierelor sondei în timpul măsurătorilor.
• Evitați utilizarea contorului în medii umede sau în timpul furtunilor cu descărcări electrice.

3. Configurare

3.1. Încărcarea bateriei

The BSIDE A5X is equipped with a built-in 700mAh rechargeable lithium-ion battery. Before first use, or when the low battery indicator appears, charge the device using the provided Type-C charging cable.

1. Conectați capătul de tip C al cablului de încărcare la portul de încărcare al multimetrului.
2. Conectați capătul USB-A al cablului la un adaptor de alimentare USB standard (nu este inclus) sau la un port USB al computerului.
3. The charging indicator on the multimeter will show the charging status. Once fully charged, the indicator will change or turn off.

Figure 3.1: The BSIDE A5X Multimeter features a built-in rechargeable 700mAh Li-ion battery, eliminating concerns about power depletion.

3.2. Pornirea inițială

Apăsați și mențineți apăsat butonul de pornire (⏻) to turn on the multimeter. The device will typically start in Smart Mode, automatically detecting the measurement type.

4. Instrucțiuni de utilizare

The BSIDE A5X features an intelligent auto-identification system that simplifies measurements. In Smart Mode, it automatically detects and measures AC/DC voltage, AC/DC current, resistance, continuity, and frequency. For other functions, use the dedicated buttons.

4.1. Smart Mode Operation

When powered on, the multimeter defaults to Smart Mode. Simply connect the test leads to the circuit or component, and the meter will automatically identify and display the measurement (Voltage, Current, Resistance, Continuity, or Frequency).

4.2. Măsurarea tensiunii AC/DCtage

In Smart Mode, the meter automatically measures AC or DC voltage. Connect the red test lead to the 'VΩHz' input jack and the black test lead to the 'COM' input jack. Place the probes across the circuit points to measure voltage.

Figure 4.1: The BSIDE A5X Multimeter automatically measures AC voltage, displaying both the voltage value and frequency.

4.3. Măsurarea curentului alternativ/continuu

For current measurements, the A5X features smart identification. Plug the test leads into the appropriate current input port (600mA for current measurements) and the 'COM' port. The tester will automatically switch to AC/DC ampere test mode.

Figure 4.2: The BSIDE A5X Multimeter features Amp Smart Identification; simply plug into the amp port, and the tester automatically switches to AC/DC ampere test mode.

4.4. Măsurarea rezistenței

In Smart Mode, connect the test leads across the resistor. The meter will automatically detect and display the resistance value.

4.5. Măsurarea capacității

To measure capacitance, press the 'FUNC' button until the capacitance symbol (μF) appears on the display. Important: Always discharge the capacitor before measuring to prevent damage to the meter or injury. Conectați sondele de testare la bornele condensatorului.

Figure 4.3: Capacitance Test. Always discharge the capacitor before measuring to ensure safety and accurate readings.

4.6. Measuring Frequency and Duty Cycle

In Smart Mode, frequency is automatically displayed when measuring AC voltage. For dedicated frequency or duty cycle measurements, press the 'FUNC' button to cycle through modes until the Hz or % symbol appears. Connect the test leads to the signal source.

4.7. Măsurarea temperaturii

Connect the provided thermocouple to the multimeter's input jacks (ensure correct polarity). Press the 'FUNC' button until the temperature symbol (°C or °F) appears. Place the thermocouple probe at the point where temperature needs to be measured. The A5X can display both thermometer temperature and ambient environment temperature.

Figure 4.4: Dual-Way Temperature Test. The multimeter can measure both thermometer temperature (0°C~1000°C) and environment temperature (0°C~50°C).

4.8. Testul diodelor

Press the 'FUNC' button to select the diode test mode. Connect the red test lead to the anode and the black test lead to the cathode of the diode. The display will show the forward voltage drop. For a good silicon diode, this is typically around 0.5V to 0.8V. An open circuit (OL) indicates a faulty diode or incorrect polarity.

4.9. Test de continuitate

In Smart Mode, continuity is automatically detected. Alternatively, press the 'FUNC' button to select continuity mode. Connect the test leads across the circuit or component. If the resistance is below approximately 30Ω, the meter will emit an audible beep, indicating continuity.

4.10. Vol. fără contacttage (NCV) Detectie

Funcția NCV permite detectarea volumului de curent alternativtage without direct contact. Press the 'V-Alert' button to activate NCV mode. Move the top tip of the multimeter near the conductor. The meter will indicate the presence of AC voltage through visual and audible alerts. The A5X offers high and low sensitivity settings for NCV detection.

4.11. VFC (Variable Frequency Control) Test

The VFC function is designed to measure the output voltage of variable frequency drives (VFDs) or inverters. Press the 'FUNC' button to select VFC mode. Connect the test leads to the output of the VFD. This mode provides accurate readings for non-sinusoidal waveforms.

Figure 4.5: The VFD function allows the BSIDE A5X Multimeter to accurately measure the output voltage of inverters.

4.12. Testarea circuitelor auto

The BSIDE A5X can be used for various automotive electrical tests, such as checking battery voltage, alternator output, and continuity in wiring. Ensure the vehicle's electrical system is off before connecting test leads for continuity or resistance checks. For voltage checks, connect leads to the appropriate points (e.g., battery terminals).

Figure 4.6: The BSIDE A5X Multimeter is suitable for various automotive circuit tests, including battery voltage verificări.

5. Întreținere

5.1. Curatenie

Ștergeți suprafața contoruluiasing cu anunțamp cloth and mild detergent. Do not use abrasives or solvents. Ensure the meter is off and disconnected from any circuits before cleaning.

5.2. Îngrijirea bateriei

To prolong battery life, avoid fully discharging the battery frequently. Recharge the battery when the low battery indicator appears. If storing the meter for an extended period, charge it periodically to maintain battery health.

5.3. Înlocuirea siguranței

The BSIDE A5X is equipped with an easy-to-replace fuse for overload protection. If the current measurement function stops working, the fuse may need replacement. Refer to the specifications for the correct fuse type and rating. Disconnect all test leads and power off the meter before attempting fuse replacement.

6. Depanare

• Fără afișaj/contorul nu pornește: Check battery charge level. Ensure the power button is pressed and held sufficiently.
• Citiri incorecte: Verify test lead connections. Ensure the correct measurement function is selected (if not in Smart Mode). Check for damaged test leads.
• Fără măsurare a curentului: Check the fuse. Ensure test leads are connected to the correct current input jack.
• Semnalul sonor de continuitate nu funcționează: Ensure continuity mode is selected. Check if the resistance is above the threshold (approx. 30Ω).
• NCV nu detectează: Ensure NCV mode is active. Check for proper proximity to the AC voltage sursa.

7. Specificații

8. Garanție și asistență

BSIDE products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BSIDE website. Vă rugăm să păstrați dovada achiziției pentru orice reclamații în garanție.