Introducere
This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN 2-in-1 Bathroom Exhaust Fan with Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Informații importante privind siguranța
Respectați întotdeauna măsurile de siguranță de bază atunci când instalați, utilizați sau întrețineți aparate electrice. Nerespectarea acestei reguli poate duce la incendiu, electrocutare sau vătămare corporală.
- Disconnect power at the service panel before wiring or servicing this unit.
- Toate instalațiile electrice trebuie să respecte codurile și standardele electrice locale.
- Această unitate este concepută exclusiv pentru uz general de ventilație. Nu o utilizați pentru evacuarea de materiale și vapori periculoși sau explozivi.
- To reduce the risk of fire or electrical shock, do not expose this unit to water or moisture.
- Asigurați-vă împământarea corespunzătoare pentru a preveni șocurile electrice.
- Nu instalați într-o zonă de gătit.
- Purtați întotdeauna ochelari de protecție și mănuși în timpul instalării.
Produs terminatview și Caracteristici
The OREiN 2-in-1 Bathroom Exhaust Fan with Light is designed to provide efficient ventilation and illumination for your bathroom. It features a quiet operation and selectable color temperature LED lighting.
The OREiN 2-in-1 Bathroom Exhaust Fan with Light, showcasing its integrated design and the three selectable light color temperatures (3000K, 4000K, 5000K) at the bottom.
Diagram illustrating the premium materials and components, including the heavy-duty housing, powerful motor, easy installation bracket, and energy-efficient LED light.
Visual comparison demonstrating the powerful 100 CFM airflow, showing a bathroom before and after the fan effectively removes steam and humidity.
Un explodat view of the energy-efficient and quiet DC motor, highlighting its design for ultra-quiet operation at 1.5 sones.
Caracteristici cheie:
- Performanță ridicată: Operates at 100 CFM (Cubic Feet Per Minute) for effective moisture and odor removal.
- Funcționare silențioasă: Rated at 1.5 Sones for minimal noise disruption.
- Lumină LED integrată: Bright 1000lm LED light illuminates your bathroom.
- 3CCT Selectable Lighting: Choose between 3000K (soft white), 4000K (bright white), or 5000K (daylight) color temperatures.
- Nightlight Funcția: Includes a 2200K nightlight for low-level illumination in the dark.
- Construcție durabilă: Equipped with high-quality components and a DC motor for long-lasting performance.
- Instalare ușoară: Designed with a fast bracket for secure and straightforward installation between ceiling joists.
- Certificari: FCC and ETL Listed for reliability and safety.
Specificații
Detailed diagram showing the product dimensions, including the light cover size (10.1" x 10.1"), housing dimensions (7.68" x 7.55" x 6.42"), and recommended ceiling opening size (8.11" x 7.48").
An infographic summarizing key product specifications such as material, exhaust volume, sound level, power consumption, and color temperature options.
| Caietul de sarcini | Valoare |
|---|---|
| Numele modelului | OL17001-3CCT |
| Capacitatea fluxului de aer | 100 CFM |
| Nivel de zgomot | 1.5 Sunete |
| Wattage | 25W (Fan) + 10W (Light) |
| Ieșire de lumină | 1000lm |
| Temperatura de culoare | 3000K/4000K/5000K Selectable, 2200K Nightlight |
| Dimensiuni carcasă (L x l x Î) | 7.68 cm x 7.55 cm x 6.42 cm |
| Light Cover Size | 10.1 cm x 10.1 cm |
| Ceiling Opening Size | 8.11 cm x 7.48 cm |
| Voltage | 120 volți |
| Sursa de alimentare | AC |
| Tip de instalare | Spălați montura |
| Certificari | FCC, ETL Listed |
Configurare și instalare
Before beginning installation, ensure all necessary tools and materials are available. Always disconnect power at the circuit breaker before starting any electrical work.
Unelte și materiale (nu sunt incluse):
- Șurubelniță (Phillips și Flathead)
- Dispozitive de dezimbrare
- Burghiu
- Bandă de măsurare
- Cuțit utilitar sau ferăstrău pentru gips-carton
- Duct Tape or Clamps
- Ochelari de protecție și mănuși
Pașii de instalare:
- Pregătiți deschiderea: Ensure the ceiling opening is 8.11" x 7.48". If replacing an existing fan, remove the old unit.
- Montați carcasa: The fan comes with a fast bracket for secure installation. Mount the bathroom fan light combo between ceiling joists using the fast bracket, or nail/screw it directly to the joist. The housing dimensions are 7.68" x 7.55" x 6.42".
- Conectarea conductelor: Connect the appropriate ductwork (not included) to the fan's exhaust port. Ensure the duct does not bend into the opening to block the damper. Secure with duct tape or clamppentru a preveni scurgerile de aer.
- Cablaj: Follow the wiring diagrams provided below. Ensure all connections are secure and comply with local electrical codes. This unit requires a 120V AC power source.
