Informații importante privind siguranța
Please read this instruction manual carefully before installing or operating your Brilliant Dody Outdoor Wall Light. Keep this manual for future reference. Improper installation or use can lead to electric shock, fire, or other hazards.
- Ensure the power supply is disconnected before installation, maintenance, or bulb replacement.
- Instalarea trebuie efectuată de către un electrician calificat dacă nu sunteți sigur de cablajul electric.
- This product is designed for outdoor use with an IP44 rating, providing protection against splashing water.
- Nu depășiți puterea maximătage specificat pentru bec.
Conținutul pachetului
Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:
- 1 x Brilliant Dody Outdoor Wall Light fixture
- Mounting material (screws, wall plugs)
- Manual de instructiuni
Nota: The E27 bulb is not included and must be purchased separately.
Configurare și instalare
- Pregătiți zona de instalare: Choose a suitable wall location for mounting. The recommended mounting height for optimal motion detection is 1.8 meters. Ensure the power supply to the installation area is switched off at the main circuit breaker.
- Marcați punctele de găurire: Hold the light fixture against the wall at the desired mounting height. Mark the positions for the drilling holes using a pencil.
- Găuri: Drill holes at the marked positions. Insert the provided wall plugs into the drilled holes.
- Conectare cablare: Carefully connect the electrical wires from your mains supply to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral, Earth). If you are unsure, consult a qualified electrician.
- Montați dispozitivul: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached.
- Instalați becul: Insert an E27 bulb (max 20W, LED compatible) into the lamp holder. Ensure the bulb is securely screwed in.
Imagine: față view of the Brilliant Dody Outdoor Wall Light, showing its sleek black and white design. This image illustrates the overall appearance of the fixture before installation.
Image: Close-up of the top section of the Brilliant Dody Outdoor Wall Light, highlighting the white diffuser and black trim. This view helps in understanding the bulb housing area.
Instrucțiuni de operare
The Brilliant Dody Outdoor Wall Light features an integrated motion detector for automatic operation. After installation, restore power to the fixture.
Motion Detector Settings:
The motion sensor has adjustable settings for 'TIME' and 'LUX'. These controls are typically located on the sensor unit itself.
Imagine: Detaliată view of the motion sensor and its adjustment dials (TIME and LUX) on the Brilliant Dody Outdoor Wall Light. This image shows where to find and adjust the sensor settings.
- TIMP: This dial controls how long the light remains on after motion is detected and no further motion is sensed. Rotate the dial to increase or decrease the duration.
- LUX: This dial determines the ambient light level at which the sensor becomes active. Rotate towards the sun icon for the sensor to activate in brighter conditions (daytime), or towards the moon icon for it to activate only in darker conditions (nighttime).
Zona de detectare:
- Unghi de detectare: 120°
- Interval de detectare: Up to 8 meters on both sides, with a maximum detection range of 10 meters.
- Înălțimea optimă de montare: 1.8 meters for best performance.
Întreţinere
- curatenie: To clean the fixture, ensure the power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the stainless steel finish or plastic diffuser.
- Înlocuire bec: Before replacing the bulb, ensure the power supply is disconnected. Allow the old bulb to cool down completely. Unscrew the old E27 bulb and replace it with a new E27 bulb (max 20W, LED compatible).
- Inspecţie: Periodically inspect the fixture for any signs of damage, loose connections, or wear.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde. | Fără alimentare. Bec defect. Incorrect LUX setting. | Verificați întrerupătorul. Înlocuiți becul. Adjust LUX dial towards the moon icon for darker conditions. |
| Lumina rămâne aprinsă continuu. | Mișcare constantă detectată. Setare TIMP incorectă. | Ensure no objects are constantly moving in the detection zone. Adjust TIME dial to a shorter duration. |
| Senzorul de mișcare nu detectează. | Obstrucție în calea de detecție. Incorrect LUX setting. Senzor murdar. | Îndepărtați orice obstacole. Adjust LUX dial towards the sun icon for brighter conditions, or ensure it's not set too low for current ambient light. Clean the sensor lens gently. |
Specificațiile produsului
- Marca: Genial
- Număr de model: 1000134854
- ASIN: B0B11KYHSW
- Dimensiuni (L x l x H): 17 x 7.6 x 40 cm
- Greutate: 490 de grame
- Material: Oţel inoxidabil
- Material umbra: Plastic
- Culoare: Negru
- Tip bec: E27 (becul nu este inclus)
- Max Wattage: 20W (LED compatible)
- Numar de becuri: 1
- Sursa de alimentare: Cablu electric
- Tip de instalare: Montare pe perete
- Caracteristica speciala: Detector de mișcare
- Evaluare IP: IP44 (Protecție împotriva stropilor de apă)
- Unghiul detectorului de mișcare: 120°
- Rază de acțiune a detectorului de mișcare: Up to 8m (both sides), max 10m
- Înălțimea optimă de montare: 1.8m
Garanție și suport
Information regarding specific warranty terms and customer support for Brilliant products may vary by region and retailer. Please refer to the documentation provided at the time of purchase or visit the official Brilliant webpentru informații detaliate despre garanție și contacte de asistență.
For technical assistance or inquiries, please contact Brilliant customer service through their official channels.