1. Introducere
Thank you for choosing the Smartwares FSM-12601 Wi-Fi Smoke Detector. This device is designed to provide early warning of smoke and fire, enhancing the safety of your home. Featuring a photoelectric sensor, it offers high sensitivity to detect slow-smoldering fires while minimizing false alarms. With Wi-Fi connectivity, you can receive real-time alerts on your smartphone via the Connected at Home or Smartlife app.
Image: The Smartwares FSM-12601 Wi-Fi Smoke Detector in a home setting.
2. Informații importante privind siguranța
- Citiți cu atenție toate instrucțiunile înainte de instalare și utilizare.
- Acest detector de fum este conceput pentru uz rezidențial.
- Do not paint the smoke detector. Paint can clog the sensing chambers and prevent the alarm from functioning correctly.
- Do not install in areas with high humidity, excessive dust, or near cooking fumes.
- Regularly test the smoke detector as described in this manual.
- În caz de alarmă, evacuați imediat incinta și apelați serviciile de urgență.
3. Conținutul pachetului
Asigurați-vă că toate articolele sunt prezente în colet:
- Smartwares FSM-12601 Wi-Fi Smoke Detector
- Suport de montare
- baterie CR123A
- Șuruburi de montare și dibluri de perete
- Manual de utilizare
4. Produs terminatview
The Smartwares FSM-12601 features a compact design with a central test/mute button and an integrated LED indicator.
Imagine: față view of the smoke detector highlighting the Test/Mute button.
- Buton Test/Mute: Apăsați pentru a testa alarma sau pentru a dezactiva o alarmă falsă.
- Indicator LED: Provides visual status of the device (e.g., normal operation, alarm, low battery, pairing mode).
- Vorbitor: Emite un sunet de alarmă de 85 dB.
Image: Dimensions and key features of the smoke detector.
5. Configurare și instalare
5.1 Instalarea bateriei
- Gently twist the back cover of the smoke detector counter-clockwise to open it.
- Insert the provided CR123A battery, ensuring correct polarity (+/-).
- Închideți capacul din spate rotindu-l în sensul acelor de ceasornic până când se fixează în poziție cu un clic.
Image: Battery compartment and instructions to open the device.
5.2 Locul de montare
For optimal performance, install the smoke detector on the ceiling in the center of a room or hallway. If ceiling mounting is not possible, install it on a wall, at least 10-30 cm (4-12 inches) from the ceiling. Avoid corners. Install at least one smoke detector on each floor of your home, including basements and attics.
- Avoid installing near windows, doors, or ventilation openings where drafts might interfere with smoke detection.
- Keep away from cooking appliances, fireplaces, and areas with high humidity like bathrooms.
5.3 Instalare fizică
- Alegeți o locație de montare potrivită.
- Use the mounting bracket as a template to mark the drill holes on the ceiling or wall.
- Faceți găurile și introduceți dopurile de perete.
- Atașați suportul de montare folosind șuruburile furnizate.
- Align the smoke detector with the mounting bracket and twist it clockwise until it locks securely into place.
5.4 App Connection (Wi-Fi Pairing)
To enable Wi-Fi features and receive smartphone notifications, connect your smoke detector to the Smartwares "Connected at Home" or "Smartlife" app.
- Download the "Connected at Home" or "Smartlife" app from your smartphone's app store (available for iOS and Android).
- Înregistrați-vă sau conectați-vă la contul dvs.
- Long press the Test/Mute button on the smoke detector until the red LED indicator starts flashing. This indicates pairing mode.
- Follow the on-screen instructions within the app to add the smoke detector to your Wi-Fi network.
- Once successfully paired, the LED indicator will stop flashing and remain off, or indicate normal operation as per app instructions.
Image: Steps for connecting the smoke detector to the app.
Image: Benefits of connecting the smoke detector to the app.
6. Instrucțiuni de utilizare
6.1 Funcționare normală
Once installed and connected, the smoke detector is in normal operating mode. The LED indicator will flash briefly every 40-60 seconds to confirm it is functioning correctly.
