ROCKBROS 27210001001-CBR/1

ROCKBROS Foldable Bike Stand Instruction Manual

Model: 27210001001-CBR/1

1. Produs terminatview

The ROCKBROS Foldable Bike Stand is designed to provide stable and convenient parking for bicycles with wheel sizes ranging from 20 to 29 inches. It accommodates various bike types, including road bikes, mountain bikes, and kids' bikes. Its foldable design allows for easy storage and portability, making it suitable for indoor, outdoor, and garage use.

Key features include a wide base for enhanced stability, silicone non-slip pads, and a simple push-in mechanism for securing the bike without lifting.

ROCKBROS Foldable Bike Stand with a road bike, showing its stable design.

Image: The ROCKBROS Foldable Bike Stand securely holding a road bike, highlighting its wide and stable base.

ROCKBROS Foldable Bike Stand with text 'FIT 20”-29” BIKES FOLDING BIKE STAND RACK'.

Image: The bike stand is compatible with 20-29 inch bikes, emphasizing its folding design.

2. Instrucțiuni de configurare

The ROCKBROS Foldable Bike Stand is designed for quick and easy setup. It arrives pre-assembled and requires minimal effort to prepare for use.

2.1 Unfolding the Stand

  1. Place the folded stand on a flat, stable surface.
  2. Locate the folding mechanism button.
  3. Press the button and gently pull the frame outwards to extend the stand.
  4. Ensure the stand is fully extended and locked into its open position before use.
Four-step visual guide showing how to fold and unfold the ROCKBROS bike stand.

Image: Visual instructions for folding the bike stand. To unfold, reverse these steps: 1. Push the frame, 2. Pull the little button, 3. Fold the frame (unfold), 4. Frame folding finish (stand is open).

2.2 Plasamentul inițial

Position the stand on a level surface where you intend to park your bicycle. The integrated silicone non-slip pads on the base help prevent movement and protect your floor.

Video: This video demonstrates the ROCKBROS Foldable Bike Stand in use, including its setup and how a bike is placed into it.

3. Instrucțiuni de utilizare

3.1 Parking Your Bicycle

To park your bike, simply push either the front or rear wheel into the stand's recess. The stand's design allows the bike to settle securely without needing to lift it. The spring-loaded mechanism will adjust to hold the wheel firmly in place.

3.2 Bike Compatibility

The stand is compatible with a wide range of bicycle wheel sizes and types:

  • Diametru roată: 20 inci la 29 inci.
  • Bike Types: Road bikes (650C-700C), Mountain bikes (26"-29"), Kids' bikes (20"-24").
  • Maximum Tire Width: Up to 2.4 inches.
Diagram showing compatibility for road bike tires and mountain bike tires, with various wheel sizes (24, 26, 29 inches, and 700C).

Image: This diagram illustrates the stand's compatibility with different tire types and wheel sizes, including road bikes, mountain bikes, and various diameters.

4. Întreținere

The ROCKBROS Foldable Bike Stand is constructed from durable iron with a protective paint finish to resist rust and scratches, ensuring a long service life. Minimal maintenance is required.

  • curatenie: Ștergeți suportul cu reclamăamp o lavetă pentru a îndepărta praful și murdăria. Evitați produsele de curățare abrazive care ar putea deteriora finisajul.
  • Inspecţie: Verificați periodic toate piesele mobile și conexiunile pentru a vă asigura că sunt fixate.
  • Depozitare: When not in use, fold the stand for compact storage to protect it from environmental elements, especially if stored outdoors.

5. Depanare

5.1 Stand Instability

If the stand appears unstable:

  • Asigurați-vă că suportul este așezat pe o suprafață complet plană și nivelată.
  • Verify that the stand is fully unfolded and locked into its open position.
  • Check that all four silicone non-slip pads are present and making full contact with the ground.
  • Confirm the bicycle wheel is fully inserted into the parking recess.

5.2 Tire Fit Issues

If your bike tire does not fit correctly or is not held securely:

  • Confirm your tire width does not exceed the maximum recommended 2.4 inches.
  • Ensure the wheel is centered within the stand's groove.
  • For minor unevenness that may occur during transport, the frame can often be gently corrected by hand.

5.3 Damaged Plastic Parts

In the event of damaged plastic components, please contact customer support for assistance.

6. Specificații

Numărul de model27210001001-CBR/1
CuloareNegru
MaterialFier
Greutatea articolului6 de lire sterline (2.72 kg)
Dimensiuni pliate (L x l x H)17.7 x 15.7 x 3.1 inci
Suitable Wheel Diameter20 - 29 inci
Lățimea maximă a anvelopei2.4 inci
Asamblare necesarăNo (Pre-assembled, only unfolding required)
Tip de finisareIron, Silicone
Image displaying key specifications of the ROCKBROS bike stand, including color, material, weight, dimensions, and suitable bike sizes.

Image: A visual summary of the product specifications, including color, material, weight, dimensions, and compatible bike wheel sizes.

7. Garanție și asistență

ROCKBROS is committed to customer satisfaction. If you encounter any issues with your bike stand, particularly regarding manufacturing defects or damaged components, please contact our customer service team.

For support, please refer to the contact information provided with your purchase or visit the official ROCKBROS website. During transportation, minor frame unevenness may occur; this can often be corrected by the user. For significant issues or damaged plastic parts, direct assistance is available.

© 2023 ROCKBROS. Toate drepturile rezervate.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.