XPG Levante X 360 All-in-One ARGB CPU Liquid Cooler

1. Introducere

The XPG Levante X 360 is an All-in-One (AIO) ARGB CPU Liquid Cooler designed to provide efficient and reliable thermal management for high-performance CPUs. This cooler features a 360mm radiator equipped with three 120mm Fluid Dynamic Bearing (FDB) ARGB fans and an Asetek-powered pump, ensuring optimal heat dissipation and quiet operation. This manual provides essential information for the proper installation, operation, and maintenance of your XPG Levante X 360 liquid cooler.

Image 1.1: XPG Levante X 360 All-in-One ARGB CPU Liquid Cooler. This image displays the complete liquid cooler unit, including the 360mm radiator, three 120mm ARGB fans, and the pump/cold plate assembly with braided tubing.

2. Conținutul pachetului

Verify that all components are present and in good condition before proceeding with installation.

• XPG Levante X 360 CPU Liquid Cooler (Radiator, Pump, Tubing, 3x 120mm ARGB Fans)
• Mounting Bracket Kit for Intel (LGA 1700, 1200, 115X, 2066, 2011-3, 2011)
• Mounting Bracket Kit for AMD (AM5, AM4, TR4)
• Șuruburi ventilator și șuruburi radiator
• ARGB Controller/Cables
• Pastă termică (preaplicată sau într-un tub)
• Manual de utilizare (acest document)

Image 2.1: Package contents. This image shows the radiator with fans, pump, various mounting brackets, screws, and cables included in the box.

3. Informații de siguranță

Please read and understand the following safety precautions before installing or operating the XPG Levante X 360 liquid cooler.

• Deconectare de la curent: Deconectați întotdeauna alimentarea de la computer înainte de a efectua orice instalare sau întreținere.
• Descărcare electrostatică (ESD): Take precautions against ESD by grounding yourself before handling components.
• Manipularea lichidelor: While the cooler is a sealed unit, handle it with care to prevent damage to the tubing or radiator, which could lead to leaks.
• Margini ascuțite: Be aware of sharp edges on computer cases and cooler components during installation.
• Ventilare: Ensure adequate airflow within your computer case for optimal cooling performance.
• Compatibilitate: Verify compatibility with your CPU socket and computer case before installation.

4. Configurare și instalare

The XPG Levante X 360 is designed for hassle-free installation. Follow these steps carefully for proper setup.

4.1 Pregătiți-vă sistemul

1. Opriți computerul și deconectați toate cablurile.
2. Deschideți carcasa computerului pentru a accesa placa de bază și zona procesorului.
3. Îndepărtați orice cooler CPU existent. Curățați bine suprafața procesorului pentru a îndepărta pasta termică veche.

4.2 Instalați hardware-ul de montare

Select the appropriate mounting bracket for your CPU socket (Intel or AMD). The cooler supports LGA 1700, 1200, 115X, 2066, 2011-3, 2011 for Intel, and AM5, AM4, TR4 for AMD.

1. Attach the correct backplate to the rear of your motherboard (for Intel sockets). AMD AM4/AM5 typically uses the stock backplate.
2. Secure the standoffs to the motherboard through the CPU cooler mounting holes.
3. Attach the chosen CPU bracket to the pump head.

Image 4.1: Key features highlighting support for LGA 1700 and AM5 sockets, along with low noise fan, aluminum radiator, high quality low noise pump, and hassle-free installation.

4.3 Mount the Radiator and Fans

Determine the optimal mounting location for the 360mm radiator within your case (e.g., front, top).

1. If not pre-attached, mount the three 120mm ARGB fans to the radiator using the provided fan screws. Ensure correct airflow direction (intake or exhaust) based on your case's ventilation strategy.
2. Secure the radiator assembly to your chosen mounting location in the PC case using the longer radiator screws.

4.4 Install the Pump Head

Carefully place the pump head onto the CPU, aligning the mounting holes with the standoffs.

