1. Introducere
This manual provides detailed instructions for the installation and operation of the NFHK NGFF Key A+E PCI Express to SATA 3.0 6Gbps Dual Port Adapter Converter, Model NF-SA-034. This adapter is designed to expand your system's storage capabilities by adding two SATA 3.0 interfaces via an available NGFF Key A+E slot. It is ideal for connecting SSDs or traditional hard drives, enhancing data transfer speeds and storage capacity.
2. Produs terminatview
The NFHK NGFF Key A+E PCI Express to SATA 3.0 Dual Port Adapter features the JMB582 main control chip, enabling high-speed data transfer and reliable performance. It provides two SATA 3.0 interfaces, supporting data rates of 6.0Gbps, 3.0Gbps, and 1.5Gbps. This adapter is designed for use in NGFF Key A+E PCI Express slots.
Caracteristici cheie:
- Dual SATA 3.0 Interfaces: Connect up to two SATA devices, including SSDs and HDDs.
- Transfer de date de mare viteză: Supports transmission rates of 6.0Gbps, 3.0Gbps, and 1.5Gbps.
- JMB582 Main Control Chip: Ensures stable and efficient performance.
- Hot-Swap and Hot-Plug Support: Allows for convenient device connection and disconnection without system shutdown.
- Gestionare avansată a energiei: Includes partial and sleep power management states for energy efficiency.
- Error Reporting, Recovery, and Correction: Enhances data integrity and reliability.
- Native Command Queue (NCQ) Support: Optimizes hard disk performance and stability under high load conditions.
- PCI Express Generation Support: Compatible with Gen1i, Gen1x, Gen2i, Gen2m, Gen2x, and Gen3i.
3. Conținutul pachetului
Vă rugăm să verificați dacă toate articolele sunt prezente în coletul dumneavoastră:
- NFHK NGFF Key A+E PCI Express to SATA 3.0 Dual Port Adapter Card
- Șurub de montare
- SATA Data Cables (quantity may vary, typically two)
4. Configurare și instalare
Follow these steps to install the NFHK NGFF Key A+E PCI Express to SATA 3.0 Dual Port Adapter into your system.
- Sistem de oprire: Ensure your computer or device is completely powered off and disconnected from the power source before beginning installation.
- Locate NGFF Key A+E Slot: Identify an available NGFF (M.2) Key A+E slot on your motherboard. This slot is commonly used for Wi-Fi cards.
- Adaptor de inserare: Carefully align the adapter card with the NGFF Key A+E slot. Gently push the card into the slot until it is fully seated.
- Adaptor securizat: Use the provided mounting screw to secure the adapter card in place.
- Conectați dispozitivele SATA: Connect your SATA SSDs or HDDs to the SATA 3.0 ports on the adapter using the provided SATA data cables. Ensure a secure connection.
- Sistem de pornire: Reconnect your system to the power source and power it on. The adapter typically does not require additional drivers for basic functionality, as it uses standard AHCI drivers built into most operating systems.
5. Instrucțiuni de utilizare
Once installed, the NFHK NGFF Key A+E PCI Express to SATA 3.0 Dual Port Adapter functions as a standard SATA controller. Connected drives will be detected by your operating system. You can use these drives for various purposes, including:
- System Disk: If your system BIOS/UEFI supports booting from an AHCI SATA controller in the M.2 slot, you may be able to install an operating system on a connected SSD.
- Spațiu de stocare suplimentar: Expand your system's storage capacity for data, applications, or media files.
- Schimbare la cald: The adapter supports hot-swap functionality, allowing you to connect or disconnect SATA devices while the system is running, provided the operating system and drive enclosure also support this feature.
6. Depanare
If you encounter issues with your NFHK NGFF Key A+E PCI Express to SATA 3.0 Dual Port Adapter, consider the following troubleshooting steps:
- Unități nedetectate:
- Ensure the adapter is fully seated in the NGFF Key A+E slot.
- Verify that SATA data cables are securely connected to both the adapter and the drives.
- Check that the SATA drives are properly powered.
- Confirm that your motherboard's NGFF slot is indeed a Key A+E type and supports PCIe functionality for storage. Some M.2 slots may be configured for SATA or NVMe only.
- Check your system's BIOS/UEFI settings to ensure the M.2 slot and SATA controllers are enabled.
- Performanță lentă:
- Ensure you are using SATA 3.0 compatible drives and cables.
- Verify that your operating system is using the correct AHCI drivers.
- The actual speed may be limited by the PCIe generation of your M.2 slot (e.g., PCIe 2.0 x1 offers a maximum of 5 Gbps, which is less than SATA 3.0's 6 Gbps).
- Instabilitatea sistemului:
- Asigurați-vă că unitatea de alimentare (PSU) a sistemului are suficientă energie electricătage to power all connected devices, especially if using multiple mechanical hard drives.
- Check for any physical damage to the adapter or cables.
- Probleme de bootare:
- Some older motherboards or BIOS versions may not support booting from an add-on SATA controller in an M.2 slot. If this is the case, use the adapter for secondary storage only.
7. Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Numărul de model | NF-SA-034 |
| Cip de control principal | JMB582 |
| Interfață | NGFF Key A+E PCI Express |
| Porturi SATA | 2 x SATA 3.0 |
| Rate de transfer de date | 6.0 Gbps, 3.0 Gbps, 1.5 Gbps |
| Dimensiuni (L x l x H) | 3.94 x 3.94 x 0.39 inci (aprox.) |
| Greutatea articolului | 1.41 uncii (aprox.) |
| Dispozitive compatibile | Personal Computer with NGFF Key A+E slot |
8. Garanție și asistență
For warranty information, technical support, or further inquiries regarding your NFHK product, please refer to the manufacturer's official website-ul lor sau contactați serviciul lor de asistență pentru clienți. Puteți găsi mai multe informații la www.cablecc.com.
