ORTUR Laser Master 2 S2 LU2-2 and Rotary Roller Instruction Manual

1. Introducere

This manual provides essential instructions for the safe and effective operation of your ORTUR Laser Master 2 S2 LU2-2 laser engraver and the ORTUR Laser Rotary Roller (YRR2.0). Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance.

2. Informații de siguranță

WARNING: This product is a Class 4 laser device. Direct exposure to the laser beam can cause severe eye and skin damage. Always wear appropriate laser safety goggles during operation.

The ORTUR Laser Master 2 S2 LU2-2 incorporates several safety features:

• Protecție senzor G: Dacă mașina de gravat este deplasată sau înclinată în timpul funcționării, laserul se va opri automat.
• Laser Beam Stop Protection: If the computer system halts or the USB cable disconnects, causing the engraver to stop moving, the laser beam will automatically cease to prevent fire hazards.
• Idle Laser Shutdown: If the machine is powered on but remains stationary for an extended period, the laser will automatically turn off.
• Designul protecției ochilor: The panoramic filter glass protective cover filters 97% of ultraviolet light, reducing the need for additional goggles. However, wearing safety goggles is still highly recommended.

Image: ORTUR Laser Master 2 S2 LU2-2 showing dimensions (390x410mm engraving area) and four key safety features: Exposure Duration Detection, Laser Beam Safety Guard, Power Control System, and Position Movement Protection.

3. Caracteristicile produsului

3.1. Laser Engraver (Laser Master 2 S2 LU2-2)

• High-Performance Motherboard: Equipped with a 32-bit professional motherboard and ORTUR Laser 1.8 firmware, enabling faster and more precise operations with stepper motor speeds up to 5000 mm/min.
• Ultra-Fine Compression Laser: Features a 2100mW output laser with an ultra-fine focal area reduced to 0.07*0.06mm, allowing for detailed engraving.
• Suprafață mare de gravare: Provides a generous engraving area of 390*410mm.

Image: Comparison of the LU2-2's new compressed spot technology (0.07*0.06mm) versus other lasers (0.23*0.23mm), demonstrating finer detail in engraving results.

Image: Close-up of the 32-bit professional motherboard, highlighting its advanced components for increased speed and accuracy.

3.2. Laser Rotary Roller (YRR2.0)

• Cylindrical Object Engraving: Designed for engraving on cylindrical or small-diameter objects such as round wood, cups, bottles, pipes, bowls, guitars, drums, and tubes.
• Adjustable Diameters: Features 7 adjustable diameters, accommodating objects from 8mm to 100mm.
• Bracket Support: Includes a bracket with wheels to provide stable support for items like wine glasses during engraving.

Image: Diagram illustrating the 7 adjustable gear positions on the rotary roller, allowing for engraving on objects with diameters from 8mm to 100mm.

4. Configurare

4.1. Laser Engraver Assembly

The ORTUR Laser Master 2 S2 LU2-2 requires assembly. Follow the detailed instructions provided in the separate assembly guide included with your product. Ensure all components are securely fastened before proceeding.

4.2. Rotary Roller Installation (Optional)

To use the rotary roller, connect it to the laser engraver according to the rotary roller's specific installation instructions. Ensure it is properly aligned and secured for stable operation.

4.3. Instalare software

The ORTUR laser engraver is compatible with various engraving software:

• LaserGRBL: Free software, widely used for basic engraving tasks.
• LightBurn: Paid software, offering advanced features and greater control.

Download and install your preferred software from the official websites. Ensure your computer meets the system requirements:

• Sisteme de operare: Windows 7 / 8 / XP / 10 / 11, macOS, Linux.

Connect the engraver to your computer via USB after software installation.

5. Instrucțiuni de utilizare

5.1. Basic Engraving Process

1. Pregătiți materialul: Place your chosen material securely on the engraving bed.
2. Focalizarea laserului: Adjust the laser module height to achieve the optimal focal point on the material surface. Refer to your assembly guide for specific focusing methods.
3. Load Design: Open your engraving software (e.g., LaserGRBL, LightBurn) and load your desired design file.
4. Setați parametri: Configure engraving parameters such as power, speed, and passes based on the material type and desired effect.
5. Preview and Position: Folosește preinstalarea software-uluiview function to ensure the design is correctly positioned on the material.
6. Începeți gravura: Inițiați procesul de gravare din software. Always wear laser safety goggles during operation.

5.2. Using the Rotary Roller for Cylindrical Engraving

When engraving cylindrical objects, replace the standard engraving bed with the ORTUR Laser Rotary Roller. Ensure the object is securely placed on the rollers and properly aligned.

Image: The ORTUR Laser Rotary Roller in action, demonstrating 360-degree rotating engraving on a cylindrical object (e.g., a can), with a bracket providing support for items like wine glasses.

Adjust the rotary roller's diameter settings to match your object. In your engraving software, select the rotary engraving mode and adjust parameters accordingly. The machine will rotate the object while the laser engraves, creating a seamless design around its circumference.

5.3. Materiale compatibile

The ORTUR Laser Master 2 S2 LU2-2 can engrave on a wide range of materials, including but not limited to:

• Hârtie
• Bambus
• Lemn
• Piele
• placă PCB
• Oxid de aluminiu
• Metal (engraving only, not cutting)
• Glass (with appropriate preparation)

Imagine: Examples of various items engraved using the ORTUR laser engraver, including wine glasses, bottles, tumblers, rolling pins, rings, and pens, showcasing its wide applicability.

6. Întreținere

• Curățarea lentilei laser: Regularly inspect and clean the laser lens using a soft, lint-free cloth and appropriate lens cleaning solution to maintain optimal engraving quality.
• Curățați resturile: Remove any dust, smoke residue, or material debris from the engraving area and machine components after each use.
• Lubrifiați piesele în mișcare: Periodically lubricate the guide rails and lead screws with a suitable lubricant to ensure smooth movement.
• Verificați conexiunile: Asigurați-vă că toate cablurile și conexiunile sunt fixate și nu prezintă deteriorări.

7. Depanare

• Laserul se oprește pe neașteptate:
  • Check if the machine was bumped or tilted (G-sensor activated).
  • Verify USB cable connection to the computer.
  • Ensure the computer system is not halted.
  • If idle for too long, the laser will shut off automatically; restart the engraving process.
• Calitate slabă a gravurii:
  • Ensure the laser is properly focused on the material surface.
  • Curățați lentila laserului pentru a depista orice urmă de praf sau reziduuri.
  • Adjust engraving power and speed settings for the specific material.
• Aparatul nu răspunde:
  • Verificați alimentarea și conexiunile.
  • Verify USB connection to the computer.
  • Restart the engraving software and the machine.

8. Specificații

8.1. ORTUR Laser Master 2 S2 LU2-2

8.2. ORTUR Laser Rotary Roller (YRR2.0)

Image: Detailed specifications and dimensions of the ORTUR Laser Rotary Roller YRR2.0, showing its physical measurements.

9. Garanție și asistență

For warranty information and technical support, please refer to the documentation included with your product or visit the official Ortur website. You can also contact Ortur customer service for assistance with any issues or questions regarding your device.

Ortur Oficial Website: www.ortur.net