- Instalați capacul lămpii: Once wiring is complete and tested, attach the light cover (10.1'' x 10.1'') to the fan housing.
Detailed wiring diagrams for the OREiN bathroom fan, showing configurations for a single switch controlling both fan and light, and separate switches for fan and light. Includes a warning about duct obstruction.
Instrucțiuni de operare
Your OREiN Bathroom Exhaust Fan with Light is designed for simple operation. The fan and light functions are typically controlled by wall switches (purchased separately).
Funcționarea ventilatorului:
- Turn on the wall switch connected to the fan to activate the exhaust fan.
- The fan operates at 100 CFM to effectively remove moisture and odors from the bathroom.
- Note: The fan may take a few seconds to start up. This slow start mechanism is designed to protect the DC motor and extend its lifespan.
Light Operation (3CCT Selectable & Nightlight):
Visual representation of the three selectable color temperatures: 5000K (daylight), 4000K (bright white), and 3000K (soft white).
An illustration detailing the 3CCT (3000K/4000K/5000K) and nightlight (2200K) features, including the wattage și fluxul luminos.
- Selecting Color Temperature (CCT): Before installation, locate the toggle switch on the back of the bathroom fan housing. Slide this switch to preset your desired LED color temperature: 3000K (soft white), 4000K (bright white), or 5000K (daylight). This setting is fixed once installed unless the unit is accessed again.
- Activating Nightlight: To switch to the 2200K nightlight mode, cycle the light switch (On-Off-On) within 2 seconds. This rapid cycling will toggle between the main light and the nightlight mode.
Întreţinere
Regular maintenance helps ensure optimal performance and extends the lifespan of your exhaust fan. Always disconnect power at the circuit breaker before performing any maintenance.
Cleaning the Light Cover:
- Carefully remove the light cover from the fan housing.
- Wipe the cover with a soft, damp cloth. Use mild soap if necessary.
- Nu folosiți agenți de curățare abrazivi sau solvenți, deoarece acestea pot deteriora finisajul.
- Ensure the cover is completely dry before reattaching.
Cleaning the Fan Housing and Motor:
- With the power off, gently vacuum or wipe away any dust or debris from the fan blades and interior of the housing.
- Do not spray water directly into the motor or electrical components.
- Asigurați-vă că toate componentele sunt uscate înainte de a reporni alimentarea cu energie electrică.
Depanare
If you experience issues with your OREiN Bathroom Exhaust Fan with Light, refer to the following common problems and solutions. If the problem persists, contact customer support.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Ventilatorul nu pornește. | Fără alimentare la unitate. Conexiunea cablajului slab. Întrerupător de perete defect. | Verificați întrerupătorul de circuit și asigurați-vă că există curent. Verificați dacă toate conexiunile cablurilor sunt fixe (cu alimentarea întreruptă). Testați sau înlocuiți întrerupătorul de perete. |
| Lumina nu se aprinde. | Fără alimentare la unitate. Conexiunea cablajului slab. Întrerupător de perete defect. | Verificați întrerupătorul de circuit și asigurați-vă că există curent. Verificați dacă toate conexiunile cablurilor sunt fixe (cu alimentarea întreruptă). Testați sau înlocuiți întrerupătorul de perete. |
| Ventilatorul este zgomotos. | Ductwork obstruction or improper installation. Montare slăbită. Resturi în palele ventilatorului. | Check ductwork for kinks or blockages. Ensure damper is not obstructed. Verify the fan housing is securely mounted to the joists. Disconnect power and clean fan blades. |
| Poor ventilation/humidity remains. | Obstrucția conductelor. Ventilatorul nu este suficient de mare pentru cameră. Air leaks in ductwork. | Check ductwork for blockages or kinks. Ensure the fan's CFM rating is appropriate for your bathroom size. Seal all duct connections with appropriate tape. |
| Light color temperature is incorrect. | CCT toggle switch set incorrectly. Accidental nightlight activation. | Ensure the CCT toggle switch on the fan housing is set to your desired temperature (requires accessing the unit). Cycle the light switch (On-Off-On within 2 seconds) to toggle between main light and nightlight mode. |
Informații despre garanție
OREiN products are manufactured to high-quality standards and are warranted to be free from defects in materials and workmanship. Specific warranty terms and duration may vary. Please retain your proof of purchase for warranty claims.
For detailed warranty information or to initiate a warranty claim, please contact OREiN customer support using the information provided in the Support section.
Asistență pentru clienți
For any questions, technical assistance, or support regarding your OREiN Bathroom Exhaust Fan with Light, please contact our customer service team.
- Asistență telefonică: 1(844)506-1530 (24-Hour Service)
- Suport online: Contact us directly on Amazon or search for 'OREiN' online to find our official website and contact options.
- Returnări: While returns can be processed through Amazon's logistics, we encourage you to contact us first for assistance with any issues before initiating a return.
Image showing a customer service representative and the 24-hour service phone number for support.