Yato YT-84995 43cc Gasoline Brush Cutter

1. Instrucțiuni importante de siguranță

Read all safety warnings and instructions carefully before operating this brush cutter. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

Siguranța generală

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, long pants, and sturdy footwear.
• Do not operate the brush cutter when tired, under the influence of drugs, alcohol, or medication.
• Țineți trecătorii, copiii și animalele de companie la o distanță sigură (cel puțin 15 metri) de zona de operare.
• Inspect the work area for objects that could be thrown or entangled in the cutting attachment. Remove any debris.
• Never modify the brush cutter. Use only manufacturer-approved attachments and replacement parts.

Siguranța combustibilului

• Manipulați combustibilul cu mare grijă. Combustibilul este foarte inflamabil.
• Mix fuel outdoors or in a well-ventilated area.
• Do not smoke or bring any flame or sparks near the fuel or the brush cutter.
• Depozitați combustibilul în recipiente omologate, într-un loc răcoros și bine ventilat, departe de surse de aprindere.

2. Conținutul pachetului

Verify that all items are present and undamaged upon unpacking. If any parts are missing or damaged, contact your retailer.

• Yato YT-84995 Engine Unit
• Ansamblu arbore
• Ansamblu ghidon
• Cutting Blade (255mm)
• Adunarea Gărzii
• Ham pentru umeri
• Trusă de scule (pentru asamblare)
• Sticla de amestecare a combustibilului
• Manual de instructiuni

3. Configurare și asamblare

Assembly is required before first use. Follow these steps carefully.

3.1 Atașarea ghidonului

1. Loosen the bolts on the handlebar clamp located on the shaft.
2. Position the handlebar assembly onto the shaft, ensuring it is centered and at a comfortable operating height.
3. Tighten the bolts securely to fix the handlebar in place.

3.2 Installing the Guard and Cutting Attachment

1. Attach the guard to the lower part of the shaft using the provided screws. Ensure it is firmly secured to protect against debris.
2. Mount the cutting blade onto the spindle, ensuring the correct orientation. Use the provided washers and nut, tightening them firmly.

Figura 1: Assembled Yato YT-84995 43cc Gasoline Brush Cutter. This image shows the complete brush cutter with its engine, shaft, handlebar, guard, and cutting blade. The main components are visible, including the fuel tank and the ergonomic handles.

3.3 Fuel Mixing

This brush cutter uses a 2-stroke engine and requires a specific fuel mixture.

• Amestecați benzina fără plumb cu ulei de motor în 2 timpi într-un raport de 40:1 (40 părți benzină la 1 parte ulei).
• Use the provided mixing bottle for accurate measurement.
• Shake the mixture thoroughly before pouring it into the fuel tank.

4. Instrucțiuni de utilizare

Familiarizați-vă cu comenzile și procedurile de operare înainte de a porni motorul.

4.1 Pornirea motorului

1. Așezați motocoasa pe o suprafață plană și stabilă.
2. Fill the fuel tank with the correct fuel mixture (0.85 L capacity).
3. Apăsați becul de amorsare de câteva ori până când combustibilul este vizibil.
4. Move the choke lever to the 'CLOSED' position.
5. Set the ignition switch to 'ON'.
6. Pull the starter cord firmly and steadily until the engine fires (usually 1-3 pulls).
7. După ce motorul pornește, mutați maneta de șoc în poziția „DESCHIS”.
8. Trageți din nou de șnurul de pornire până când motorul pornește și funcționează lin.
9. Lăsați motorul să se încălzească câteva momente înainte de a acționa accelerația.

4.2 Using the Brush Cutter

• Attach the shoulder harness and adjust it for comfortable and balanced operation. The anti-vibration system helps reduce fatigue.
• Hold the handlebar firmly with both hands. The adjustable contoured handle provides precise control.
• Maintain a firm footing and balance.
• Engage the throttle gradually to bring the cutting attachment up to speed.
• Cut with a sweeping motion, moving from right to left for optimal cutting and debris ejection.
• Avoid hitting hard objects like rocks or fences, as this can damage the blade or the machine.

4.3 Oprirea motorului

• Release the throttle to allow the engine to idle.
• Move the ignition switch to the 'OFF' position.
• Wait for all moving parts to come to a complete stop before setting the machine down.

5. Întreținere

Regular maintenance ensures optimal performance and extends the life of your brush cutter.

5.1 După fiecare utilizare

• Clean the exterior of the brush cutter, removing grass, dirt, and debris.
• Inspect the cutting blade for damage or dullness. Sharpen or replace as needed.
• Verificați strângerea tuturor piulițelor, șuruburilor și elementelor de fixare.

5.2 Întreținere periodică

• filtru de aer: Clean or replace the air filter regularly (every 10-20 hours of operation) to ensure proper engine performance.
• Bujie: Inspect and clean the spark plug. Replace if worn or fouled (every 50 hours of operation).
• Filtru de combustibil: Check and replace the fuel filter annually or if fuel delivery issues occur.
• Cap de angrenaj: Lubricate the gear head with appropriate grease periodically.

5.3 Depozitare

• Drain the fuel tank completely or use a fuel stabilizer if storing for more than 30 days.
• Clean the brush cutter thoroughly.
• Store in a dry, well-ventilated area, away from children and ignition sources.

6. Depanare

Consultați această secțiune pentru probleme frecvente și soluțiile aferente.

7. Specificații

• Marca: Yato - Poland
• Model: YT-84995
• Deplasarea motorului: 43 cm³
• Putere de ieșire: 1.4 kW (1.7 HP)
• Tip de combustibil: Gasoline (2-stroke mix)
• Fuel Mix Ratio: 40:1 (Benzină:Ulei pentru motoare în 2 timpi)
• Capacitatea rezervorului de combustibil: 0.85 L
• Cutting Blade Diameter: 255 mm
• Cutting Diameter (Line): 430 mm
• Sursa de alimentare: Alimentat cu gaz
• Asamblare necesară: Da

8. Garanție și asistență

For warranty information, please refer to the warranty card included with your product or contact your authorized Yato dealer. Keep your proof of purchase for any warranty claims.

For technical support, spare parts, or service, please contact your local Yato service center or visit the official Yato website. Provide your model number (YT-84995) and purchase details when seeking assistance.

Producător: Yato - Poland