1. If thermal paste is not pre-applied, apply a small pea-sized amount to the center of the CPU's integrated heat spreader (IHS).
2. Place the pump head onto the CPU, ensuring even contact.
3. Tighten the thumbscrews or nuts in a diagonal pattern until snug. Do not overtighten.

4.5 Conectarea cablurilor

Connect the pump and fan cables to your motherboard or ARGB controller.

• Connect the pump's 3-pin or 4-pin power cable to the motherboard's CPU_FAN or AIO_PUMP header.
• Connect the 4-pin PWM fan cables from the three 120mm fans to available fan headers on your motherboard or to a fan hub/controller.
• Connect the ARGB cables from the fans and pump head to an ARGB header on your motherboard (5V 3-pin) or to the included ARGB controller.

Image 4.2: The XPG Levante X 360 cooler installed inside a computer case, showcasing the illuminated pump head and ARGB fans.

5. Instrucțiuni de utilizare

Once installed, the XPG Levante X 360 operates automatically to cool your CPU.

• Pornire inițială: After installation, power on your computer. The pump and fans should start operating. Check for any unusual noises or leaks.
• Controlul ventilatorului și pompei: The 4-pin PWM fans and pump allow for speed control via your motherboard's BIOS/UEFI settings or dedicated software. Adjust fan curves to balance cooling performance and noise levels.
• Iluminare ARGB: The Addressable RGB (ARGB) lighting on the fans and pump head can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) or through the included ARGB controller.

Imaginea 5.1: Un prim-plan view of the XPG Levante X 360's ARGB fans and pump, illustrating the vibrant lighting effects.

6. Întreținere

Întreținerea regulată ajută la asigurarea performanței optime și a longevității răcitorului de lichid.

• Îndepărtarea prafului: Curățați periodic praful de pe aripioarele radiatorului și palele ventilatorului folosind aer comprimat sau o perie moale. Excesul de praf poate împiedica circulația aerului și poate reduce eficiența răcirii.
• Inspectați tubulatura: Occasionally check the tubing for any signs of kinks, cracks, or leaks.
• Funcționarea ventilatorului: Ensure all fans are spinning freely and quietly. Replace any fans that become excessively noisy or stop functioning.
• Funcționarea pompei: Listen for any unusual noises from the pump. A properly functioning pump should operate quietly.

7. Depanare

If you encounter issues with your XPG Levante X 360, refer to the following common problems and solutions.

8. Specificații

Detailed technical specifications for the XPG Levante X 360 All-in-One ARGB CPU Liquid Cooler.

• Model: LEVANTEX360-BKCWW
• Cooler Type: All-in-One Liquid CPU Cooler
• Radiator Size: 360mm
• Dimensiune ventilator: 120 mm (x3)
• Tip ventilator: ARGB Fluid Dynamic Bearing (FDB) Fans
• Conector ventilator: 4-Pin PWM
• Viteza maxima de rotatie: 2000 RPM
• Capacitatea fluxului de aer: 61.5 de picioare cubi pe minut (CFM)
• Nivel de zgomot: 18.17 de decibeli (dBA)
• Tip pompă: Asetek-powered High-Performance Pump
• Pompă Voltage: 12 volți
• Metoda de racire: Lichid
• Material: Aluminum (Radiator), Copper (Cold Plate)
• Compatible CPU Sockets:
  • Intel: LGA 1700, 1200, 115X, 2066, 2011-3, 2011
  • AMD: AM5, AM4, TR4
• Dimensiuni produs (pachet): 18.9 x 5.91 x 7.48 inci
• Greutatea articolului: 4.71 lire sterline
• UPC: 842243029062
• Producător: Adata

Image 8.1: Graph illustrating the relationship between PWM duty cycle, fan speed (RPM), fan air flow (CFM), and fan noise (dBA) for the XPG Hurricane 120 ARGB PWM fans.

9. Garanție și asistență

XPG products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official XPG website-ul lor sau contactați serviciul de asistență pentru clienți. Păstrați dovada achiziției pentru solicitările de garanție.

Official XPG Website: www.xpg.com