6.2 Testing the Smoke Detector
It is recommended to test your smoke detector weekly to ensure proper functionality.
- Press and hold the Test/Mute button for a few seconds.
- The alarm will sound loudly (85 dB), and the LED indicator will flash rapidly.
- Eliberați butonul. Alarma ar trebui să se oprească.
- Dacă alarma nu sună, consultați secțiunea Depanare.
6.3 Mute Function (Hush Mode)
In case of a non-emergency alarm (e.g., cooking fumes), you can temporarily silence the alarm.
- Press the Test/Mute button briefly during an alarm.
- The alarm will silence for approximately 10 minutes. The LED will continue to flash every few seconds to indicate it is in hush mode.
- După 10 minute, dacă încă mai este fum, alarma se va reactiva.
- If the smoke has cleared, the detector will return to normal operation.
6.4 Stare indicator LED
- Flashes every 40-60 seconds: Funcționare normală.
- Flashes rapidly with alarm sound: Fum detectat.
- Flashes every few seconds (no alarm): Hush mode active.
- Flashes every 32 seconds (with chirp): Low battery warning. Replace battery immediately.
- Flashes rapidly (during setup): Mod de asociere.
7. Întreținere
7.1 Înlocuirea bateriei
The smoke detector operates on a CR123A battery with an approximate lifespan of one year. When the battery is low, the device will chirp every 32 seconds, and the LED will flash.
- Rotiți detectorul de fum în sens invers acelor de ceasornic pentru a-l scoate din suportul de montare.
- Open the back cover by twisting it counter-clockwise.
- Remove the old CR123A battery and dispose of it according to local regulations.
- Insert a new CR123A battery, observing correct polarity.
- Close the back cover and reattach the detector to its mounting bracket.
- Test the smoke detector immediately after replacing the battery.
7.2 Cleaning the Smoke Detector
Dust and debris can affect the performance of your smoke detector. Clean it at least once a month.
- Remove the smoke detector from its mounting bracket.
- Use a soft brush or a vacuum cleaner with a soft brush attachment to gently clean the exterior casing and the openings around the sensor.
- Do not use water, cleaning solvents, or harsh chemicals.
- Reattach the detector and test it.
8. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Alarma nu sună în timpul testului. | Dead or low battery; incorrect battery installation; faulty unit. | Replace battery; check battery polarity; if problem persists, contact support. |
| Alarme false frecvente. | Detector is too close to cooking fumes, steam, or high humidity; excessive dust. | Relocate detector further from sources of false alarms; clean the detector. |
| Chirping sound every 32 seconds. | Avertizare baterie descărcată. | Înlocuiți imediat bateria CR123A. |
| Cannot connect to Wi-Fi app. | Incorrect Wi-Fi password; detector too far from router; incorrect pairing procedure; app issues. | Ensure correct Wi-Fi password; move detector closer to router; repeat pairing steps carefully; check app for updates or known issues. |
| Fără notificări pe smartphone. | App notifications disabled; detector disconnected from Wi-Fi; app not running in background. | Check app notification settings; verify detector's Wi-Fi connection; ensure app is allowed to run in background. |
9. Specificatii tehnice
| Numărul de model | FSM-12601 |
| Tip senzor | Fotoelectric |
| Volumul alarmei | 85 dB la 3 metri |
| Sursa de alimentare | 1x CR123A Lithium battery (included) |
| Durata de viață a bateriei | Aproximativ 1 an |
| Conectivitate | Wi-Fi (2.4 GHz) |
| Umiditatea de funcționare | Până la 95% fără condensare |
| Dimensiuni (L x l x H) | 7.6 x 7.6 x 2.8 cm |
| Greutate | 84 de grame |
| Material | Plastic ABS |
10. Informații privind eliminarea
Do not dispose of the device or batteries with household waste. Electronic waste and batteries should be collected separately for environmentally sound disposal. Use the return and collection systems available in your country.
11. Garanție și asistență
Smartwares products come with a standard manufacturer's warranty. For detailed warranty terms, technical support, or service inquiries, please refer to the contact information provided on the Smartwares website-ul sau documentația originală de achiziție.