Introducere
This manual provides essential information for the proper installation, operation, and maintenance of your HEIMAN WS-720ES Wi-Fi Carbon Monoxide Detector. Please read it thoroughly before use and retain it for future reference.
Informații importante privind siguranța
Carbon monoxide (CO) is a colorless, odorless, and tasteless gas that can be fatal. This detector is designed to alert you to the presence of CO gas. It is not a substitute for proper maintenance of fuel-burning appliances or adequate ventilation.
- Nu ignora niciodată o alarmă. Investigate the source of the CO.
- Nu vopsiți detectorul. Paint can clog the sensor openings and prevent the alarm from functioning properly.
- Do not block the detector's vents.
Produs terminatview
The HEIMAN WS-720ES is a compact, portable Wi-Fi enabled carbon monoxide detector designed for various environments. It features a clear 85 dB alarm and LED indicators for status.
Instalare
The detector can be installed on flat surfaces or walls. Choose a location where CO is likely to accumulate, such as near fuel-burning appliances, but not directly above them or in areas with high humidity or extreme temperatures.
- Montare: Use the provided screws and wall plugs to secure the mounting plate to a wall or ceiling. Alternatively, the detector can be placed on a flat surface.
- Instalare baterie: Insert the two AA batteries into the battery compartment. Ensure correct polarity. The device will perform a self-test upon power-up.
- Plasare: For optimal detection, place the detector at eye level (approximately 1.5 to 1.7 meters from the floor) in areas with potential CO sources. Avoid corners or areas obstructed by furniture.
Wi-Fi Connection and App Integration
This detector connects to your home Wi-Fi network (2.4 GHz) and integrates with the Tuya or Smartlife application for remote monitoring and notifications.
- Descărcați aplicația: Descărcați aplicația „Tuya Smart” sau „Smart Life” din magazinul de aplicații al smartphone-ului dvs.
- Înregistrare/Autentificare: Creați un cont sau conectați-vă la contul dvs. existent.
- Adăugați dispozitiv: In the app, select "Add Device" and follow the on-screen instructions to add the Carbon Monoxide Detector. You may need to press the test button three times consecutively to put the device into pairing mode.
- Confirmare: Once connected, the app will display the device status and allow you to receive real-time alerts and view CO concentration levels.
Operarea detectorului
Indicatoare LED:
- Green LED (Power): Flashes every 30 seconds, indicating normal operation.
- Red LED (Alarm): Flashes rapidly with an audible alarm when CO is detected.
- Yellow LED (Fault/Low Battery): Indică o defecțiune sau o stare de baterie descărcată.
Testarea detectorului:
Press and hold the "Test/Silence" button for a few seconds. The alarm will sound, and the red LED will flash, indicating the unit is functioning correctly. A notification should also appear in your connected app.
Silencing an Alarm:
In case of a CO alarm, press the "Test/Silence" button to temporarily silence the audible alarm. The red LED will continue to flash until CO levels return to normal. If the alarm persists, evacuate the area immediately.
Întreţinere
- Înlocuire baterie: The detector uses 2 AA batteries with an estimated life of 5 years. When the yellow LED indicates low battery, replace both batteries with new ones.
- curatenie: Regularly clean the detector's exterior with a soft, damp pânză. Nu utilizați agenți de curățare sau solvenți.
- Testare regulată: Test the detector weekly by pressing the "Test/Silence" button.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Detector not powering on. | Baterii instalate incorect sau descărcate. | Verificați polaritatea bateriilor; înlocuiți bateriile. |
| LED galben intermitent. | Baterie descărcată sau defecțiune internă. | Replace batteries. If issue persists, contact support. |
| Nu mă pot conecta la Wi-Fi/aplicație. | Incorrect Wi-Fi password, 5GHz network, or device not in pairing mode. | Ensure 2.4GHz Wi-Fi, re-enter password, put device in pairing mode (press test button 3 times). |
| Alarm sounds frequently without apparent CO. | False alarm due to strong fumes (e.g., cleaning products) or detector placement. | Relocate the detector away from sources of fumes. Ensure proper ventilation. |
Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | WS-720ES |
| Sursa de alimentare | DC 2*1.5V Alkaline AA LR6 batteries |
| Durata de viață a senzorului | Max. 10 ani |
| Temperatura de operare | -10°C până la +40°C |
| Umiditatea de funcționare | 0% ~ 95% RH fără condensare |
| Nivel de sunet de alarmă | ≥85dB at 3m |
| Ieșire de alarmă | Indicație vizuală și sonoră |
| Perioada de încălzire | Aproximativ. 100 de secunde |
| Metoda de montare | Montare pe perete sau pe tavan |
| Standard de conformitate | EN 50291-1:2018 |
| Durata de viață a bateriei | 5 ani |
| Dimensiuni | 83 mm x 83 mm x 23 mm (aprox.) |
| Greutate | 230 g |
Garanție și suport
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official HEIMAN webPăstrați bonul fiscal ca dovadă a achiziției.
